TESLA TSL-CAM-BULLET8S Smart Camera Outdoor (2022) User Manual
- June 3, 2024
- Tesla
Table of Contents
TESLA TSL-CAM-BULLET8S Smart Camera Outdoor (2022) User Manual
WHAT`S IN THE BOX
Please consult this checklist for all parts.
- Smart Camera Outdoor
- Power adapter
- Screw package
- User manual
- Screwdriver
INSTALL
- Push the bracket in the direction shown to take apart.
- Install the bracket to the wall with screws. Put the UP logo up.
- Insert the bracket upward and then push the bracket in the opposite direction of step 1, to lock the bracket with the camera. (Optional) You can adjust the camera horizontally or vertically by manual. It is recommended to adjust camera horizontally between 0 to 150 degrees, and vertically between 15 to 20 degrees. You can also rotate the bracket from 0 to 360 degrees
CONNECT
Download
Tesla Smart is available for both iOS and Android OS. Search the name ,Tesla
Smart` in App Store or Android Market, or scan the QR-Code to download the
App.
SET UP ROUTER
The router supports the 2.4GHz WiFi (doesn`t support the 5GHz), and is
connected to the WiFi network. Please set the parameters of the router before
connecting the WiFi network, and record the SSID and password of your WiFi.
Please keep network available
REGISTRATION PROCESS
Step 1 Open the Tesla Smart App, click ,,Register”, read the ,,Privacy Policy”
and click ,,Agree” . Step 2 Input a legal and valid Mobile number or Email
address and click ,,Continue”. Input Verification Code, then log in the app.
QR CODE CONFIGURATION
- Open the Tesla Smart App, click ,,Create family”, and you can customize the Family name and related settings.
- Continue to click ,,Security & Sensor” >> ,,Smart Camera”, and then choose” Add Device” or ,,+”, ready to add camera.
- In ,,Add Device” this interface, continue to click ,,next step”, and then you should input your WiFi`s passwords. Note: 1) Camera only supports 2.4GHz WiFi network. 2) The number of bits in the ssid and passwords of the router should not exceed 24 digits.
- In this interface, you should scan the QR code in your phone with the camera, when the camera comes out ,,dong dong dong”. And you can complete the configuration about 30s.
- When connecting, you should make sure your router, mobile, and camera are as close as possible. When camera added successfully, click ,, ,, you could also DIY the camera`s name.
SETTINGS
In ,,Smart Camera” interface, click ,, ,,you can set the camera common
functions.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device again by the App.
Q: Why doesn`t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been opened.
FUNCTIONS
Video flip Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send you push
notifications and app alerts.
Record
Record every moment using high capacity SD card storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
Full color vision
With white light, the captured pictures and videos of motion detection are
colourful which can provide you a better vision.
TECHNICAL SPECIFICATION
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorisation and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimise impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorised service centre or local authorities.
EU DECLARATION OF CONFORMITY
Hereby, Tesla Global Limited declares that the radio equipment type TSL-CAM- BULLET8S is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: tsl.sh/doc
Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n Frequency band: 2.412 – 2.472 GHz Max. radio-frequency power (EIRP): < 20 dBm
Manufacturer Tesla Global Limited Far East Consortium Building 121 Des Voeux
Road Central
Hong Kong www.teslasmart.com
TESLA SMART CAMERA OUTDOOR
Manufacturer Tesla Global Limited Far East Consortium Building 121 Des Voeux
Road Central
Hong Kong www.teslasmart.com