TRIPP-LITE U442-DOCK4-INT USB 3.2 Gen 1 USB-C Docking Station Owner’s Manual

: June 3, 2024
: Tripp Lite

Table of Contents

U442-DOCK4-INT USB 3.2 Gen 1 USB-C Docking Station
Product Features
System Requirements
Package Includes
Optional Accessories
Product Overview
Installation
Multi Monitor Requirements
Specifications
Warranty and Product Registration
Read User Manual Online (PDF format)
Download This Manual (PDF format)

U442-DOCK4-INT USB 3.2 Gen 1 USB-C Docking Station
Owner’s Manual

U442-DOCK4-INT USB 3.2 Gen 1 USB-C Docking Station

Owner’s Manual
USB 3.2 Gen 1 USB-C Docking Station – Silver
Models: U442-DOCK4-S, U442-DOCK4-INT
USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

WARRANTY REGISTRATION
Register your product today and be automatically entered to win an ISOBAR® surge protector in our monthly drawing **tripplite.com/warranty**

Product Features

Supports USB DisplayPort Alternate Mode for connecting a VGA, DisplayPort or HDMI monitor via a USB-C or Thunderbolt 3 port
Supports the connection of three monitors at the same time through DisplayPort MST Mode*
Supports connection of DVI monitor via HDMI to DVI adapter (see Optional Accessories)
Supports connection of Mini DisplayPort monitor via DP to Mini DisplayPort adapter (see Optional Accessories)
DisplayPort and HDMI ports support 4K x 2K video resolutions up to 3840 x 2160 @ 30 Hz
VGA port supports video resolutions up to 1920 x 1200, including 1080p @ 60 Hz
Ethernet port supports true 10/100/1000 Mbps network speeds
USB-A hub ports support data transfer rates up to 5 Gbps
Dedicated 5V/1.5A USB port provides fast charging power to mobile devices
USB-C port supports both data and PD Charging; supports power input up to 20V 5A (100W)
USB-C and 4 USB-A ports share a max 12W (5V 2.4A) of power
3.5 mm Mini Stereo jack on front of unit for connection of speaker and microphone
3.5 mm Mini Stereo jack on back of unit for connection of speaker
Automatically resumes operation from hibernation and suspend mode
IEEE 802.3az (Energy Efficient Ethernet) compliant
Supports full duplex and half duplex operations
Supports IPv4 and IPv6 pack Checksum Offload Engine (COE) to reduce CPU loading
Supports Wake-on LAN
Plug-and-play operation with no software required for easy, immediate installation
See Multi-Monitor Requirements section for details

System Requirements

Computer with USB-C or Thunderbolt 3 port that supports USB DisplayPort Alternate Mode
DisplayPort, Mini DisplayPort, VGA, DVI or HDMI monitor
Ethernet network with speeds up to 10/100/1000 Mbps
*Requires an adapter. See Optional Accessories

Package Includes

U442-DOCK4-S or U442-DOCK4-INT
USB Type-C Cable, M/M (2.6 ft.)
External Power Supply (Input: 100-240V, 50/60 Hz, 1.8A; Max Output: 20V 3.6A)
BS1363 UK and CEE 7/16 EU Power Cords (U442-DOCK4-INT Only)
Owner’s Manual

Optional Accessories

N201-Series Cat6 Gigabit Snagless Patch Cables
P502-Series High-Resolution VGA Cables
P566-Seires HDMI to DVI Adapter Cables
P568-Series High-Speed HDMI Cables
P580-Series DisplayPort Cables
P583-Series mDP to DP Adapter Cables
U322-Series USB A/B Device Cables
U326-Series USB Micro-B Device Cables
U420-003-G2-5A USB 3.2 Gen 2 USB-C M/M Cable (3 ft.)

Product Overview

TRIPP LITE U442 DOCK4 INT USB 3 2 Gen 1 USB C Docking Station - Product
Overview

USB-A 3.2 Ports (Female) – Connect up to four USB peripherals*
3.5 mm Mini Stereo Audio Input (Female) – Connect headphones or a microphone
USB-C Host Port (Female) – Connect your USB Type-C enabled laptop or computer
DC Power Input (Female) – Connect included power supply for external power
USB-C Charging and Data Port (Female) – Connect your device to its USB-C PD charger for charging, or connect a USB-C device
3.5 mm Mini Stereo Audio Output (Female) – Connect speakers or headphones
RJ45 Port (Female) – Connect to a 10/100/1000 Mbps network
VGA Port (Female) – Connect a VGA monitor
HDMI Port (Female) – Connect a HDMI monitor
DisplayPort Port (Female) – Connect a DisplayPort monitor

*12W of power is dedicated to the USB-A and USB Type-C hub ports when a USB charger is connected to the USB-C charging port. The USB-A dedicated charging port supports 5V 1.5A (7.5W). When maxing out one port’s power, the other ports’ power is reduced. All ports will not be able to provide full power simultaneously, meaning external power may be required for some connected peripherals.

Installation

Notes:

Supports the connection of three monitors at the same time through DisplayPort MST Mode.*
To ensure proper function of the five USB (4 USB-A and 1 USB-C) hub ports, make sure to plug in the included external power supply or the host device’s PD charging power supply to the unit.
When the included 72W power adapter is connected to the DC port, it supplies power to charge the host PC first (up to 60W) with the rest of the power being supplied to the dock.
When the PD charging power adapter is connected, 15W of total power will be reserved first to guarantee the functioning of the product. The rest of the power will be used to charge the host PC (the power that the host PC can get depends on the result of PD protocol negotiation).
When the DC port is connected prior to the Type-C PD Charging port, the docking and host PC are powered from the DC port, with the Type-C port as an alternative power source.
When the Type-C PD Charging port is connected (with a PD power adapter) prior to the DC port, the docking and host PC are powered from the Type-C port with the DC port as an alternative power source.
If the active power source (power source that is supplying power) is unplugged, the alternative power port will be switched on automatically to be the active power source. In this case, the connected devices will get disconnected for a few seconds and then reconnect automatically.
See Optional Accessories section for suggested cables.
When the unit is connected to the USB-C port on your computer and to a network via Cat5e/6 cabling, a network connection will be automatically established. If no connection is made, you can manually establish one by going to your computer’s network settings page. For example, on a Mac, you would navigate to the Network section found in System Preferences, click the “Assist Me” button to get to the Network Setup Assistant, then follow the prompts to establish a connection.

See Multi-Monitor Requirements section for details.
1. Connect the included power supply between the unit and a power source and/or the included USB Type-C cable between the unit and a PD charging adapter (not included).
  Note: The USB hub ports may go into overcurrent protection if high- powered USB peripherals are attached without the external power adapter being connected. The USB Type-C PD Charging port can also be used for data transfer.
2. Connect a USB Type-C enabled laptop or computer to the unit’s USB Type-C host port using a USB Type-C cable.
3. Connect a 3.5 mm Mini Stereo cable to the back of the unit to connect a speaker.
4. Connect up to four USB devices to the dock’s USB-A hub ports.
5. Connect the adapter’s RJ45 port to a network using a UTP cable.
6. Connect the dock’s VGA port to the VGA port on a monitor using a VGA cable.
  OR
7. Connect the dock’s HDMI port to the HDMI port on a monitor using a HDMI cable.
  OR
8. Connect the dock’s DisplayPort port to the DisplayPort port on a monitor using a HDMI cable.
9. Connect a 3.5 mm Mini Stereo cable to the front of the unit to connect a microphone or headphones.

Multi Monitor Requirements

The U442-DOCK4-S and U442-DOCK4-INT support the connection of three monitors at the same time through DisplayPort Multi-Stream Transport (MST) mode. Below are limitations that must be taken into account when connecting multiple monitors at the same time.
Does the Source Computer Support DisplayPort MST Mode?
When connecting to a USB-C source that supports DisplayPort MST mode, the EDID information of the two or three connected monitors will be read by the computer and
appear as separate displays that can be shown in mirror mode or extended mode. When connected in MST mode, the computer graphics card will have a total bandwidth of 10.8 Gbps for all video ports.
When connecting to a USB-C source that does not support DisplayPort MST mode, Single-Stream Transport (SST) mode is used instead. In SST mode, only the EDID of
the first connected monitor is read by the computer, forcing the connected monitors to display in mirror mode. The default resolution of the first monitor will then be sent to the second monitor and/or third monitor, with all monitors displaying the same resolution. If the second monitor is not capable of supporting the same resolution as the first, no video will display on that monitor. Before connecting the second monitor, the first monitor’s resolution must be changed to the second monitor’s resolution in order for video to be displayed.
Note: The following table depicts the maximum resolution achieved on each video port, based on the connected monitors. Mac does not support DisplayPort MST; therefore, multiple monitor setups are not guaranteed.

Windows Source (Single display)

VGA| HDMI| DisplayPort
1920 x 1200 @ 60 Hz| |
| 3840 x 2160 @ 30 Hz|
| | 3840 x 2160 @ 30 Hz
| |
Windows Source (Dual display)
VGA| HDMI| DisplayPort
1920 x 1200 @ 60 Hz| 1920 x 1080 @ 60 Hz|
1920 x 1200 @ 60 Hz| | 1920 x 1080 @ 60 Hz
| 1920 x 1080 @ 60 Hz| 1920 x 1080 @ 60 Hz
| |
Windows Source (Triple display)
VGA| I HDMI| I DisplayPort

Supports 3 displays to work simultaneously under MST mode, 3 videos share max 10.8 Gbps bandwidth (e.g., dual 1080p/60 Hz, or 1 x 1080p @ 60 Hz + dual 720p @ 60 Hz).
Some host PCs only support output of 3 video streams/monitors. To ensure the output of the 3 displays, tum off the screen of the host PC.

Specifications

Connectors-Input

Warranty and Product Registration

3-Year Limited Warranty
Tripp Lite warrants its products to be free from defects in materials and workmanship for a period of three (3) years from the date of initial purchase. Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from Tripp Lite or an authorized Tripp Lite service center. Products must be returned to Tripp Lite or an authorized Tripp Lite service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, Tripp Lite MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL Tripp Lite BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, Tripp Lite is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Product Registration
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marketing name or model number of the product.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.

1111 W. 35th Street, Chicago, IL 60609 USA •tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
All trademarks and registered trademarks are the property of their respective owners.