JOYROOM JR-ML05 RGB Wireless Speaker User Manual
- June 3, 2024
- Joyroom
Table of Contents
JR-ML05 RGB Wireless Speaker
User Manual
Product diagram
- Volume down/previous song
- Volume up/next song
- Pause/play
- Power button
- Reset hole
- Type-C charging port
- Indicator light
- TF card slot
Packing list
Parameters
Name: RGB Wireless Speaker
Model: JR-ML05
BT version: V5.3
Audio decoding: SBC
Supported protocols: HSP, HFP, A2DP, AVRCP
BT range: 10m
Frequency response range: 20Hz-20KHz
Speaker: φ57mm
Power: 8W
Music format: MP3
TF card capacity: 32G (max)
Music time: about 3h (80% volume)
Standby time (connected): about 15h
Battery capacity: 1500mAh
Charging time: about 3.5h
Charging port: Type-C
Charging input: 5V 1A
Size: 137*100mm
Material: ABS+PC+Speaker mesh
Net weight: 490g
Pairing operation
- Press and hold the power button for 1s, the speaker will make a “bom” sound, and the blue RGB light will keep on for 2s, which means the speaker is turned on; The speaker makes a “ding-dong” sound, the blue RGB light flashes quickly in breathing mode, which means the speaker is ready for pairing.
- Turn the phone’s BT function on and search for the BT device “JR-ML05”; Connect the phone with it, and then you are free to listen to music or make calls via the speaker.
Note:
Please connect the speaker manually for the first time, after that it will
connect to the last connected device automatically. (iP & Android devices
connecting in the same way)
Operation instructions
Speaker interconnection mode
- When two speakers are in turned on but unpaired condition, triple-click the mode switch button of either speaker, they will enter speaker interconnecting mode with a “doo-doo” sound. And another “doo” sound after that indicates that the speaker interconnection is succeeded.
- Under interconnection mode, triple-click the mode switch button of either speaker to quit that mode.
Speaker interconnection mode: Triple-click the mode switch button of either speaker
BT mode / TF card mode / FM mode switching
Press and hold the pause/play button for 1s to switch between BT mode, TF card
mode and FM mode
Note: You must insert a TF card to switch mode. When the speaker is
turned on, it will enter BT mode automatically.
Mode
switching: Press and hold the mode switch button for 1s
FM tuning
- Insert the charging cable into the Type-C charging port of the speaker ( Note: there is no need to connect power supply, the charging cable serves as an external antenna);
- Press and hold the pause/play button for 1 second to switch to FM mode;
- Double-click the pause/play button to tune in a station automatically. After that, you can long press the “+” and “-” buttons to switch stations.
Restore factory settings
In turned on condition, triple-click the volume up (+) button quickly
Restore factory settings: triple-click the volume up (+) button quickly
Indicator light instructions
| Turn on | Blue RGB light keeps on for 2s |
|---|---|
| Ready for pairing | Blue RGB light flashes in breathing mode |
| Light mode 1 | Blue RGB light keeps on |
| Light mode 2 | RGB light flashes slowly and changes color in cycles |
| Light mode 3 | RGB light flashes quickly and changes color in cycles with the |
rhythm of music
Light mode 4| Yellow RGB light keeps on
Charging indicator light| The white indicator light keeps on. When fully
charged, it will turn off.
Turn on| “bom” sound
---|---
Connected| “doo-der” sound
Disconnected| “der” sound
Turn off| “hum-” sound
Max volume| “der-der” sound
Call reminder| “doo-doo-doo” sound
Low battery warning| “doo” sound every 60 s until powered off at low battery
FAQ
Q: Why can’t the speaker be turned on?****
– A. Please check whether the speaker is still with power. If not, please
charge it for more than half an hour before turning it on.
– Please long press the power button, if you press it too shortly or at a
wrong position, the speaker may fail to turn on.
Q: Failure to connect with the speaker?****
– A: Check whether the speaker is powered on normally and ready for pairing.
(Please check it by the indicator light or prompt tone.)
– Check whether the speaker is connected to another device. If so, please
disconnect with it and make a re-connection again.
– Turn off the phone’s BT function and the speaker, then turn them on again
for re connection.
– If the speaker still cannot be connected after above operations, you can
restore it to factory settings.
Q: Why does jamming/discontinuity occur when listening to songs?****
– A: The speaker’ signal may be disconnected because of the long distance
between the speaker and connected device. Please keep them within 10m
distance.
– The speaker’ signal may be interfered when being used in an environment with
strong interference. Please make sure there’s no large shield, metal partition
or large interference source around you.
– Please make sure the phone’s signal and network are in good condition, in
case of poor signal or network cache problems, jamming or discontinuity will
happen to your speaker.
Q: Why is the sound of the speaker too low or mute?****
– A: Please check whether the playback channel of the mobile phone is turned
on normally. If not, turn on your phone’s BT function, click the icon on the
right side of connected device and make sure the media channel and call
channel are turned on properly.
– Open the “Settings” interface of your phone and check if there is a maximum
volume limit.
– The volume up/down control of the speaker and the mobile phone may be
operated separately due to different settings of mobile phones (such as
Android). Please adjust the volume of both the mobile phone and the speaker
according to the settings of the mobile phone.
Q: Failure to work when the speaker is connected to the computer?****
– A: Please turn on the output channel of the computer and set the speaker
output mode as default mode.
– The win 7 system may have incompatibility problems, while the systems above
win 10 are better compatible with the speaker.
– Or it may be caused by the wireless adapter if connecting a desktop computer
with the speaker by it.
Q: Why can’t the speaker be charged?****
– A: The charging port and cable may not be connected properly, please pull
the cable out and plug it in again repeatedly to make sure it is well
inserted.
– Please use adapters that conform to national/regional safety standards
together with the included charging cable to charge it. Avoid using unqualified
or unguaranteed chargers/cables which may damage the speaker.
Safety Criterion
- Please follow the instructions, do not disassemble the product or refit it for any reason, otherwise it may break down or burn down.
- Do not immerse it in any liquid or wash it with water.
- Please use adapters that conform to national/regional safety standards together with the included charging cable to charge the speaker, otherwise the speaker’s battery may be damaged or cause safety problems.
- Please use and store it in normal temperatures; too low or too high temperature (below 0 ℃ or above 45 ℃) is not permitted.
- Do not block the openings of the speaker, such as charging port and indicator light, etc.
- Do not use it with loud volume or in a long time to avoid dizziness or hearing damage.
- Do not use it under thunderstorm which may lead to abnormal performance and signal interruption.
Warranty Card
| User Name: | User Tel: |
|---|
User address (with postcode):
Dealer Name:| Purchase date:
Dealer Tel:| Invoice No.:
Dealer Address (with postcode):
Warranty
A. If there is performance failure on this product and it’s not cause by human
error damage, we will provide 12-month free warranty service for consumers
from the date of purchase.
B. Warranty Exceptions:
- Human damage;
- Beyond the warranty period;
- Failure to provide valid purchase certificate;
- Product damage caused by failure to follow the use, maintain and preserve instructions;
- Product damage caused by dismantle it or repair the product without authorization, or immerse the product in water;
- Damage caused by other force majeure.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.