JOYROOM JR-ZS298 Auto Match Wireless Car Charger Holder User Manual
- June 5, 2024
- Joyroom
Table of Contents
JOYROOM JR-ZS298 Auto Match Wireless Car Charger Holder
Parameters
Indicator Light
Product diagram
Air Vent Clip
Operating steps (Air vent)
- Put the universal ball into the nut first, then insert it into the socket on the back of the holder.
- Fasten the nut clockwise to its position.
- Loosen the knob and open the hook, insert the hook onto vent blade, then fasten the knob.
- Use the Type-C charging cable in the package to connect the charger and the car holder, the clamp arms will automatically open.
-
- Place your phone. The clarmp arms will automatically lock and align with it to start charging.
-
- Press the side button to open the clamp arms and take out you phone.
Warning
- Do not disassemble or refit the product.
- Do not store it in a wet environment.
- Please keep the product away from heat and do not charge it near a heat source
- Please prevent water or other liquid from entering the product interface. Otherwise the product may be damaged.
- Do not install the wireless car charger mount over an air bag cover or within the air bag deployment zone.
- During charging, make sure to remove the metallic/magnetic protective case or cards (like bank cards), etc. from your device.
- During charging, the charger may heat up. This is a normal occurrence and wont affect its performance.I the charger or your phone is too hot, please disconnect the power supply and let it cool down before restarting the charging process
- Avoid using bent or damaged USB cables.
Warranty
A. If there is performance failure on this product and it’s not caused by
human error damage, we will provide a 12-month free warranty service for
consumers from the date of purchase.
B. Warranty Exceptiors
- Human damage,
- Beyond the warranty period
- Failure to provide valid purchase certificate
- Product damage caused by failure to folow the use, maintain and preserve instructions
- Product damage caused by dismantle it or repair the product without authorization, or immersing the product in water,
- Damage caused by other force majeure.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.