Keyboards CLPC268ABUS Wired Keyboard User Manual
- June 3, 2024
- Keyboards
Table of Contents
Keyboards CLPC268ABUS Wired Keyboard
Package Content
Instructions
Take out the keyboard. Plug the USB into the port of the computer. Use it after its drive is automatically installed on computer.
Functions
Backlight Function
-
Switch Modes
A: Press button to turn on/ turn off backlight.
B: Press
buttons to switch between steady on mode and
breathing mode. The default mode is steady on mode. -
Adjust Brightness
Steady on Mode: Press to adjust brightness.
Switch Keys Function
Press +W button to interchange “W” “S0 “A” “D” keys with “ ↑ ” “ ↓ ” “ ← ” “ → “keys.
Lock Function
Press +WIN keys to turn on/ turn off WIN function.
Compatibility
Works with Windows 95/98/XP/2000/MENISTA/7/8/10, Mac (multimedia keys are unavailable on Mac)
Multimedia Shortcuts
Fn+F1
| Fn+F2| Fn+F3| Fn+F4| Fn+F5|
Fn+F6
---|---|---|---|---|---
Player
| Volume-| Volume+| Mute| Stop| Previous Track
FN+F7| FN+F8| Fn+F9| Fn+F10| Fn+F11|
Fn+F12
Pause/Play
| Next Track| Email| Website| Lock Keyboard (re-press to unlock)|
Calculator
Correct Disposal Of This Product
(Waste Electrical & Electronic Equipment )
This Marking shown on the product or its literature, indicate that
– it should not be disposed with other household wastes at the end of its
working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
user should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this
item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contact. This product should not be mixed with
other commercial wastes for disposal.
FCC Statement
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.