MAXIM LIGHTING 3496WGOB Sutton Place VX Large 2-Light Outdoor Sconce User Manual
- June 3, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 3496WGOB Sutton Place VX Large 2-Light Outdoor Sconce User
Manual
Please consult a qualified electrician for hanging fixture and wiring.
Light Source : 2 X E12 Candelabra 60W ( Not Included )
Made in China / Hecho en China / Fabrique en China
Before Getting Started
-
Read the instructions carefully prior to assembling the product.
-
When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
-
Carefully remove all packaging materials and retain for future use.
-
Keep all hardware parts and packaging out of reach of small children.
-
Choose a clean, level, spacious assembly area.
Avoid hard surfaces that may damage the product. -
Ensure that you have all required contents for complete assembly.
-
Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
-
Do not over tighten the screws and bolts as this may damage the threads.
-
Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Do not plug the product in if cord is torn or frayed.
For outdoor use, caulk around fixture with silicone sealant to prevent water intrusion.
Cleaning & Maintenance
-
Apply a high quality car wax to the fixture regularly to protect from environmental factors that can damage the metal.
-
Clean with soft cloth and a mild detergent.
DO not use abrasive cleaner. -
Periodically (every 90 days) make sure that the screws are fully tightened.
-
Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Contents
Before getting, started, ensure the package contains the following components:
A|
FRAME
| x1
---|---|---
B|
UPPER COVER
| x1
C|
GLASS PANEL
| x4
D|
GLASS CLIP
| x4
E|
WIRE NUT
| x3
F|
SCREW M4*6
| x4
G|
SCREW 8/32*25mm
| x2
H|
SCREW 8/32*10mm
| x2
Assembly Instructions
-
This step requires removing the mounting plate from the fixture.
-
Caulk around backplate where fixture meets the wall leave a hole at the bottom to allow water to escape.
-
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>