HOMLUX 2E08004AEE Small Round Steel Framed Classic Wall Bathroom Vanity Mirror Instruction Manual
- October 30, 2023
- HOMLUX
Table of Contents
HOMLUX 2E08004AEE Small Round Steel Framed Classic Wall Bathroom Vanity
Mirror
Product Information
The Mirror is a reflective surface that is used to view oneself. It is designed for indoor use and comes in different sizes to fit your desired height. The mirror is made of high-quality glass that ensures a clear reflection.
Product Usage Instructions
- Choose your desired height for the mirror and place it in the desired location.
- Assemble the mirror by following these instructions:
- Take the mirror out of its packaging.
- Attach the stand to the back of the mirror using the screws provided.
- Adjust the angle of the mirror if necessary.
- Once assembled, clean the mirror with a soft, non-abrasive cloth and glass cleaner.
- The mirror is now ready to use!
Note: Please handle the mirror with care to avoid breakage or damage.
Please read this instruction carefully before installation, and refer to it again during the installation to ensure a safe and correct installation of the mirror.
Installation tool
Product accessories
Installation Instruction
- Make certain the wall is solid, and use the flexible ruler to measure the center distance between two hardy holes.
- Use the flexible ruler to measure the center distance between two hardy holes on the wall and mark them out with a pencil.
- Choose the churn drill with a 6mm drill to make two holes at the marked places, and use a ceramic drill if the wall surface is made of ceramic tiles.
- Use the hammer to strike the expansion rubber plug-in accessory bag into the holes on the wall and then use the screwdriver to tighten the screws into the holes. The screw tightening is 15 mm higher than the surface of wall to hang the mirror hook.
Step 1
Measure the distance between the two hooks of the mirror.
Step 2
According to the distance from A, choose a suitable height and drill two 6mm
holes in the wall.
Step 3
Drive the expansion plug into the hole in the wall. then put a screw into the
expansion plug, and keep the screw 15mm away from the wall to hang the mirror.
Step 4
Hang the mirror on the wall.
Safety Instructions
- Try to avoid strong acid and alkali objects around the working environment.
- Please do not use corrosive abrasives, cleaners, or chemicals to clean your mirror.
- Storage is to avoid a humid environment.
- Avoid mechanical vibration and shock when transporting or transferring.
- Mirrors are fragile. Handle them with care. Do not stack them too high when they are stacked.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>