BREITLING Chronomat Automatic 36 Men’s Calendar Wrist Watch Instruction Manual
- June 9, 2024
- BREITLING
Table of Contents
BREITLING Chronomat Automatic 36 Men’s Calendar Wrist Watch
OVERVIEW
YOUR BREITLING CHRONOMETER
- A chronometer is a high-precision instrument that has successfully passed the entire battery of tests imposed by COSC (Swiss Official Chronometer Testing Institute), a neutral and independent body that individually tests each movement according to the prescriptions in force.
- The certification test for wristwatches with sprung balance oscillators, according to standard ISO 3159, consists of observing each movement for 15 days and 15 nights, in 5 positions and at 3 different temperatures (8°C, 23°C, 38°C). In order to earn the prestigious chronometer label, a movement’s performances must meet 7 very strict criteria, including a daily variation in a rate ranging between only -4/+6 seconds.
- The term “chronometer” should not be confused with that of “chronograph”, which is a complicated watch fitted with an additional mechanism for measurement of the duration of an event. A chronograph is not necessarily chronometer-certified, but all Breitling chronographs bear the much-coveted title of “chronometer”.
PREPARATION FOR USE
WINDING – TIME-SETTING
- Wind the watch through approximately 40 clockwise turns of the crown.
- Pull the crown out to position 2, and turn it counterclockwise to adjust the calendar to the day prior to the activation date.
- Pull the crown out to position 3. Turn the hands forward until the correct date jumps into place, at midnight. Then adjust the hour and minute.
- Push the crown back into position 1.
SPECIAL CHARACTERISTICS
RIDER-TAB BEZEL
- The bezel of your watch is fi tted with 4 hour-markers called rider-tabs : they are used as points of reference to mark a start time or a limit time you wish to remember. On models without a chronograph, they also provide a “minute chronograph” function enabling you to measure time elapsed in minutes.
- Rider-tabs make it easier to rotate the bezel by giving a better grip (especially when wearing gloves) and additionally protect the glass.
SUN COMPASS
Your Breitling chronometer may be used as a sun compass, thus enabling you to determine North and South. For regions that have instated daylight saving time, subtract one hour when aligning the watch.
- In the Northern Hemisphere
- Point the hour hand precisely towards the sun. In relation to the watch dial, the point located midway between the current time and 12 o’clock indicates South, North being exactly opposite.
- In the Southern Hemisphere
- Point the hour-marker located at 12 o’clock on the dial precisely towards the sun. In relation to the watch dial, the point located midway between the current time and 12 o’clock indicates North, South being exactly opposite.
MAINTENANCE
- Your Breitling chronometer is a sophisticated instrument which is constantly subjected to a wide variety of stresses and strains. Within a very small volume, a large number of components contribute to handling all the functions.
- Their mechanical action inevitably leads to a certain amount of wear and tear, which may be controlled by maintenance con-sisting of relubrication and replacing worn components.
- Like any precision measurement instrument, your watch must be regularly maintained in order to function at its highest level of potential: the frequency of this operation varies according to actual use. Breitling or your authorized retailer will be happy to handle the procedure.
WATER RESISTANCE
The movement of your chronometer is protected by a complex case fi tted with gaskets to ensure its water resistance. Under the infl uence of various external agents – perspiration, chlorinated or salt water, cosmetics, fragrances or dust – these gaskets gradually deterio-rate. That is why water resistance cannot be permanently guaranteed. If used intensively in water, we recommend having an annual water resistance check conducted. In any event, such an appraisal must be done every two years. This operation, which takes only a few minutes, may be conducted by a Breitling authorized maintenance centre, or by an authorized retailer (www.breitling.com).
Breitling models are water-resistant to varying degrees. The extent of the
water resistance, expressed in metres (M), is a standard value and does not
indicate an absolute immersion depth. The crown and pushpieces must not under
any circumstances be operated under water or when the watch is wet. The table
below indicates the conditions in which your watch may reasonably be used,
according to its degree of water resistance:
If your watch is equipped with a screw-lock crown, ensure that this is locked before any use in water. This also applies to screw-lock pushpieces.
USEFUL TIPS
Breitling genuine leather straps are crafted with the most refi ned materials
and represent extremely high-quality products. Like all objects in natural
skin (shoes, gloves, etc.), their length of life varies considerably,
according to the conditions in which they are worn. ln particular, water,
cosmetics and perspiration accelerate the ageing process. A metal or synthetic
Breitling bracelet is thus better suited to activities involving frequent
contact with water or moisture.
Breitling metal cases and bracelets are made from the fi nest alloys and
guarantee stur-diness and wearer comfort. Regular cleaning by rinsing and
brushing in clean water will keep your watch shiny. This operation is strongly
recommended after each immersion in salty or chlorinated water. For watches fi
tted with a leather strap, the same advice applies, as well as avoiding
getting the strap wet.
WHAT TO AVOID
Like any valuable objects, Breitling chronometers deserve special care. It is important to protect them from jarring and knocks by hard objects, and not to expose them to chemical products, solvents, dangerous gases, or magnetic fi elds. Moreover, your Breitling chronom-eter is designed to run smoothly at temperatures ranging between 0°C and 50°C.
This booklet is completely made from residues of sugar cane instead of wood. The paper is biodegradable, compostable, and recyclable.
Breitling Automatic
YOUR BREITLING CHRONOMETER
A chronometer is a high-precision time-keeping instrument that has
successfully passed the entire battery of tests imposed by the COSC (Swiss
Official Chronometer Testing Institute), a neutral and independent body which
individually tests each movement according to the specifications in force.
CAUTION
Mechanical watches with date, day, month, and moon-phase indicators are
equipped with a complex mechanism that is set in motion between 8 pm and 3 am.
It is vital to avoid adjusting the calendar or moving the hands backwards
during this period.
-
STEP 1
Check whether the crown should be unscrewed (counterclockwise) before you carry out the following steps. -
STEP 2
Wind the watch with approximately 40 clockwise turns of the crown. -
STEP 3
If the watch has no date aperture, pull the crown out to position 2. Set the hour and minute hands. If the watch does have a date aperture, proceed as follows: pull the crown out to position 3. Turn it so that the hour and minute hands point to 06:25. Push the crown into position 2. Turn it counterclockwise or clockwise to set the date to the previous day. Pull the crown out to position 3. Turn the hands forwards until the correct date appears at midnight. Set the hour and minute hands. -
STEP 4
Push the crown back into position 1. If you had to unscrew the crown in step 1, follow this final step: press the crown gently, turning it clockwise, then tighten it again until you feel some resistance. Do not force it! -
STEP 5
For further details, please refer to the full User Manualwhich can be accessed by scanning the QR Code on the Quick Start Guide or visit www.breitling.com /user-manuals.
Please note that the diagram above is meant for illustrative purposes and
might slightly differ from reality
- 8) DATE APERTURE
WHAT TO AVOID
Like any valuable object, Breitling chronometers deserve special care. It is important to protect them from jarring and knocks by hard objects. Do not expose them to chemical products, solvents, dangerous gases, or magnetic fields. Your Breitling chronometer is designed to run smoothly at temperatures ranging between 0°C and 50°C.
WARRANTY
Please check if your warranty has been activated by scanning the QR Code. Note
that Breitling watches purchased from an authorized Breitling retailer are
guaranteed against any manufacturing defects, as indicated on our website
under www.breitling.com/international-warranty
Detailed information about the specific warranty terms, coverage and
exclusions applicable to your product is accessible in your warranty account
at www.breitling.com/my-account
Detailed information about our after-sales service and applicable terms and
conditions is accessible on our website under www.breitling.com/service-
terms
© June 2020, Breitling SA, Switzerland
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>