HOMLUX A50E004797 LED Wall Mounted Mirror User Manual
- October 30, 2023
- HOMLUX
Table of Contents
HOMLUX A50E004797 LED Wall Mounted Mirror
Product Information
The LED Wall-mounted Mirror is a modern illuminated round mirror designed by HOM LUX. The mirror features an anti-fog and memory function and comes with a touch sensor for easy control of light color and dimming. The mirror is made of copper-free silvered glass and an aluminum frame, with a 5mm thickness. It is IP44 rated, suitable for bathroom and makeup room use, and comes with ETL, CE, and ROHS certifications. The mirror can be installed on the wall and comes with a 3.6-4.3 foot long power cable and a U.S 3-pin plug for easy connection to a wall socket.
Product Usage Instructions
Before installation, please read the instruction manual carefully and refer to it again during installation to ensure a safe and correct installation of the mirror. Please note that installation should be made by a qualified/registered electrician, and not attempted by yourself. The mirror is suitable for zone 2 and external zone, not zone 0 or zone 1, and is not suitable for installation in saunas, steam rooms or shower cubicles.
Electrical Safety Instructions
Installation should be made by a qualified/registered electrician. Do not
attempt to install it by yourself, as HOM LUX will not be responsible for any
damage caused during installation.
Cleaning Instructions
When cleaning the mirror, switch off the power first. Do not use abrasives or
solvents when cleaning. Do not let water get in the mirror or submerge the
mirror in water. Wipe off all water spillages as soon as possible via a soft,
damp cloth.
Operation Instructions
To turn the light on, press the power button. Press the power button again to
change the light to white light. Press the power button a third time to change
the light to warm white light. Press the power button a fourth time to turn
the light off.
Dimming Instructions
To dim the light, press and hold the power button. The brightness of the light
will change accordingly.
Fog-free Instruction
For mirrors with an anti-fog function, press the defogging button after
turning on the power to activate the function.
Installation Instructions
Tools required for installation include a ruler, spirit level, electrical
drill, screwdriver, hammer, 3 screws and white nylon screw type plug, and 4
spacers. Follow the steps below for installation:
- Stick spacers on mirror backside to keep the mirror flat, and measure the distance of A (two hooks center distance).
- Mark two dots on the wall with the length of A/B then drill holes into those marks.
- Place the white nylon plugs into the holes in the wall then screw the screws into the plug.
- Hang the mirror on the wall.
Wire Connection
The product comes with a 3.6-4.3 foot long power cable and U.S 3-pin plug for
easy connection to a wall socket.
Statement
Please read this instruction carefully before installation, and refer to it
again during the installation to ensure a safe and correct installation of the
mirror.
Compliance
All the electrical components used in this product are ETL LISTED. This
product passed ETL certification.
Electrical Safety Instructions
- INSTALLATION should be made by a qualified/registered electrician. DO NOT attempt to install it by yourself, as HOMLUX will not be responsible for any damage caused during installation.
- According to IEEE regulations, this product is suitable for zone 2 and external zone, not zone 0 or zone 1. It is also not suitable for installation in saunas, steam rooms or shower cubicles.
- This product is only suitable for permanent installation, please do not plug in the power strip.
- Please make sure to keep the electrical supply off during installation and maintenance. It is recommended to pull out the fuse or switch off the circuit breaker before installation to disconnect the necessary circuits.
- HOMLUX LED mirror adopts three-pin plug, power leads must be connected to the ground wire.
- DO NOT put hard and sharp materials directly against the mirror surface during operation, otherwise, it may result in current leakage and even personal injury accident.
- Never forget to turn off the power supply in storm days, otherwise, electric components of the product could be damaged.
- DO NOT switch off the power supply directly during normal operation, otherwise, electric elements of the product may be easily damaged.
- Please turn off the power supply if the product is not used for a long time.
- DO NOT remove protective film or corner protectors until the mirror is completely installed.
- PLEASE KEEP THIS MANUAL BOOK FOR FUTURE REFERENCE.
Wiring
HOMLUX supplies an about 3.6-4.3ft long power cable and U.S 3-pin plug for easy connection with a wall socket. This product can connect the cord to the wall and be controlled by a wall switch.
Cleaning
- When the mirror has to be cleaned, please switch off the power first.
- DO NOT use abrasives or solvents when cleaning.
- DO NOT let water get in the mirror and submerge the mirror in water.
- Wipe off all water spillages as soon as possible via a soft, damp cloth.
Specification
| Product Name: | LED LIGHTED MIRROR | Certificates: | ETL, CE, ROHS |
|---|---|---|---|
| Brand: | HOMLUX | Input Voltage: | 110v |
| Design Style: | Modern | Power: | As specified on product label |
| Feature: | Illuminated | Lumen: | 2500-3000lm |
| Mirror Shape: | Round | Input Frequency: | 60Hz |
| Function: | Anti-fog, memory function | Color Temperature: | 3000k-6000k optional |
| Installation: | Wall mounted | IP Rating: | IP44 |
| Glass Thickness: | 5mm | Dimming Function: | Yes |
| Light Color | Warm/White/Warm white changeable | Hanging Way: | Horizontal |
| Touch Sensor | Yes | Warranty: | 1year |
| Material: | Copper-free silvered glass |
+ Aluminum frame
| Application:| Bathroom, makeup room
Operation Instructions
Light on/off
- Power on, then press to turn on, that light will be warm light.
- Second time you press the light will change to white light.
- Third time you press the light will change to warm white light.
- Press a fourth time to turn light off.
Dimming instruction
Power on, then press to turn on. Hold down and the brightness will change accordingly.
Fog-free instruction
( For the led mirror with anti-fog function)
Power on, press , and the mirror can be defogging.
Installation
Step 1
Stick spacers on mirror backside to keep the mirror flat, and measure the
distance of A(two hooks center distance).
Step 2
Mark two dots on the wall with the length of A/B then drill holes into those
marks.
Step 3
Place the white nylon plugs into the holes in the wall then screw the screws
into the plug.
Step 4
Hang the mirror to wall.
About the wire connection
There are two ways to connect the circuit for the mirror.
- Connection way 1: Plug the 3-pin plug in the socket on the wall.
- Connection way 2: Connect the mirror wire with wall switch wire via a connector.
CARE AND MAINTENANCE
- Please wipe the mirror with a soft dry cloth or cotton to avoid scratching the mirror.
- Please avoid harsh, corrosive, and abrasive cleaners.
- Keep dry and avoid damp environments.
- We provide a 1-year warranty (Excludes artificial damage and normal wear and tear). 1 year warranty period shall not be extended or renewed by the repair or replacement of the product/parts.
If you have any problems, please feel free to contact us. We enjoy hearing from our customers!
Thanks for choosing HOMLUX.
Web: www.homluxproducts.com.
Tel: (800) 209-3199
Any query please feel free to email service team:
[email protected].
Scan the QR code to watch the video of installation.
Documents / Resources
|
HOMLUX A50E004797 LED Wall Mounted
Mirror
[pdf] User Manual
A50E004797, 810092574576, 0810092574576, 1007980646, A50E004797 LED Wall
Mounted Mirror, A50E004797 Wall Mounted Mirror, LED Wall Mounted Mirror, Wall
Mounted Mirror, LED Mirror, Mirror
---|---