HOMLUX MA04R24TD-OL LED Wall Mounted Mirror Instruction Manual
- October 30, 2023
- HOMLUX
Table of Contents
HOMLUX MA04R24TD-OL LED Wall Mounted Mirror
Product Information
The LED Wall-mounted Mirror is a modern illuminated round mirror with an anti- fog feature and memory function. It is designed to be wall-mounted and has a 5mm glass thickness. The mirror is made of copper-free silvered glass and aluminum frame and can change between warm, white, and warm white light colors. The mirror has a touch sensor and is IP44 rated. It comes with a horizontal hanging way and has a 1-year warranty. The input voltage is 110v, and the power, lumen, input frequency, and color temperature are specified on the product label.
Product Usage Instructions
Before installation, please read the instruction manual carefully and refer to it again during installation to ensure a safe and correct installation of the mirror. The electrical installation should only be done by a qualified/registered electrician, and it is not recommended to install it by yourself as the company will not be responsible for any damage caused during installation.
The mirror is suitable for zone 2 and external zone, not zone 0 or zone 1, and it is not suitable for installation in saunas, steam rooms or shower cubicles.
When cleaning the mirror, switch off the power first. Do not use abrasives or solvents when cleaning, and do not let water get in the mirror or submerge mirror in water. Wipe off all water spillages as soon as possible via a soft, damp cloth.
Operation Instructions
- To turn on the light, press the power button once.
- Press the power button again to change the light to white light.
- Press the power button a third time to change the light to warm white light.
- Press the power button a fourth time to turn off the light.
For dimming, hold down the power button, and the brightness will change accordingly. To use the fog-free function, press the button, and the mirror can be defogged.
Installation Instructions
The installation will require a ruler, spirit level, electrical drill, screwdriver, hammer, 3 x screws and white nylon screw type plug, and 4 x spacers.
- Stick spacers on the mirror backside to keep the mirror flat, and measure the distance of A (two hooks center distance).
- Mark two dots on the wall with the length of A/B then drill holes into those marks.
- Place the white nylon plugs into the holes in the wall then screw the screws into the plug.
- Hang the mirror on the wall.
The product comes with an about 3.6-4.3 long power cable and a U.S 3-pin plug for easy connection with a wall socket. The product can connect the cord to the wall and be controlled by a wall switch.
Instructions & Installation
Statement
Please read this instruction carefully before installation, and refer to it
again during the installation to ensure a safe and correct installation of the
mirror.
Compliance
All the electrical components used in this product are ETL LISTED. This
product passed ETL certification.
Electrical Safety Instructions
- INSTALLATION should be made by a qualified / registered electrician. DO NOT attempt to install it by yourself, as HOMLUX will not be responsible for any damage caused during installation.
- According to IEEE regulations, this product is suitable for zone 2 and external zone, not zone 0 or zone 1. It is also not suitable for installation in saunas, steam rooms or shower cubicles.
- This product is only suitable for permanent installation, please do not plug in the power strip.
- Please make sure to keep the electrical supply off during installation and maintenance. It is recommended to pull out the fuse or switch off the circuit breaker before installation to disconnect the necessary circuits.
- HOMLUX LED mirror adopts three-pin plug, power leads must be connected to ground wire.
- DO NOT put hard and sharp materials directly against the mirror surface during operation, otherwise it may result in current leakage and even personal injury accident.
- Never forget to turn off the power supply in storm days, otherwise electric components of the product could be damaged.
- DO NOT switch off the power supply directly during normal operation, otherwise electric elements of the product may be easily damaged.
- Please turn off the power supply if the product is not used for a long time.
- DO NOT remove protective film or corner protectors until the mirror is completely installed.
- PLEASE KEEP THIS MANUAL BOOK FOR FUTURE REFERENCE.
Wiring
HOMLUX supplies an about 3.6-4.3? long power cable and U.S 3-pin plug for easy connec?on with a wall socket. This product can connect the cord to the wall and be controlled by a wall switch.
Cleaning
When the mirror has to be cleaned, please switch off the power first.
DO NOT use abrasives or solvents when cleaning.
DO NOT let water get in the mirror and submerge mirror in water.
Wipe off all water spillages as soon as possible via a soft, damp cloth.
Specifications
Operation Instructions
Light on/off
- Power on, then press to turn on, that light will be warm light.
- Second time you press the light will change to white light
- Third time you press the light will change to warm white light
- Press a fourth time to turn light off.
Dimming instruction
Power on, then press to turn on. Hold down and the brightness will change
accordingly.
Fog-free instruction
( For the led mirror with anti-fog function)
Power on, press , the mirror can be defogging.
Installation
-
Step 1
Stick spacers on mirror backside to keep the mirror flat, and measure the distance of A(two hooks center distance).SKU| Model Size| Measurement A(mm)
---|---|---
F1A300494E| MA04R24TD-OL| 82±5mm
96FB004795| MA04R32TD-OL| 388±5mm
621A004796| MA04R36TD-OL| 388±5mm
A50E004797| MA05R24TD-OL| 82±5mm
692D004793| MA05R32TD-OL| 388±5mm
27D7004792| MA05R36TD-OL| 388±5mm -
Step 2
Mark two dots on the wall with the length of A/B then drill holes into those marks. -
Step 3
Place the white nylon plugs into the holes in the wall then screw the screws into the plug. -
Step 4
Hang the mirror to wall.
About the wire connection
There are two ways to connect the circuit for the mirror.
Connection way : Plug the 3-pin plug in the socket on the wall. Connection way 2 : Connect the mirror wire with wall switch wire via connector.
Thanks for choosing HOMLUX.
- Web: www.homluxproducts.com
- Tel: (800) 209-3199
- Any query please feel free to email service team : help@homluxproducts.com
Scan the QR code to watch the video of installa?on.
CARE AND MAINTENANCE
- Please wipe the mirror with a so? dry cloth or co?on to avoid scratching the mirror.
- Please avoid harsh, corrosive, and abrasive cleaners.
- Keep dry and avoid damp environments.
- We provide a 1-year warranty (Excludes artificial damage and normal wear and tear). 1 year warranty period shall not be extended or renewed by the repair or replacement of the product/parts.
If you have any problems, please feel free to contact us. We enjoy hearing from our customers!