Bona Premium Spray Mop for Hard-Surface Floors User Manual
- June 7, 2024
- Bona
Table of Contents
Bona’ Premium Spray Mop for Hard-Surface Floors
Box Includes
A. Upper Spray Mop Handle 
B. Lower Pole with Cartridge Enclosure
C. Mop Base 
D. Bona Microfiber Cleaning Pad 
E. Bona Floor Cleaner Cartridge
Assembly Instructions
The silver Cartridge
Release Button on the Lower Mop Pole (B) (Fig A) and the Bona logo on the mop
base (C) should both be facing the front. Ensure that the swivel knuckle on
the mop pole is facing down before attachment. Attach mop pole to mop base by
aligning recessed slots in knuckle with tabs of similar size in mop base (Fig
B). Push to connect. Attachment should happen without excessive force. If not,
tabs and recesses may not be aligned correctly.
Attach Upper Spray Mop Handle (A) to Lower Pole with Cartridge Enclosure 03)
by aligning similar profiles of the poles and pushing together until a click
is heard.
Attach Bona. Microfiber
Cleaning Pad to Mop Base by plating pad on the floor with the printed side
facing up. Place the mop base o‘er the center of the pad and press down firmly
to attach. The Bone logo on the Mop Base should face forward while mopping.
Remove the cap from the cleaning cartridge, and engage into the cartridge endorsed by pushing in until a click Is heard. Your mop is now ready to use! When the cartridge is empty. press the SINtf cartridge release button to disengage the cartridge before refilling.
Cleaning the Microfiber Pads
Wash .n warm water
Air or tumble dry low
DO NOT use bleach
DO NOT use fabric softeners
DO NOT wash with articles that shed lint
Bona.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>