ARESA AR-2305 Garment Steamer Instruction Manual
- June 3, 2024
- ARESA
Table of Contents
AR-2305
GARMENT STEAMER
INSTRUCTION MANUAL
AR-2305 Garment Steamer
Thank you for purchasing our products.
Make sure that the stamp of the store, the signature and the date of sale are
supplied in the warranty card.
ITEM DESCRIPTION
- Steam supply surface
- Steamer body
- On/off button
- Steam button
- Handle adjustment button
- Handle
- Power cord.
- Water filling inlet
- Water tank
- Water tank retainer
- Measuring cup
- Gentle cleaning brush
- Cloth brush
- Bottle connector
SET
Garment steamer – 1
Cloth brush – 1
Gentle cleaning brush – 1
Bottle connector – 1
Measuring cup – 1
Warranty card – 1
Instruction manual – 1
Gift box – 1
Please read this instruction manual carefully before using the appliance.
Save the instruction manual as you may require it in future.
Use the garment steamer for smoothing clothes, removing wrinkles with the help
of stream.
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE ONLY
After unit transportation or storage at low temperature it is necessary to
keep it for at least 4 hours at room temperature before switching on.
TECHNICAL SPECIFICATIONS
Supply voltage: 220-240 V ~ 50 Hz
Power consumption: 1400-1750 W
Water tank volume – 350 ml
Warranty period in the European Union – twenty four months
IMPORTANT SAFEGUARDS
- Read this manual carefully before operating the steamer to avoid damage during use.Incorrect handling can lead to damage of the product and to the health of the user.
- Before the first use make sure that the product specifications match the mains supply.
- The steamer is not intended for use by persons (including children) with reduced physical, sensory or mental ability, or lack of experience or knowledge, if they are not controlled or notinstructed on the use of the device by the person responsible for their safety.
- Do not leave unattended the device in operation or still hot, especially if there are children near it.
- Avoid contact with the hot surface of the steam iron and the power cord of the steamer. Do not put pencils or otherItems in the steamer holes of the steamer
- Do not use the steamer if the cord or plug is damaged, or if the appliance itself is damaged or defective. In case of problems, take the steamer to the service center. Do not repair the appliance yourself.
- If the power cord is damaged, it must be replaced by the manufacturer, after-sales service or any qualified personnel.
- Do not allow the power cord to touch sharp edges.
- Always unplug the steamer when not in use.
- Do not use the steamer without water. When using the steamer, monitor the water level in the tank.
- Always unplug the steamer from the mains before filling or draining the water tank.
- Fill the tank only with distilled (non-mineral) water. Never fill with liquids, such as Detergent, gasoline, vinegar, and the like.
- While using do not direct the steam iron toward humans or animals.
- Do not place the steamer near open flames, ovens, or other heaters.
- Do not use accessories that are not included in the set.
- Do not use the steamer outdoors or in humid conditions, especially near bath, shower or swimming pool. To prevent electric shock, do not operate the steamer with wet hands.
- To reduce the risk of electric shock, do not immerse the steamer, plug, cord in water or other liquids.
- To avoid burns do not install accessories during use.
- Do not steam directly on people.
- When disconnecting the steamer from the mains, hold the plug with hand, do not pull on the power cord. Do not twist and do not wind the cord around the device.
- Make sure that the device is cooled before storing it.
- Do not use the steamer for purposes not specified in the instructions. To prevent accidents, do not cover the steamer!
- Use the steamer only for domestic purposes in accordance with this Operation Manual.
The steamer is not suitable for industrial or commercial use. Guarantee does not apply on faults caused by the use of products for purposes that go beyond personal domestic needs (ie for industrial or commercial purposes).
OPERATION
Remove all packing material. Make sure that the voltage indicated on the
appliance matches the mains voltage.
Before switching on, make sure that the soleplate is not dirty, the water tank
is clean.
Detach the water tank from the steamer body by turning it clockwise. Open the
filler cap located at the bottom of the water tank. Fill the water tank with
water up to the MAX mark and close the lid tightly. Connect the water tank to
the body of the device. Connect the steamer to the mains. Press on / off
button to turn on the appliance. Red heating indicator will light up and
blink. In 20 seconds the device will heat up and the indicator will stop
blinking. It means that the steamer is ready for use.
Then select the required steaming mode by pressing the steam button .
Different indicator colors correspond to different steaming modes (green for
moderate steam and blue for more powerful steam flow).
Attention! The first steam start may contain water droplets. It is recommended
to press the steam button and direct the steam flow to the opposite direction
for a few seconds.
If you need to stop steaming, press on / off button . It will light up red.
Note! During steaming, small wet spots may occur on clothes.
Attention! Do not lay the steamer horizontally or turn it upside down during
operation. Otherwise, steam will be dispensed unevenly. Always hold the
steamer upright. Do not put your hand under the cloth which is steamed while
the appliance is operating. Straighten the fabric by pulling on the edges.
Attention! Never direct the steamer at a person.
Using attachments.
The nozzles improve steam penetration into thick and heavy fabrics or prevent
delicate fabrics from exposure to high temperatures. They also remove lint and
other fine dirt from clothes, facilitate smoothing of folds. Place the
attachment you want (a brush for cleaning clothes or a brush for cleaning
delicate fabrics) onto the steamer nozzle. Run the nozzle slowly over the
fabric while steaming.
Using a water bottle.
It is possible to use a plastic water bottle instead of the tank supplied in
set. Fill a plastic bottle with water and close it using the supplied adapter.
Place and fix the plastic bottle with the adapter on the steamer body by
turning it counterclockwise until it stops.
Auto shut off function.
If the steamer is not in use and is in an upright position for 20 minutes,
auto shut off function will activate. In this case, the operation indicator
will blink, heating will stop. To resume work, you should press on / off
button .
Completion of work.
To turn off the steamer, press on / off button, unplug the power cord from the
outlet and let the steamer cool down.
Open the filler cap and drain the remaining water from the reservoir.
Attention! The time of continuous operation of the steamer should be no
more than 15-20 minutes.
CLEANING, TRANSPORTATION AND STORAGE
TRANSPORTATION. Transport the device by any kind of enclosed transport
observing the rules which ensure preservation of market condition of both the
product and packaging, and its further safe operation.
CLEANING. Before cleaning or servicing the steamer unplug it from the
mains, let it cool down and drain the water from the water tank.
ATTENTION! Never wash the parts of the appliance in the dishwasher. Do
not use chemicals or abrasives.
Wipe the surface of the appliance with a soft, damp cloth and then wipe dry.
Rinse the attachments under running water, after removing them from the
steamer.
Never immerse the steamer itself, the power cord, or the power plug in water
or any other liquid.
STORAGE. The device must be stored indoors, in conditions that presume
its further safe operation. Make sure that the appliance and all its
accessories are completely dried before storing it. Always store the iron in
an upright position.
RECYCLING
The appliance and packing materials must be disposed with the least harm to the environment and in accordance with the rules for waste disposal in your area.
WARRANTY TERMS
When purchasing the product, ask for it to be checked in your presence.
Without having a warranty card or when it is not properly filled in, the
quality claims are not accepted, and no warranty repair is performed. The
warranty card should be presented at any address to the service center during
the whole warranty period. The product is accepted for service in a complete
set only. The warranty period is calculated from the moment of sale to the
buyer. Keep the documents confirming the date of purchase of the product (cash
receipt).
The condition of free warranty service of your product is its correct
operation, which does not go beyond personal domestic needs, in accordance
with the requirements of the operating instructions for the product, the
absence of mechanical damages and the consequences of careless
handling of the product.
The product is accepted for warranty service in its pure form. The warranty
covers all manufacturing and construction defects (except those listed in the
“Warranty does not apply” section), identified during the warranty period.
During this period defective parts, except consumables, are subject to free
replacement in the warranty service center.
THE GUARANTEE DOES NOT COVER:
- Defects caused by force majeure.
- Damage to the product caused by the use of the product for purposes that go beyond personal domestic needs (ie industrial or commercial purposes).
- Consumables and accessories (sections, etc.).
- Defects caused by overloading, improper operation, penetration of liquids, dust of insects, ingress of foreign objects into the product.
- Products that have been repaired outside authorized service centers or warranty workshops.
- Damage resulting from changes in the design of the product by the user or unqualified replacement of his components.
- Mechanical damages, including due to negligent handling, improper transportation and storage, falling of the product.
- Violation of the operating instructions.
- Incorrect installation of mains voltage (if required).
- Making technical changes.
- Damage through the fault of animals (including rodents and insects).
Information on the production date can be found on a separate package.
For warranty service, please contact your nearest service center.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>