JOYROOM JR-MI01 Shower Phone Holder with Wireless Speaker User Manual

JOYROOM JR-MI01 Shower Phone Holder with Wireless Speaker

Product Information

Specifications

• Product Name: JR-MI01 Shower Phone Holder with Wireless Speaker
• Compatibility: Mainstream phones within 7 inches
• Features: Wireless Speaker, Phone Holder, Universal Compatibility

Product Usage Instructions

Installation Guide

1. Wipe clean dirt on the wall.
2. Paste the sticky pad onto the wall.
3. Align the phone holder with the sticky pad. Installation finished.
4. Attach the speaker & phone holder magnetically. (Note: tear off the protective film on the phone holder before use)

Operation Instructions
Attention: DO NOT immerse the phone holder completely in water. Keep the wall dry when installing the sticky pad, and leave it for 24h before hanging the phone holder for use.
Opening/Closing: PRESS with both hands to open/close it.

Pairing Operation

1. Turn on : Press and hold the multifunctional button for 2s to manually turn on the speaker.
2. Connected: When the ice blue light ring breathes quickly, it is ready for pairing. Turn on your phone’s Bluetooth function and search for the BT device “Joyroom Immerse MI01” to connect.
3. Turn off: Press and hold the multifunctional button for 5s to manually turn off the speaker. It will also turn off automatically if not connected for 10 minutes.

Music & Call Functions

• Music Function: Play/Pause, Previous track, Next track, Volume up, Volume down.
• Call Function: Answer/end call, Reject call, Redial last number.
• Voice Assistant: Activate/turn off voice assistant.
• Factory Reset: Restore factory settings.
• Interconnection: Enter/Exit TWS interconnection mode.

Indicator Instructions

• Turn on: Ice blue light ring keeps on for 3 seconds.
• Turn off: Ice blue light ring flashes twice.
• Ready for pairing: Ice blue light ring breathes quickly.
• Charging the speaker: Ice blue light ring keeps on during charging and turns off when fully charged.

Frequently Asked Questions (FAQ)

• Can the phone holder be completely immersed in water?
  No, DO NOT immerse the phone holder completely in water as it may damage the device.

• How do I pair the speaker with my phone?
  Press and hold the multifunctional button to turn on the speaker, ensure it is in pairing mode indicated by the flashing ice blue light ring, then connect via your phone’s Bluetooth settings.

• How do I activate voice assistant?
  In music or standby status, press and hold the multifunctional button for 1 second and release after hearing a sound to activate or turn off Siri or other voice assistants.

Installation Guide

1. Wipe clean dirt on the wall.
2. Paste the sticky pad onto the wall.
3. Align the phone holder with the sticky pad. Installation finished.

Operation Instructions

1. Supports 360° rotation.
2. Supports 120° angle adjustment.

3. PRESS” with both hands to open/close it.
4. 60° fixed open angle, easy to slide in/take out the phone.

Universal Compatibility
Widely compatible with mainstream phones within 7 inches.

5. Attach the speaker & phone holder magnetically.
   (Note: tear off the protective film on the phone holder before use)

Attention:

  * DO NOT immerse the phone holder completely in water.
  * Keep the wall dry when installing the sticky pad, and leave it for 24h before hanging the phone holder for use.

Product picture

1. Audio out
2. Light ring
3. Previous track
4. Volume-
5. Next track
6. Microphone
7. Lanyard hole
8. Volume+
9. Multifunctional button
10. Type-C charging port

Packing list

Basic parameters

• Name: Shower Phone Holder with Wireless Speaker
• Model: JR-MI01
• BT version: V5.4
• Audio decoding : SBC
• Supported protocols: HFP, A2DP, AVRCP
• Control mode: button control
• Interconnection: TWS interconnection
• Working frequency: 2402-2480MHz
• Max output power : 0dBm±2 (EIRP)
• BT range: ≥10m (barrier-free open environment)
• Frequency response range: 50Hz-18KHz
• Speaker: φ40mm+ passive radiator
• Rated output power : 3W
• Music time: about 60h (70% volume)
• Standby time (connected): about 120h
• Battery capacity: 1800mAh
• Charging time: about 3.5h
• Type-C charging input: 5V 1A
• Material: ABS+PC+silicone
• Water resistance: speaker IPX7; phone holder IPX4
• Net weight: speaker 194g; phone holder 215g
• Size: speaker 20049.532mm; phone holder 20011845.5mm

Pairing operation

1. Turn on
   Press and hold the multifunctional button for 2s to turn on the speaker manually

2. Connected

   • When the ice blue light ring breathes quickly, it means the speaker is ready for paring.
   • Turn the phone’s BT function on and search for the BT device “Joyroom Immerse MI01”, connect with it.

3. Turn off

   • Press and hold the multifunctional button for 5s to turn off the speaker manuall.

   • The speaker will turn off automatically if not connected for 10min.

Warranty Card

Warranty service instructions

• If there is performance failure on this product and it’s not caused by human error, we will provide a 24-month free warranty service for consumers from the date of purchase.
• Warranty exceptions:
  • Human damage;
  • Expired the warranty period;
  • Failure to provide valid purchase certificate;
  • Product damage caused by failure to follow the use, maintenance and care instructions;
  • Product damage caused by disassembling or repairing the product without authorization, or immersing the product in water;
  • Damage caused by force majeure.

Operation instructions

• Music function

  • Play/Pause :
    Click the multifunctional button to pause or play music

  • Previous track:
    Click the previous track button

  • Next track:
    Click the next track button

  • Volume up:
    Click or long press the volume+ button

  • Volume down:
    Click or long press the volume- button

• Call function

  • Answer/end call :
    Click the multifunctional button to answer or end a call

  • Reject call:
    Press and hold the multifunctional button for 2s

  • Redial last number:
    Double-click the multifunctional button under phone connected status

• Voice assistant
  Activate/turn off voice assistant:
  In music or standby status, press and hold the multifunctional button for 1s and then release after hearing a “doo” sound to activate or turn off Siri

• Factory reset
  Restore factory settings:
  In turned on status, press and hold the volume+ and volume- buttons simultaneously for 3s.

• Interconnection

  • Enter TWS interconnection mode:
    3-click the multifunctional button of both speakers simultaneously to enter TWS interconnection mode

  *  **Exit TWS interconnection mode:**  

3-click the multifunctional button of either speaker to exit TWS interconnection mode

Indicator instructions

fully charged, it will turn off

FAQ

• Why can’t the speaker be turned on?

  • Please check whether the speaker is still with power. If not, please charge it for more than half an hour before turning it on.
  • Please long press the power button, if you press it too shortly or at a wrong position, the speaker may fail to turn on.

• Failure to connect with the speaker?

  • Check whether the speaker is powered on normally and ready for pairing. (Please check it by the indicator light or prompt tone.)
  • Check whether the speaker is connected to another device. If so, please disconnect with it and make a reconnection again.
  • Turn off the phone’s BT function and the speaker, then turn them on again for reconnection.
  • If the speaker still cannot be connected after above operations, you can restore it to factory settings.

• Why does jamming/discontinuity occur when listening to songs?

  • The speaker’ signal may be disconnected because of the long distance between the speaker and connected device. Please keep them within 12m distance.
  • The speaker’ signal may be interfered when being used in an environment with strong interference. Please make sure there’s no large shield, metal partition or large interference source around you.
  • Please make sure the phone’s signal and network are in good condition, in case of poor signal or network cache problems, jamming or discontinuity will happen to your speaker.

• Why is the sound of the speaker too low or mute?

  • It may be that the playback channel of the mobile phone is turned off. You can turn on the phone’s BT function, click the icon on the right side of connected device and turn on the media channel.
  • Open the “Settings” interface, check if there is a maximum volume limit on the phone.
  • The volume up/down control of the speaker and the mobile phone may be operated separately due to different settings of mobile phones (such as Android). Please adjust the volume of both the mobile phone and the speaker according to the settings of the mobile phone.

• Failure to work when the speaker is connected to the computer?
  In case of BT connection, please turn on the output channel of the computer and set the speaker output mode as default mode.

• Why can’t the speaker be charged?

  • The charging port and cable may not be connected properly, please pull the cable out and plug it in again repeatedly to make sure it is well inserted.
  • Please use adapters that conform to national/regional safety standards together with the included charging cable to charge the product. Unqualified or unguaranteed charging cables may damage the speaker.

Safety Criteria

• Please follow the instructions, do not disassemble the product or refit it for any reason, otherwise it may break down or burn down.
• Do not immerse it in any liquid or wash it with water.
• Please use adapters that conform to national/regional safety standards together with the included charging cable to charge the product, otherwise its battery may be damaged or cause safety problems.
• Please use and store it in normal temperatures; too low or too high temperature (below 0℃ or above 45℃) is not permitted.
• Do not block the openings of the product, such as charging port, indicator, etc.
• Do not use it at high volume levels or for long periods of time to avoid dizziness or hearing damage.
• Do not use it under thunderstorm which may lead to abnormal performance and signal interruption.

WARNING

1. Before installing or operating the product, please refer to the electrical and safety information on the bottom of the shell.
2. Never expose the battery (or battery pack) to excessive heat, such as sunlight or similar heat sources.
3. Please follow the above safety instructions otherwise it will cause fire, electric shock, damage or other injuries.

Correct disposal of used electrical and electronic equipment

This product is in compliance with Directives 2012/19/EU and 2006/66/EU. It is strictly forbidden to dispose of this product with ordinary waste, instead it must be recycled. This symbol indicates that the product shall not be treated as household waste. Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

FCC NOTE

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>