ARESA AR-2304 Garment Steamer Instruction Manual
- June 3, 2024
- ARESA
Table of Contents
ARESA AR-2304 Garment Steamer
ITEM DESCRIPTION
- Safety stand
- Water filling inlet
- Water tank
- Thermostat
- Steam regulator
- Indicator light.
- Steam shot
- Hanging loop.
- Power cord.
- Soleplate.
- Release button
- Cloth brush
- Hair removal brush
- Measuring cup
SET
- Garment steamer – 1
- Cloth brush – 1
- Warranty card – 1
- Instruction manual – 1
- Gift box – 1
- Hair removal brush -1
- Safety stand – 1
- Measuring cup – 1
| Please read this instruction manual carefully before using the appliance.
Save the instruction manual as you may require it in future
Use the garment steamer for smoothing clothes, removing wrinkles with the help
of stream
---|---
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE ONLY
After unit transportation or storage at low temperature it is necessary to
keep it for at least 4 hours at room temperature before switching on
TECHNICAL SPECIFICATIONS
Supply voltage: 220-240 V ~ 50 Hz
Power consumption: 800-1000 W
Water tank volume – 90 ml
Warranty period in the European Union – twenty four months
IMPORTANT SAFEGUARDS
- Read this manual carefully before operating the steamer to avoid damage during use.Incorrect handling can lead to damage of the product and to the health of the user.
- Before the first use make sure that the product specifications match the mains supply.
- The steamer is not intended for use by persons (including children) with reduced physical, sensory or mental ability, or lack of experience or knowledge, if they are not controlled or notinstructed on the use of the device by the person responsible for their safety.
- Do not leave unattended the device in operation or still hot, especially if there are children near it.
- Avoid contact with the hot surface of the steam iron and the power cord of the steamer. Do not put pencils or otherItems in the steamer holes of the steamer.
- Do not use the steamer if the cord or plug is damaged, or if the appliance itself is damaged or defective. In case of problems, take the steamer to the service center. Do not repair the appliance yourself.
- If the power cord is damaged, it must be replaced by the manufacturer, after-sales service or any qualified personnel.
- Do not allow the power cord to touch sharp edges.
- Always unplug the steamer when not in use.
- Do not use the steamer without water. When using the steamer, monitor the water level in the tank.
- Always unplug the steamer from the mains before filling or draining the water tank.
- Fill the tank only with distilled (non-mineral) water. Never fill with liquids, such as Detergent, gasoline, vinegar, and the like.
- While using do not direct the steam iron toward humans or animals.
- Do not place the steamer near open flames, ovens, or other heaters.
- Do not use accessories that are not included in the set.
- Do not use the steamer outdoors or in humid conditions, especially near bath, shower or swimming pool. To prevent electric shock, do not operate the steamer with wet hands.
- To reduce the risk of electric shock, do not immerse the steamer, plug, cord in water or other liquids.
- To avoid burns do not install accessories during use.
- Do not steam directly on people.
- When disconnecting the steamer from the mains, hold the plug with hand, do not pull on the power cord. Do not twist and do not wind the cord around the device.
- Make sure that the device is cooled before storing it.
- Do not use the steamer for purposes not specified in the instructions. To prevent accidents, do not cover the steamer!
- Use the steamer only for domestic purposes in accordance with this Operation Manual. The steamer is not suitable for industrial or commercial use. Guarantee does not apply on faults caused by the use of products for purposes that go beyond personal domestic needs (ie for industrial or commercial purposes).
OPERATION
Before the first use make sure that the soleplate of the device is not dirty,
the water tank is clean, the temperature control knob is moved to “Off”
position. Before the first use a light smell may appear, this is normal and
will disappear soon. Make sure that the steamer is disconnected from the mains
supply. Open the filler cap and fill in the water tank. Use distilled (not
mineral), bottled or filtered water. Do not pour hot water into the water
tank. Close the filler cap. Before using the steamer check the tags on the
clothes.
– Synthetics (acrylic, viscose, polyester, etc.)
● – silk ●● – wool ●●● – cotton, linen.
Plug the device to the mains supply. Turn the temperature control knob to the
necessary position. Steamer will be ready to work after the indicator light
turns off. The indicator will turn on and off from time to time, which ensures
that the chosen heating temperature is maintained. Hold the device upright.
Attention: the device does not have the function of constant steam. Steam is
released only when the corresponding button is pressed. A powerful steam shot
will help you to remove stiff creases.
Attention: It is not recommended to use “Steam shot” function when the item is
heating (when the corresponding indicator is on). Continue steaming after the
heat indicator turns off.
After use empty the water tank and wipe the unit dry.
Avoid contact of steam with open parts of the body.
Do not install accessories during the release of steam to avoid burns! Do not
use the appliance without water!
CLEANING, TRANSPORTATION AND STORAGE
TRANSPORTATION. Transport the device by any kind of enclosed transport
observing the rules which ensure preservation of market condition of both the
product and packaging, and its further safe operation.
CLEANING. Before cleaning the steamer it is necessary to remove the plug
from the outlet and cool it for at least 30 minutes.
ATTENTION! Never wash parts of the appliance in the dishwasher. Do not
use chemicals or abrasives.
It is recommended to clean the steamer at least once a month. Follow the below
instructions:
– fill the water tank with water;
– hold the device in a vertical position;
– set the temperature control knob to the maximum position and connect the
device to the mains;
– Wait until the device reaches the operating temperature (the heating
indicator should turn off);
– disconnect the appliance from the mains;
– hold the device in a horizontal position above the sink and lightly move it
back and forth;
– Water and steam will flow through the holes on the soleplate together with
mud and scale.
STORAGE. The device must be stored indoors, in conditions that presume
its further safe operation. Make sure that the appliance and all its
accessories are completely dried before storing it. Always store the iron in
an upright position.
RECYCLING
The appliance and packing materials must be disposed with the least harm to the environment and in accordance with the rules for waste disposal in your area.
WARRANTY TERMS
When purchasing the product, ask for it to be checked in your presence.
Without having a warranty card or when it is not properly filled in, the
quality claims are not accepted, and no warranty repair is performed. The
warranty card should be presented at any address to the service center during
the whole warranty period. The product is accepted for service in a complete
set only. The warranty period is calculated from the moment of sale to the
buyer. Keep the documents confirming the date of purchase of the product (cash
receipt).
The condition of free warranty service of your product is its correct
operation, which does not go beyond personal domestic needs, in accordance
with the requirements of the operating instructions for the product, the
absence of mechanical damages and the consequences of careless handling of the
product.
The product is accepted for warranty service in its pure form. The warranty
covers all manufacturing and construction defects (except those listed in the
“Warranty does not apply” section), identified during the warranty period.
During this period defective parts, except consumables, are subject to free
replacement in the warranty service center.
THE GUARANTEE DOES NOT COVER
- Defects caused by force majeure.
- Damage to the product caused by the use of the product for purposes that go beyond personal domestic needs (ie industrial or commercial purposes).
- Consumables and accessories (sections, etc.).
- Defects caused by overloading, improper operation, penetration of liquids, dust of insects, ingress of foreign objects into the product.
- Products that have been repaired outside authorized service centers or warranty workshops.
- Damage resulting from changes in the design of the product by the user or unqualified replacement of his components.
- Mechanical damages, including due to negligent handling, improper transportation and storage, falling of the product.
- Violation of the operating instructions.
- Incorrect installation of mains voltage (if required).
- Making technical changes.
- Damage through the fault of animals (including rodents and insects).
| Information on the production date can be found on a separate package. For
warranty service, please contact your nearest service center.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>