Maxim Lighting 57645 Diverse 7.5 LED Flush Mount Instruction Manual

Maxim Lighting 57645 Diverse 7.5 LED Flush Mount

Specifications

• Item/Model Number: 57645 Diverse 7.5 LED Flush Mount – 5CCT
• 1 x LED 13.5W (Included)

Product Information

• The 57645 Diverse 7.5 LED Flush Mount is a versatile lighting fixture suitable for various applications. It comes with a powerful 13.5W LED bulb included, providing efficient and long-lasting illumination.
• This product is designed for installation in 3-0 or 4-0 holes and includes stickers to cover any unused holes for a clean finish.
• It features a ground wire (green wire) for safe electrical connection and is labeled for easy identification of positive (L) and neutral (N) wires.

Product Usage Instructions

1. Installation: Ensure the fixture is compatible with the existing hole size. Use the provided stickers to cover any unused holes. Connect the ground wire securely.
2. Wiring: Connect the positive (L) and neutral (N) wires following standard electrical practices.
3. Power On: Once installed, turn on the power to enjoy the bright and energy-efficient lighting provided by the LED bulb.

FAQ :

• Q: Is this product compatible with dimmer switches?
  A: Yes, this LED flush mount is compatible with most standard dimmer switches, allowing you to adjust the brightness according to your preference.

• Q: Can this fixture be mounted on a sloped ceiling?
  A: This fixture is designed for installation on flat ceilings. Mounting on a sloped ceiling may affect the performance and stability of the product.

Item/Model Number: 57645

• Diverse 7.5″ LED Flush Mount – 5CCT
• LAMPING: 1 x LED 13.5W (Included)

Before Getting Started

• Read the instructions carefully prior to assembling the product.
• When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain for future use.
• Keep all hardware parts and packaging out of reach of children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all required contents for complete assembly.
• Take care when lifting. Assemble the product in close proximity to where you intend to install it.
• Do not over tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.
• Risk of suffocation!
  • Keep packaging materials away from children.

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product.
• Caution there is a risk of shock! Disconnect from power source before assembling or cleaning.
• Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire
• . Check the product cord to be sure is free torn or frayed.

Cleaning & Maintenance

• On polished finishes, often using tale powder can reduce the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
• Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
• Periodically (every 90-180 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing. melting and scorching, or even cause color to fade.

PARTS

Before getting, started, ensure the package contains the following components :

For outdoor use, caulk around fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.

DIMMER COMPATIBILITY

MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required

• ITEM/MODEL:
• 57645WTXX-5CCT VERIFIED LIST OF TESTED DIMMERS
• Lutron Diva DVCL-153P
• Lutron Diva DVELV-300P
• Lutron Diva Caseta PD-6WCL
• Lutron Maestro MACL-153M
• DEAKO-Smart Dimmer DEAKO-Single
• Dimmer LEVITON 6672-L LEVITON DSL06
• GENERAL COMPATIBILITY TRIAC / FORWARD PHASE ELV / REVERSE PHASE
• Only at 120VAC Due to inrush current, wattage should not exceed 150W on a 600W dimmer
• IMPORTANT!
• If the control is not paired properly to LED fixtures, irreparable damage may occur.
• If the dimmer you are using is not listed her consult a lighting professional or view our Dimming Compatibility Chart online: https://www.maximlighting.com/led-dimmer

© 2023 MAXIM LIGHTING

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>