AMERICAN LIGHTING DMX512 Wireless Transceiver Instruction Manual

June 3, 2024
American Lighting

AMERICAN LIGHTING DMX512 Wireless Transceiver Instruction Manual

AMERICAN LIGHTING DMX512 Wireless Transceiver Instruction
Manual

  • wireless DMX512 transceiver transfers the standard DMX512 protocol data wirelessly. One emitter matches one or multiple receivers if using the same ID. !Supporting point-to-point, point to multipoint communication],
  • is used for data transmission between DMX console and lights, or between lights and lights, which replace the wired transmission. The data will not be delayed, will be true and reliable during transmission process.
  • with automatic frequency hopping function, transceiver will automatically choose clear channel to send DMX512 data when works as an emitter. and can search and match the correct channel to receive OMX 512 data when works as a receiver.
    Use relay settings or connect to booster antenna to further the communication distance.

1. Technical Specs:

2. Product Size:

3. Configuration Diagram:

4. Dip Switch Operation:

4.1 Dip Switch 9-10: Mode
4.2 Dip Switch 7-8: transmission power
4.3 Dip Switch 1-6

5. Wiring Diagram:

5.1 One sending end, multiple receiving ends:
5.2 Relay way to extend the communication distance,

AMERICAN LIGHTING DMX512 Wireless Transceiver Instruction Manual - Relay way
to extend the communication distance

6. Attention:

  • 6.1 The product shall be installed and serviced by the qualified person.
  • 6.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure it is mounted in a water proof enclosure.
  • 6.3 Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
  • 6.4 Please check if the output voltage of the LED power supply used comply with the working voltage of the product.
  • 6.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is secured tightly in the connector.
  • 6.6 Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.
  • 6. 7 If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

American Lighting User Manuals

Related Manuals