Bona Belt UX Service Kit Instruction Manual
- June 3, 2024
- Bona
Table of Contents
Bona Belt UX Service Kit
HOW TO ATTACH THE CABLE HOLDER
Tools you need: No tools needed
Before starting, make sure that the machine is switched off and the power cord disconnected from the socket.
- Insert the cable holder in the center hole on the handle.
- Fold down the cable holder and insert the cable into the holder.
HOW TO ATTACH THE DUSTBAG
Tools you need: No tools needed
Before starting, make sure that the machine is switched off and the power cord
disconnected from the socket.
- Slide the dustbag over the tube.
- Tie it to the tube using the strings on the dustbag.
HOW TO REPLACE THE DRIVE BELT
Tools you need: No tools needed
Before starting, make sure that the machine is switched off and the power cord
disconnected from the socket.
- Check the movement of the pulley and the condition of the belts.
- Pull the lever to lower the motor and reduce the tension of the belts.
- Remove the old belts.
- First install the new Drive Belt Drum XL.
- Then install the new Drive Belt L.
- Increase the tension of the Drive belts by raising the motor back into position.
Watch the instruction videos here!
Documents / Resources
| Bona
Bona Belt UX Service
Kit
[pdf] Instruction Manual
Bona Belt UX Service Kit, Bona Belt UX, Service Kit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>