HOMLUX Round LED Bathroom Mirror Instruction Manual
- June 4, 2024
- HOMLUX
Table of Contents
Round LED Bathroom Mirror
Instruction Manual
Instructions & Installation
Statement
Please read this instruction carefully before installation, and refer to it
again during the installation to ensure a safe and correct installation of the
mirror.
Compliance
All the electrical components used in this product are ETL LISTED. This
product passed ETL certification.
Electrical Safety Instructions
INSTALLATION should be made by a qualified/registered electrician. DO NOT
attempt to install it by yourself, as HOMLUX will not be responsible for any
damage caused during installation.
According to IEEE regulations, this product is suitable for zone 2 and
external zone, not zone O or zone 1. It is also not suitable for installation
in saunas, steam rooms, or shower cubicles.
This product is only suitable for permanent installation, please do not plug
in the power strip.
Please make sure to keep the electrical supply off during installation and
maintenance. It is recommended to pull out the fuse or switch off the circuit
breaker before installation to disconnect the necessary circuits.
HOMLUX LED mirror adopts three-pin plug and power leads must be connected to
the ground wire.
DO NOT put hard and sharp materials directly against the mirror surface during
operation, otherwise, it may result in current leakage and even personal
injury accident. stormy
Never forget to turn off the power supply in days, otherwise, the electrical
components of the product could be damaged.
DO NOT switch off the power supply directly during normal operation,
otherwise, electric elements of the product may be easily damaged.
Please turn off the power supply if the product is not used for a long time.
DO NOT remove protective film or corner protectors until the mirror is
completely installed.
PLEASE KEEP THIS MANUAL BOOK FOR FUTURE REFERENCE.
Wiring
HOMLUX supplies an about ft long power cable and U.S 3-pin plug for easy
connection with a wall socket.
Optional to cut the plug directly and connect to electrical wiring if using
the wall switch.
Cleaning
When the mirror has to be cleaned, please switch off the power first.
DO NOT use abrasives or solvents when cleaning.
DO NOT let water get in the mirror and submerge the mirror in water.
Wipe off all water spillages as soon as possible via a soft, damp cloth.
Specification
Product Name: | LED LIGHTED MIRROR | Certificates: | ETL, CE, ROHS |
---|---|---|---|
Brand: | HOMLUX | Input Voltage: | 110V |
Design Style: | Modern | Power: | As specified on the product label |
Feature: | Illuminated | Lumen/m: | 2500-3000Im |
Mirror Shape: | Round | Input Frequency: | 60Hz |
Function: | Anti-fog, memory function | Color Temperature: | 3000K-6000K optional |
or 6000K-6500K
Installation:| Wall mounted| IP Rating:| IP44
Glass Thickness:| 5mm| Dimming Function:| Yes
Light Color:| Warm/White/Warm white changeable or White| Hanging Way:|
Horizontal
Touch Sensor:| Yes| Connection Way:| Plug-in or Hardwired
Material:| Copper-free silvered glass + Aluminum frame| Application:|
Bathroom, makeup room
Operation Instructions —3000K-6000K
Light on/off
Power on, then press to turn the light on, the light is the warm light.
Then the second time press the light changed to white light. ,
The third time press the light change to warm white light. ,
Then press again to turn the light on.
Dimming instruction
Power on, press to turn the light on, then press and hold ,the brightness will change accordingly.
Fog-free instruction
( For the led mirror with anti-fog function)
Power on, press , the mirror can be defogging.
Installation
Parts List
Operation Instructions —6000K-6500K
Light on/ off
Power on, then press to turn the light on, the light is white light.
Then press again to turn the light off.
Dimming instruction
Press and hold Power on, press to turn the light on, then the brightness will change accordingly.
Fog-free instruction
( For the led mirror with anti-fog function)
Power on, press , and the mirror can be defogging.
Installation
Pasts List
Step 1 (You will receive one of the following two aluminum strips, both
ready to install)
Measure the distance between two holes on the aluminum strip.
Step 2
According to the distance from A, choose a suitable height and punch two holes
in the wall.
Step 3
Drive the expansion plug into the hole on the wall and then put the screw into
the expansion plug to fix the aluminum strip on the wall.
Step4
Hang the mirror on the wall
About the wire connection
There are two ways to connect the circuit for the mirror.
Connection way 1 : Plug the 3-pin plug in the socket on the wall.
Connection way 2: Cut of the plug, and connect the mirror’s wire to the wall switch’s wire. (Recommend installation by a professional electrician)
Thanks for choosing HOMLUX
Web: www.homluxproducts.com
Any queries, please feel free to email our service team:
help@homluxproducts.com
Scan the QR code to watch the video of the installation.
AFTER-SALES
SERVICE CARD
We sincerely thank you for trusting our service and our products, and may this product add enrichment to your home. We guarantee that the product has undergone strict quality inspection and meticulous packaging. If you encounter any issue regarding either shipping or the product, please feel free to contact us at any time. We’d be more than happy to serve you wholeheartedly. Yours Sincerely
- Please clean with a damp cloth and wipe dry.
- Please avoid harsh, corrosive and abrasive cleaners.
- Keep dry and avoid damp environments.
Customer Service: ( 800) 209- 3199 (MON -FRI 9:00am-5:00pm
Eastern Time) or help@homluxproducts.com
Address: 100 Pottery Road, Commerce, GA 30529
If you have any questions or concerns, please feel free to contact us.
We’re committed to providing our customers with quality service.
LED Wall-Mounted Mirror
Documents / Resources
|
HOMLUX Round LED Bathroom
Mirror
[pdf] Instruction Manual
Round LED Bathroom Mirror, LED Bathroom Mirror, Bathroom Mirror, Mirror
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>