J-TECH DIGITAL V913 Wireless Ergonomic Mouse User Manual
- June 3, 2024
- J-TECH DIGITAL
Table of Contents
J-TECH DIGITAL V913 Wireless Ergonomic Mouse
INTRODUCTION
Thank you tor purchasing this mouse, please read the manual carefully before use to avoid unnecessary trouble.
Distribution map of functions
Mouse Usage
-
The mouse is in 2.4G mode, and you can choose to use 1 AA or AAA battery.
-
How to code:
Turn on the power switch, and press the middle right button for 3 seconds. When the LED on the bottom lights up red, please insert the receiver. After completing the code, the mouse will work normally. The factory default matching is completed. -
DPI Settings:
There are 3 grades of DPI, 800-1200 (default) -1600. Short press the DPI button to cyclically switch DPI, 800DPI (the indicator flashes once, and then turns off) -1200DPI (the indicator flashes twice, and then turns off)- 1600DPI (the indicator flashes three times, and then turns off). DPl has no memory function. -
Report rate: 250Hz
-
Wake up the mouse: Default movement wakes up the mouse; no deep sleep
-
Low voltage reminder: When the battery voltage is lower than 1.1V, the DPI switching indicator will flash to remind the user to replace the battery in time.
-
Working distance: 10M/32ft.
-
Compatibility: Compatible with Windows 7/8/10/MAC Os
Design Notes:
- Size: 70x100mm (tolerance +/-1mm)
- Material: 70g writing paper
- Color: monochrome printing
- Binding method: organ folding
CONTACT US
WWW.JTECHDIGITAL.COM
9807 EMILY LANE
STAFFORD, TX 77477
TEL: 1-888-610-2818
E-MAIL: SUPPORT@JTECHDIGITAL.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>