HOMLUX Rectangle LED Bathroom Mirror Instruction Manual
- June 4, 2024
- HOMLUX
Table of Contents
HOMLUX Rectangle LED Bathroom Mirror Instruction Manual
Instructions & Installation
Statement
Please read this instruction carefully before installation, and refer to it
again during the installation to ensure a safe and correct installation of the
mirror.
Compliance
All the electrical components used in this product are ETL LISTED. This
product passed ETL certification.
Electrical Safety Instructions
⚠ INSTALLATION should be made by a qualified / registered electrician. DO
NOT attempt to install it by yourself, as will not be responsible for any
damage caused during installation.
⚠ According to IEEE regulations, this product is suitable for zone 2 and
external zone, not zone O or zone 1. It is also not suitable for installation
in saunas, steam rooms or shower cubicles.
⚠ This product is only suitable for permanent installation, please do not plug
in the power strip.
⚠ Please make sure to keep the electrical supply off during installation and
maintenance. It is recommended to pull out the fuse or switch off the circuit
breaker before installation to disconnect the necessary circuits.
⚠ HOMLUX LED mirror adopts three-pin plug and power leads must be connected
to ground wire.
⚠ DO NOT put hard and sharp materials directly against the mirror surface
during operation, otherwise it may result in current leakage and even personal
injury accident.
⚠ Never forget to turn off the power supply in days, otherwise electric
components of the product could be damaged.
⚠ DO NOT switch off the power supply directly during normal operation,
otherwise electric elements of the product may be easily damaged.
⚠ Please turn off the power supply if the product is not used for a long time.
⚠ DO NOT remove protective film or corner protectors until the mirror is
completely installed.
⚠ PLEASE KEEP THIS MANUAL BOOK FOR FUTURE REFERENCE.
Wiring
HOMLUX supplies an about ft long power cable and U.S 3-pin plug for easy
connection with a wall socket. Optional to cut the plug directly and connect
to electrical wiring if using the wall switch.
Cleaning
When the mirror has to be cleaned, please switch off the power first.
DO NOT use abrasives or solvents when cleaning.
DO NOT let water get in the mirror and submerge mirror in water.
Wipe off all water spillages as soon as possible via a soft, damp cloth.
Specification
Operation Instructions –3000K-6000K
Installation
Parts List
Operation Instructions —6000K-6500K
Installation
Parts List
Step 1
Measure the distance between two holes on the aluminum strip.
Step 2
According to the distance from A, choose a suitable height and punch holes in
the wall.
Step 3
Drive the expansion plug into the hole on the wall and then put the screw into
the expansion plug to fix the aluminum strip on the wall.
Step 4
Hang the mirror on the wall.
About the wire connection
There are two ways to connect the circuit for the mirror.
Connection way (1): Plug the 3-pin plug in the socket on the wall.
Connection way (2): Cut of the plug, and connect the mirror’s wire to the wall switch’s wire. (Recommend installation by professional electrician)
Thanks for choosing HOMLUX.
Web: www.homluxproducts.com
Any query, please feel free to email our service team :
[email protected]
Scan the QR code to watch the video of installation.
AFTER-SALES SERVICE CARD
We sincerely thank you for trusting our service and our products, and may this
product add enrichment to your home. We guarantee that the product has
undergone strict quality inspection and meticulous packaging. If you encounter
any issue regarding either shipping or the product, please feel free to
contact us at any time.
We’d be more than happy to serve you wholeheartedly. Yours Sincerely
- Please clean with a damp cloth and wipe dry.
- Please avoid harsh, corrosive and abrasive cleaners.
- Keep dry and avoid damp environments.
Customer Service: ( 800) 209-3199 (MON -FRI 9:00am-5:00pm Eastern Time)
or[email protected]
Address: 100 Pottery Road, Commerce, GA 30529
If you have any questions or concerns, please feel free to contact us.
We’re committed to providing our customers with the quality service.