MAXIM LIGHTING 57690 Chip LED Flush Mount Instruction Manual
- May 15, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 57690 Chip LED Flush Mount
Please consult a qualified electrician for hanging fixture and wiring.
Light Source : LED Integrated 11W / 16W / 18W 120V 60Hz
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
CONTENTS
Before getting, started, ensure the package contains the following components
A
|
|
x1
---|---|---
B
| |
x1
C
|
8#-32 SCREW
|
x2
D
| |
x3
E
|
|
F
|
|
G
|
|
INSTALLATION INSTRUCTIONS
- Prior to installation, install the mounting plate on the junction box with mounting screws. Drive screws completely to the end of the junction box.
- Connect supply wires to wires on fixture with wire nuts. Connect white to white, black to black and copper wire to copper wire as grounding connection.
- Completing the installation by pushing the fixture into the mounting plate.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>