Milwaukee M18 ONERSAL LED Remote Stand Light Instruction Manual
- June 3, 2024
- Milwaukee
Table of Contents
Nothing but HEAVY DUTY
M18 ONERSAL LED Remote Stand Light
Instruction Manual
M18 ONERSAL
Original instructions
M18 ONERSAL LED Remote Stand Light
Picture section with operating description and functional
description
Remove the battery pack before starting any work on the
machine.
2 Batterie packs double the lighting time. If one battery pack is empty, the
device automatically switches to the other battery pack.
TECHNICAL DATA
BATTERY-LAMP……………………. M18 ONERSAL
Battery voltage……………………………………….18 V
Rated power input ………………………………46 W
Lighting time with two fully charged batteries (9.0 Ah)
Mode 3 high level ………………………………………7h
Mode 2 med level ………………………………………12.5h
Mode 1 low level …………………………………26h
Luminous flux
High level ……………………………………….5400 lm
Med level …………………………………………3100 lm
Low level …………………………………………..1600 lm
Colour rendering index (CRI)……………………70
Colour temperature……………………………………….4000 k
Frequency band(s) of Bluetooth ……………………..2402-2480 MHZ
Radio-frequency power ………………………………….1.8 dBm
Bluetooth version ……………………………….. 4.0BT signal mode
Weight without battery ……………………………………….8.7 Kg
Weight according EPTA-Procedure 01/2014 (2.0 Ah) …………………….9.3 Kg
Weight according EPTA-Procedure 01/2014 (5.0 Ah) …………10.1 Kg
Weight according EPTA-Procedure 01/2014 (9.0 Ah) …………10.9 Kg
Protection class …………………………………………………………….IP67
WARNING Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fi re and/or
serious injury. Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Remove the battery pack before starting any work on the appliance.
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors offer to retrieve old
batteries to protect our environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Use only compatible Milwaukee chargers from the same battery platform for
charging battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or extreme
temperatures. In case of contact with battery acid wash it off immediately with
soap and water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
Warning: Do not direct the light beam at persons or animals and do not
stare into the light beam yourself (not even from a distance). Staring into
the light beam may result in serious injury or vision loss.
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
WARNING This device contains a lithium button/coin cell battery. A new or
used battery can cause severe internal burns and lead to death in as little as
2 hours if swal lowed or enters the body. Always secure the battery cover. If
it does not close securely, stop using the device, remove the batteries, and
keep it away from children. If you think batteries may have been swallowed or
entered the body, seek immediate medical attention.
Caution – this product is provided with cooling openings in the bottom
enclosure. Only install this luminaire on a surface that will not allow
accumulation of water into the housing. Keep the product away from
puddles,etc.
Warning! To reduce the risk of fi re, personal injury, and product damage
due to a short circuit, never immerse your tool, battery pack or charger in
fluid or allow a fluid to flow inside them. Corrosive or conductive fl uids, such
as seawater, certain industrial chemicals, and bleach or bleach containing
products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The battery lamp can be used as lighting independently of a mains power
supply.
Do not use this product in any other way as stated for normal use.
EC-DECLARATION OF CONFORMITY
Hereby, Techtronic Industries GmbH declares that the radio equipment type M18
ONERSAL is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://services.milwaukeetool.eu
GB- DECLARATION OF CONFORMITY
Hereby, Techtronic Industries GmbH declares that the radio equipment type M18
ONERSAL is in compliance with Directive S.I. 2017/1206 (as amended). The full
text of the GB declaration of conformity is available at the following
internet address:
http://services.milwaukeetool.eu
ONE-KEY™
To learn more about the ONE-KEY functionality for this tool, please reference
the Quick Start guide included with this product or go to
www.milwaukeetool.com/one-key. To download the ONE-KEY app, visit the App
Store or Google Play from your smart device.
Also, when the product experiences ESD, the Bluetooth communication will be
disconnected. It needs to be reset manually to recover.
ONE-KEY™ Indicator
Solid Blue| Wireless mode is active and ready to be confi gured via the ONE-
KEY™ app.
---|---
Blinking Blue| Tool is actively communicating with the ONE-KEY™ app.
Blinking Red| Tool is in security lockout and can be unlocked by the owner via
the ONEKEY™ app.
BATTERIES
Battery packs which have not been used for some time should be recharged
before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged, after
used.
To obtain the longest possible battery life remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from
moisture
Store the battery packs in a 30% – 50% charged condition
Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with local,
national and international provisions and regulations.
- The user can transport the batteries by road without further requirements.
- Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.
When transporting batteries:
- Ensure that battery contact terminals are protected and insulated to prevent short circuit.
- Ensure that battery pack is secured against movement within packaging.
- Do not transport batteries that are cracked or leak. Check with forwarding company for further advice
MAINTENANCE
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
Use only Milwaukee accessories and spare parts. Should components need to be
replaced which have not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
machine type printed as well as the six-digit No. on the label and order the
drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
| **** | CAUTION! WARNING! DANGER! |
|---|---|
| Please read the instructions carefully before starting the machine. | |
| Remove the battery pack before starting any work on the machine. | |
| Do not stare at the operating light source. | |
| Do not swallow the coin cell battery! | |
| **** | Class III electrical protection. |
| Do not dispose of waste batteries, waste electrical and electronic |
equipment as unsorted municipal waste. Waste batteries and waste electrical
and electronic equipment must be collected separately.
Waste batteries, waste accumulators and light sources have to be removed from
equipment. Check with your local authority or retailer for recycling advice
and collection point.
According to local regulations retailers may have an obligation to take back
waste batteries and Waste electrical and electronic equipment free of charge.
Your contribution to re-use and recycling of waste batteries and waste
electrical and electronic equipment helps to reduce the demand of raw
materials.
Waste batteries, in particular containing lithium and waste Electrical and
electronic equipment contain valuable, recyclable materials, which can
adversely impact the environment and the human health, if not disposed of in
an environmentally compatible manner. Delete personal data from waste
equipment, if any.
****| European Conformity Mark
| British Confomity Mark
| Ukraine Conformity Mark
| EurAsian Conformity Mark
Copyright 2022
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden
Germany +49 (0) 7195-12-0
www.milwaukeetool.eu
Techtronic Industries (UK) Ltd
Parkway Marlow, SL7 1YL UK (04.22)
4931 4148 56
References
- Track Tools with ONE-KEY™: Free Inventory App by Milwaukee®
- Milwaukee Tool Europe | Cordless Power Tools, Outdoor Tools, Hand Tools, PPE, Work wear. Storage and Accessories. | Milwaukee Tools Europe
- Home - Identity Digital
- Milwaukee Services
- Milwaukee® Tool Official Site | Nothing but HEAVY DUTY®
- Track Tools with ONE-KEY™: Free Inventory App by Milwaukee®
- Milwaukee Tool Europe | Cordless Power Tools, Outdoor Tools, Hand Tools, PPE, Work wear. Storage and Accessories. | Milwaukee Tools Europe
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>