Bona WM710013497 Premium Spray Mop for Hardwood Floor Instructions
- June 6, 2024
- Bona
Table of Contents
Bona WM710013497 Premium Spray Mop for Hardwood Floor
Box Includes
- Upper Spray Mop Handle
- Lower Pole with Cartridge Enclosure
- Mop Base
- Bona Microfiber Cleaning Pad
- Bona Floor Cleaner Cartridge
Assembly Instructions
The silver Cartridge Release Button on the Lower Mop Pole (B) (Fig A) and the
Bona logo on the mop base (C) should both be facing the front. Ensure that the
swivel knuckle on the mop pole is facing down before attachment. Attach mop
pole to mop base by aligning recessed slots in knuckle with tabs of similar
size in mop base (Fig B). Push to connect. Attachment should happen without
excessive force. If not, tabs and recesses may not be aligned correctly.
Attach Upper Spray Mop Handle (A) to Lower Pole with Cartridge Enclosure (B)
by aligning similar profiles of the poles and pushing together until a click
is heard.
Attach Bona: Microfiber Cleaning Pad to Mop Base by placing the pad on the
floor with the printed side facing up. Place the mop base over the center of
the pad and press down firmly to attach. The Bona”‘ logo on the Mop Base
should face forward while mopping.
Remove the cap from the cleaning cartridge, and engage into the cartridge enclosure by pushing in until a click is heard. Your mop is now ready to use! When the cartridge is empty, press the silver cartridge release button to disengage the cartridge before refilling.
Cleaning the Microfiber Pads
- Wash in warm water
- Air or tumble dry low
- DO NOT use bleach
- DO NOT use fabric softeners
- DO NOT wash with articles that shed lint