Keyboards Wireless Keyboard and Mouse Combo User Manual

Keyboards Wireless Keyboard and Mouse Combo

packing list

• 1* Keyboard
• 1* Mouse
• 1* User manual
• 1* USB To Type-C charging cable

Thank you very much for using this product, please read the manual carefully before use.

Product display

• After the keyboard is powered on, the green light will turn on for 3S and then turn off
• Red light flashes when the battery is too low;red light when charging, green light when fully charged. Flashes below 3.3V until shutdown.
• Turn on the upper and lower case button, the green light is on; press it again to turn it off.
• Turn on the upper and lower case button, the green light is on; press it again to turn off
• Turn on the FN lock and light green (the keyboard will turn off after hibernation, and continue to light green after reawakening)

Keyboard and mouse pairing and connection steps

1. When you get a try of the product, the product is already paired.
2. Turn on the power switch of the keyboard and mouse, insert the 2.4G receiver into the USB port of the computer, and you can use it directly.

Function key description

Note: The blue characters and the corresponding functions of the F1-F12 series can be realized by pressing th and the corresponding keys together.

Product charging
When the power of the keyboard or mouse is too low, the red indicator light on the product will start to flash until it is completely turned off. Please plug in the charging cable in time to ensure normal use. When the power supply is too low: the transmission of the keyboard and mouse will be delayed, stuck, and the connection will be unstable.

Keyboard Specifications

Note：
If the USB receiver is plugged into the computer, your keyboard or mouse can be turned on normally, but if there is no response, please try pairing yourself：

1. Turn on the keyboard, press ESC+Q, the light flashes quickly to enter the pairing state, immediately plug the receiver into the computer, Move the keyboard close to the receiver. The connection is successful, the light flashes slowly 3 times and then goes out. The connection is unsuccessful, the light flashes quickly and will also go out after 10 seconds, you need to unplug the receiver and repair it according to the above steps.
2. After the keyboard is successfully connected, first unplug the receiver and prepare to pair it with the mouse.
3. Press and hold the middle button and right button of the mouse at the same time, do not release, then turn on the power, and release the buttons after two seconds,The light flashes quickly and the mouse enters the pairing state; immediately plug the receiver into the computer and move the mouse close to the receiver.After the connection is successful, the light flashes slowly 3 times and then goes out. If the connection is unsuccessful, the light will go out after flashing quickly for 10 seconds. You need to unplug the receiver and re-pair according to the above steps.
4. The pairing sequence of the keyboard, mouse and receiver does not affect the pairing code; if only the keyboard or mouse has no function, just follow the steps to pair it separately.

About after-sales problems

1. 12 Months Warranty
2. If you have any problem, please feel free to contact us. Manufacturer Email: Sales@sz-deying.com

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

References

• 德英-中国家具网 | 中国家具 住宅家具知名品牌排行榜 deying.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>