ROSWELL C920-20130 Cybox Bluetooth Interface Owner’s Manual
- June 4, 2024
- ROSWELL
Table of Contents
ROSWELL C920-20130 Cybox Bluetooth Interface
ATTENTION
Multiple devices can be paired to the CYBOX but only one device can connect
at one time. The CYBOX will remember the last device which was connected to it
and will reconnect with it automatically. If that device is not active, then
other paired devices can connect manually, or new devices can be paired. When
a connected device is out of range for more than one minute, the CYBOX will
automatically disconnect it and returns to pairing mode (the LED starts
blinking).
Features
Connections
- Power: 12V DC
- Current consumption: 40mA max
- Bluetooth 4.1/Transmission power <1omW EIRP
- Audio frequency range: 20Hz-20kHz
- Audio output level 4 V RMS
Specification
- Power: 12V DC
- Current consumption: 40mA max
- Bluetooth 4.1/Transmission power <1omW EIRP
- Audio frequency range: 20Hz-20kHz
- Audio output level 4 V RMS
Operation Instructions
Pairing your Device (Required for Operation)
- Ensure that your streaming device has Bluetooth enabled.
- Turn the ignition (ACC) on.
- The LED will start blinking to show it is in pairing mode
- Select CYBOX in your devices Bluetooth setup menu.
- When successfully connected, the LED on the CYBOX will stop blinking and will remain lit
- A single beep will be heard through the connected sound system.
Co_ntrolling Audio Playback
Once connected. audio is controlled from the streaming device. This includes
volume. and media selection
The Cybox can be installed out of sight, as it has no user controls that needs
to be accessed.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>