TESLA TechToy Smart Bulb RGB 6W E14 ZigBee User Manual

: June 3, 2024
: Tesla

Table of Contents

TESLA TechToy Smart Bulb RGB 6W E14 ZigBee
Instructions for use
Use and connection
Open the “Tesla Smart app“
Technical specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TESLA TechToy Smart Bulb RGB 6W E14 ZigBee

TESLA TechToy-Smart-Bulb-RGB 6W-E14-ZigBee-PRODUCT-IMG

Instructions for use

The bulb can be used through the “Tesla Smart” app.
You can set the light up in the app, creating various scenarios and schedules.

Information about the “Tesla Smart” app Download the free “Tesla Smart” app for Android or iOS. Systems requirements for app use:

iOS 8.0 or newer
Android 4.4 or newer

Use and connection

Download and install the „Tesla Smart“ app from the Apple App Store or Google Play on your device. You can get a direct link to download the app by scanning the QR code below. TESLA TechToy-Smart-Bulb-RGB 6W-E14-ZigBee-
FIG-

The supplied bulb can be inserted into various fittings, e.g. into a ceiling light, free-standing lamp or table lamp. It is necessary that each of these flight fittings has a suitable socket.

Switch off the lights and disconnect from the mains power (if possible). and/or turn off the room’s fuses in the fuse box.
If necessary, let the previously inserted bulb cool down.
Remove the old bulb and screw the new bulb into the fitting.
Plug the light back into the mains power and/or switch the building’s fuse back on and set the switch to the on position.

Open the “Tesla Smart app“

Create a new account or log in to your existing account.
To connect, you must have a properly configured Tesla Smart ZigBee Hub.
Screw the bulb into the fitting and turn on the power. Make sure the bulb is in pairing mode (when switched on, the bulb will cycle through its colours or flash briefly)
Open the Tesla Smart ZigBee Hub in the app and click on: „Add a sub-device“.
Confirm pairing and wait for completion of con-figuration.
Now the system can be configured and shared with family and friends. You can also use voice assistants such as Amazon Alexa or Google Assistant to control the light.
Connecting a voice assistant
Select the unit to which you want to connect the voice assistant.
Click on the pen symbol to view information about the unit.
Select the voice assistant that you want to connect.

Safety warning

This product may only be opened by an authorised person – risk of electric shock!
In case of trouble, unplug the power cable from the power supply.
Read the instructions carefully before use. Retain these instructions for possible future use.
Only use the device for the intended purpose. Do not use the device if any part of it is damaged. If the device is damaged, it must be replaced immediately.
The device is intended for indoor use only. Do not use the device outside. Do not expose the product to water or moisture.
Do not touch the device with wet hands.
Make sure the bulb matches the lamp fitting.

Technical specifications

Power/Light output.
Colour temperature: 2 200 K – 6 500 K + RGB
Power supply: 220-240 V AC / 50/60 Hz
Radio connection ZigBee EEE 802.11b/g/n <20 dBm
Operating temperature: -20 °C – +50 °C
Radio range (max): 45 m outside

INFORMATION ABOUT DISPOSAL AND RECYCLING

This product is marked with the symbol for separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorisation and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimise impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorised service centre or local authorities.

EU DECLARATION OF CONFORMITY

Hereby, Witty, s.r.o declares that the radio equipment type A60-PA-ZBLIC-TY- RGBCW y1 , C37-PA-ZBLIC-TY-RGBCW y2, GU10-PA-ZBLIC-TY-RGBCW y3 is in compliance with 2014/53/UE directives. The full text of the EU declaration of conformity is available at the following internet address: tsl.sh/doc