Maxim Lighting 39746 Starfire 18 Light Pendant User Guide

Item/Model Number; 39746
Starfire 18-Light Pendant

Lamping | Ampoule: 18 x G9 40W Bulb{Included)
Please consulf a qualified electrician prior to install
Made in China

Before Getting Started

Read the instructions carefully prior to assembling  the product.
When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach or small children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you intend to install it.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep packaging materials away from children.

Lamp Care Instructions

Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock!
Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Check the product cord to be sure is free torn or frayed.
Caution: Xenon bulbs may burn you. Lamps should remain off for a minimum of 10 minutes before handling.

Cleaning & Maintenance

On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners. Periodically (every 90-180 days) make sure that the screws are fully tightened.
Prolonged exposureto heat sources may cause glazing, maltingand scorching, or even cause color to fade.

PARTS

Before getting,started,ensure the package contains the following components:

Install top loop to canopy and attach appropriate amount of chain to loop to achieve desired mounting height. Thread wire through every 3rd loop of chain.
Remove ring from loop and slide down chain. Place canopy onto chain and let slide to top of fixture. Install nipple and cross bar into top of chain loop.
Install color coded stems into corresponding colored threaded hole.
Install spoke balls onto end of red stems and secure with cap stem.
Install beveled crystal onto end of chrome stems and secure with cap stem.

Model: 39746
Crystal Diagram

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>