hombli LHO00044 Smart Outdoor String Light User Manual
- June 6, 2024
- hombli
Table of Contents
hombli LHO00044 Smart Outdoor String Light
Thanks for your purchase!
With the Hombli Smart Outdoor String Light you can bring your garden, patio,
balcony and other outdoor space to life with a cozy warm glow’ In this manual
you will find a clear explanation of the steps you need to follow to
successfully install your String Light
Content
Follow the steps below in chronological order to successfully install the Smart Outdoor String Light Some steps are optional.
1. Preparation indoors
2. Installing outdoors
3. Connect to Google and Alexa
Safety warnings
- This product is IP65 weather resistant Which means it’s splash proof, but can’t be submerged in water
- Make sure the bulbs are not pointing upwards to prevent water from seeping into the rubber seal
- Avoid direct contact with the ground to prevent damage
- Do not install this product in enclosed spaces such as cabinets
- Ensure that the String Light hangs free from obstacles
- Keep out of reach from children
What’s in the box?
1. Hombli Smart Outdoor String Light Sm
2. Connector wire 2.5m
3. Power adapter 12V/2A
4. Filament bulbs (10+2 extra)
Preparation indoors
Follow the steps below to connect the Smart Outdoor String Light to the Hombli app and your Wi-Fi network.
Carefully unpack the String Light and attach all light bulbs to the bulb
sockets
Installing the String Light Extension (sold separately) 11&1
Untwist the cap at the end of the Smart Outdoor String Light. Connect the
extension and tighten the ring so it is secure and watertight
Use the 2.5m connector wire to attach the power adapter to the String Light
Download the Hombli App
*Create an account or continue in “Try now”mode
**
Create a family
Add a new product
Select the String Light from the Lighting category
Connect the plug to a power outlet to turn on the String Light. The light
bulbs will now flash rapidly
Select the correct Wi-Fi network and enter the password.
NOTE: This product is only compatible with 2.4 GHz networks.
Continue to the next screen. Assign the String Light to a room and it’s ready for use.
Installing outdoors
Follow these steps to install the String Light
Connect to a power outlet to check if you have a proper Wi-Fi connection and signal at the spot you want to install the String Light
Mount the String Light
NOTE: Disconnect the plug before installing. Use the mounting holes on top of the light bulb sockets to hang the lights. Avoid tension on the wire and on the plug.
For everyone of material vau can attach the Hombli string light with different methods and fastening accessories. These accessories can include guide wires, 5-hooks, and cable ties. Because eve,y situation is different, accessories are not included with the String Light Please consult your local DIY store if vau is unsure what hardware to use.
Option 1: Mount the String Light directly to a solid structure by attaching 5-hooks, rings or cable ties to the mounting holes of every third light bulb socket
Option 2: Mount the String Light to a tensioned guide wire by attaching hooks, rings, or cable ties to the mounting holes of each light bulb socket. The guide wire should be as tight as possible and properly connected to a solid structure
Connect the plug to a power outlet
The setup is finished. It’s time to enjoy your Hombli product!
Inspiration
Hang the String Light in your garden, patio or balcony to create a relaxed ambiance
Want to cover larger areas with a warm glow? Extend the String Light up to 15 meters with the String Light Extension (max.2)
Create a Scenario to automatically turn on the String Light at sunset
Cleaning
- Make sure to unplug the device from an electrical outlet before cleaning
- , Use a soft cloth with neutral cleanser to clean the device
- Never use aggressive or flammable cleaning agents such as bleach and alcohol to clean any part of the device
- Make sure no water or any other liquids gets in the device