legrand RT-20 Router User Guide

: June 3, 2024
: Legrand

Table of Contents

legrand RT-20 Router
How can it use
How Do I
Technical Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

legrand RT-20 Router

How can it use

Setting up your router:
Place your router in a rack or on a desktop
Connect an Ethernet cable from your telco/ISP modem/router to the WAN 1 port of your router. Connect the included power cable from your router to your power source
Download the Easy Setup App
or search “Luxul Easy Setup App” on:
- Connect a computer to one of the LAN ports of your router. Open a web browser and go to 192.168.0.1

Login with the default User Name and password

User Name: admin
Password: Unique to device, found on device label

NOTE: You will be required to change the default administrator password. The WAN port will be disabled until a new password is selected
NOTE: If your computer or device isn’t set to obtain an IP address automatically, you’ll need to set a temporary static IP address on that device. Set the IP address of your computer to an address in the 192.168.0.X range, then set the Gateway/router address to 192.168.0.1

How Do I

Restore factory default settings?
To restore factory default settings to your router, press and hold the button labeled ‘RESET’ until the ‘System LED’ starts blinking rapidly
Restart my router?
To restart your router, press and quickly release the button labeled ‘RESET’.

Perform advanced configuration?

Open a web browser and go to 192.168.0.1 or the IP address you specified during the setup process
Enter the login credentials you created during the setup process

What do the LEDs on my router indicate?

Indicator	State	Description
Power	On	Router is powered
Off	Power disconnected or router off
System	Heartbeat	Normal operation
Slow blinking	Router rebooting
Fast blinking	Router returning to factory default settings
Off	Router error
USB	On	USB device is connected
Blinking	USB device activity

WAN/LAN

Front

| Top row on| 10/100Mbps device connected
Bottom row on| 1000Mbps device connected
Blinking| Data being transferred
WAN/LAN

Rear

| Yellow on| 10/100Mbps device connected
Green on| 1000Mbps device connected
Blinking| Data being transferred

View Luxul’s Privacy policy at:

https://www.legrandav.com/legal/privacy_policy
The marking information is located at the bottom of the apparatus
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purpose without permission in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design. No license is granted, either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied license only exists for equipment, circuits and subsystems contained in this or any Luxul product. © Copyright 2022 Legrand AV Inc. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply Connected are all trademarks and or registered trademarks of Legrand AV Inc. All other trademarks and registered trademarks are the property of their respective holders.