ARESA AR-1909 Mixer Instruction Manual

ARESA AR-1909 Mixer

Thank you for purchasing our products. Make sure that the stamp of the store, the signature and the date of sale are supplied in the warranty card.

• www.aresa-techno.com
• www.aresa-techno.ru

ITEM DESCRIPTION

1. Shaft for nozzles
2. Locking lever
3. peed controller
4. Bowl
5. Dough hook
6. Eag and cream beater
7. nozzle
8. Bowl rid

SET

• Mixer – 1
• Stainless steel bowl -1
• Egg and cream beater – 1
• Dough hook – 1
• Mixing nozzle – 1
• Egg separator – 1
• Protective transparent lid – 1
• Warranty card – 1
• Instruction manual – 1
• Gift box – 1

Please read this instruction manual carefully before using the appliance. Save the instruction manual as you may require it in future. The device should be used for mixing products (for beating eggs, cream, cocktails, mousse, omelet, dough, mashed potatoes, sauces and other products). For household use, not suitable for industrial use. The device is intended for use only for domestic purposes in accordance with this Instruction Manual. After unit transportation or storage at low temperature it is necessary to keep it for at least 4 hours at room temperature before switching on.

TECHNICAL SPECIFICATIONS

• Supply voltage: 220-240 V ~ 50 Hz
• Power: 1000 W
• Warranty period in the European Union – twenty four months

IMPORTANT SAFEGUARDS

• Read this manual carefully before operating the unit to avoid damage during use. Incorrect usage can lead to damage to the product, cause material damage or cause damage to the health of the user.
• Before the first use check that the product specifications match the mains supply.
• The device is not intended for use by persons (including children) with reduced physical, sensory or mental abilities or if they have no experience or knowledge, if they are not controlled or instructed about the use of the device by a person,responsible for their safety.
• Do not use the appliance if the cord or plug is damaged, or if the appliance is damaged or defective. Take it to the service Centre. The appliance must be repaired only by an authorized service center. Do not repair the appliance yourself.
• If the power cord is damaged, it must be replaced by the manufacturer, after-sales service or similar qualified staff.
• Before disconnecting from the mains, make sure that the speed selector is in the “0” position. Do not pull on the power cord, do not wind do not twist it.
• To avoid electric shock, do not immerse the appliance in water or other liquids, do not wash the mixer with running water. If the device fell into the water, do not touch the water! Immediately unplug the appliance and then remove it. Contact the service center for inspection or repair of the product.
• Do not let the cord hang over the edge of the table or over hot surfaces.
• Do not handle the power cord with wet hands.
• Unplug the appliance if it is not in use, and if you want to remove or add accessories and before cleaning. Do not leave the appliance included.
• Do not place the appliance, nor its components in the dishwasher.
• Do not use the appliance for purposes other than those specified in the instruction manual.
• Do not allow children to use the mixer or its parts.
• Be extremely careful when children are near the appliance.
• Do not use the appliance near hot surfaces.
• Before using the appliance, make sure that the attachments are correctly installed in the mixer.
• Make sure that the motor has completely stopped before removing the attachments.
• Do not use accessories that are not included in the delivery.
• This appliance is intended for household use only. Do not use it for commercial or other purposes that go beyond household use.
• The mixer is designed exclusively for food processing. Do not mix paint and solvents with a mixer.
• Do not use the appliance outdoors.
• Make sure that the plug of the appliance is suitable for your outlet. Otherwise, contact the service center for assistance. Do not use If the power cord and / or plug are damaged.
• Do not operate the device with wet hands.
• Do not touch the rotating parts with your hands or other objects during operation!
• Do not use the appliance and its accessories in a microwave oven.
• Do not use the appliance for hard and hard ingredients and inedible parts of products. When working with viscous products, the engine may burn out.
• The manufacturer reserves the right to make minor changes to the product design without additional notice, not affecting its safety, performance and functionality.
• Keep this instruction manual.

OPERATION

Unpack the device and make sure that there are all the accessories in the set (see the Contents section). Remove the packing materials from the device. Make sure that the accessories and the power cord are not damaged. Before the first use clean all the parts of the appliance that will come into contact with food (attachments, bowl, bowl lid). Before assembling the mixer make sure the power cord is unplugged. Never connect the appliance to the mains without the installed bowl.

1. Place the device on a flat, clean and dry surface.

2. Press the locking lever (2) of the motor part and lift it up.

3. Install the bowl (5) into the base, aligning the tabs on the bowl with the grooves on the base, and turn clockwise until it locks.

4. Put some food in the bowl. Please do not overload the bowl. Please note that the maximum amount of ingredients should not exceed 2/3 of the bowl.

5. Select the necessary attachment and install it on the shaft (1).
   To install the attachment align the groove on its mounting end with the pin on the working shaft, push it up and turn it counterclockwise until it stops. Whisk (7) is used for whipping eggs, cream, for making air creams, mousses, desserts. The dough hook (6) is used for kneading heavy dough. The mixing attachment (8) is used to prepare batter, creams, icing, mashed potatoes, tomato paste.

   • Attention! Use only the attachments supplied with this appliance.

6. Press the locking lever (2) and move the motor part of the device down.

7. Install the bowl lid (9).

• Attention! When the appliance is in operation, you can add the ingredients to the bowl only through a special hole in the bowl lid.
• Attention! Never remove the bowl while the appliance is plugged in, it can be dangerous!

Switching on the device

1. Unwind the power cord of the appliance.

2. Insert the plug into the outlet, making sure that the speed control (3) is in “0” position.

3. This device has an 8-step speed controller.

4. Turn on the device by turning the speed control knob clockwise.
   Attention! To avoid splattering of food, turn on the appliance at a low speed first and then increase it gradually.
   Attention! For kneading the dough with a hook or mixing attachment, it is recommended to use the lowest speed setting, while the highest speed is recommended for whipping. ATTENTION! The time of continuous operation of the device should not exceed 6 minutes when using the dough hook, and 13 minutes for the whisk. The recommended break between switching on is 30 minutes.

5. For activation of pulse mode, turn the speed control knob counterclockwise to “P” position and hold it. In pulse mode the mixer works as long as you hold the regulator. If released, it will automatically return to “0” position.

Adding ingredients and changing attachments

1. Turn off the device by moving the speed control knob to “0” position. Disconnect the appliance from the mains by unplugging the power cord.
2. Wait until the drive has come to a complete stop.
3. Press locking lever (2) and lift it up.
4. Replace the attachment.
5. Add ingredients to the bowl.
6. Pressing the locking lever (2), move down the motor part of the device.
7. Plug the device in, turn it on by setting the required speed with the speed regulator (3).
8. When the appliance is in operation, use only the special hole in the bowl lid (9) for adding ingredients. ATTENTION THERE IS RISK OF INJURY FROM ROTATING NOZZLES! During operation of the device do not put your hands, other parts of the body and various objects into the bowl.The nozzles can be replaced only after the drive has come to a complete stop with the device is disconnected from the mains. Never remove the bowl when the appliance is plugged in, it can be dangerous!

After finishing work

1. Set the speed control knob (3) to “0” position and disconnect the device from the mains by pulling out the power plug from the socket. Wait until the drive has come to a complete stop.
2. Remove the bowl lid.
3. Press the locking lever (2) and lift up the motor part.
4. Remove the nozzle from the shaft (1) by pushing it up along the drive axis and turning it clockwise.
5. Remove the bowl (5) by turning it counterclockwise and take it out from the base of the appliance.

CLEANING, MAINTENANCE AND STORAGE

TRANSPORTATION. Transportation of the device is necessary by any kind of covered transport with the application of rules fastening of cargoes ensuring preservation of the presentation of the product and / or packaging and its further safe operation. DO NOT expose the device to shock loads during handling operations. CLEANING. ATTENTION! Never wash parts of the appliance in the dishwasher. Do not use chemicals or abrasives. Always unplug the appliance before cleaning. Clean the motor part with a soft, slightly damp cloth. Do not wash it under running water or immerse it in water or other liquids. For washing, use warm water (not more than 50 ° C) and a usual detergent. Parts of the appliance having direct contact with food must be cleaned every time after use. STORAGE. The device must be stored indoors, in conditions that presume the preservation of a presentation product and its further safe operation. Make sure that the appliance and all its accessories are completely dried, before storing it.

WARRANTY TERMS

When purchasing the product, ask for it to be checked in your presence. Without the having a warranty card or when it is not properly filled in, the quality claims are not accepted, and no warranty repair is performed. The warranty card should be presented at any address to the service center during the whole warranty period. The product is accepted for service in a complete set only. The warranty period is calculated from the moment of sale to the buyer. Keep the documents confirming the date of purchase of the product (cash receipt). The condition of free warranty service of your product is its correct operation, which does not go beyond personal domestic needs, in accordance with the requirements of the operating instructions for the product, the absence of mechanical damages and the consequences of careless handling of the product. The product is accepted for warranty service in its pure form. The warranty covers all manufacturing and construction defects (except those listed in the “Warranty does not apply” section), identified during the warranty period. During this period defective parts, except consumables, are subject to free replacement in the warranty service center.

THE GUARANTEE DOES NOT COVER

1. Defects caused by force majeure.
2. Damage to the product caused by the use of the product for purposes that go beyond personal domestic needs (ie industrial or commercial purposes).
3. Consumables and accessories (sections, etc.).
4. Defects caused by overloading, improper operation, penetration of liquids, dust, insects, ingress of foreign objects into the product.
5. Products that have been repaired outside authorized service centers or warranty workshops.
6. Damage resulting from changes in the design of the product by the user or unqualified replacement of his components.
7. Mechanical damages, including due to negligent handling, improper transportation and storage, falling of the product.
8. Violation of the operating instructions.
9. Incorrect installation of mains voltage (if required).
10. Making technical changes.
11. Damage through the fault of animals (including rodents and insects).

Production month: refer to the date on the gift box For warranty service, please contact your nearest service center.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>