milwaukee M18 CDEX FUEL Cordless Dust Extractor Instruction Manual
- October 30, 2023
- Milwaukee
Table of Contents
M18 CDEX FUEL Cordless Dust Extractor
Instruction Manual
M18 CDEX FUEL Cordless Dust Extractor
Please read and save these instructions!
| 
---|---
| 
| 
TECHNICAL DATA
| Dust extractor | M18 CDEX |
|---|---|
| Production code | 4524 69 04… … 000001-999999 |
| Stroke max. | 100 mm |
| Drilling capacity max. | 16 mm |
| Drill bit length max. | 160 mm |
| Drilling depth max. | 85 mm |
| Weight | 1,6 kg |
WARNING! Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or
serious injury. Save all warnings and instructions for future reference.
It is also essential that you read and follow the user manual for the
hammer drill you use.
HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of control can
cause personal injury.
Hold power tool by insulated gripping surfaces, when performing an
operation where the cutting accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
Additional Safety and Working Instructions
Do not use the dust extractor for drilling work in wood, steel or plastic.
Do not use machines on any material containing asbestos.
The following materials should not be picked up by the vacuum cleaner
- hazardous dust
- flammable, explosive dust (e.g. magnesium or aluminum dust, etc.)
Despite using the dust extractor, a small amount of dust may still escape.
B The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a suitable dust
protection mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner.
Only use the appliance if it is in perfect condition. Never use the dust
extractor without a filter, or if the filter is damaged.
SPECIFIED CONDITIONS OF USE
The dust extractor is designed for the extraction of dust in drilling
applications with hammer drills in stone and concrete.
The dust extractor may only be used as an accessory for the following
machines:
MAINTENANCE
The ventilation slots of the machine must be kept clear at all times. Use only
Milwaukee accessories and Milwaukee spare parts. Should components need to be
replaced which have not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
Article No. as well as the machine type printed on the label and order the
drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-StraßeÅ10, 71364ÅWinnenden, Germany.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described under
“Technical Data” fulfills all the relevant provisions of the directives
EN 60745-1:2009 + A11:2010
EN 60745-2-6:2010
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 63000:2018
Winnenden, 2021-02-17
Alexander Krug / Managing Director
Authorized to compile the technical file
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
GB-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that the product
described under „Technical Data“ fulfills all the relevant provisions of the
following designated standards:
BS EN 60745-1:2009 + A11:2010
BS EN 60745-2-6:2010
BS EN 55014-1:2017+A11:2020
BS EN 55014-2:2015
BS EN IEC 63000:2018
Winnenden, 2021-02-17
Alexander Krug / Managing Director
Authorized to compile the technical file
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
SYMBOLS
| Please read the instructions carefully before starting the machine.
---|---
| CAUTION! WARNING! DANGER!
| Remove the battery pack before starting any work on the appliance.
| Always wear goggles when using the machine.
| Wear a suitable dust protection mask.
| Do not dispose of electric tools together with household waste material.
Electric tools and electronic equipment that have reached the end of their
life must be collected separately and returned to an environmentally
compatible recycling facility. Check with your local authority or retailer for
recycling advice and collection point.
| European Conformity Mark
| British Conformity Mark
| Ukraine Conformity Mark
| EurAsian Conformity Mark
Copyright
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
+49 )0( 7195-12-0
www.milwaukeetool.eu
2021
Techtronic Industries )UK( Ltd
Fieldhouse Lane
Marlow Bucks SL7 1HZ
UK