Philips Hue 555334 Bluetooth Smart Lightstrip installation manual
- June 3, 2024
- Philips Hue
Table of Contents
Philips Hue 555334 Bluetooth Smart Lightstrip
Specification
- COLOR: White
- BRAND: Philips Hue
- INDOOR/OUTDOOR USAGE: Indoor
- SPECIAL FEATURE: Corded
- LIGHT SOURCE TYPE: LED
- POWER SOURCE: AC
- LIGHT COLOR: White
- STYLE: Single Color
- MATERIAL: Acrylic
- CONTROLLER TYPE: App Control, Voice Control
- CONNECTIVITY PROTOCOL: Bluetooth, Zigbee
- NUMBER OF LIGHT SOURCES: 50
- VOLTAGE: 120 Volts
- WATTAGE: 10 watts
- ITEM WEIGHT: 1 Pounds
- NUMBER OF ITEMS: 1
- ITEM DIMENSIONS LXWXH: 3 x 8.3 x 2 inches
- CONTROL METHOD: Remote
Introduction
Any voice or Smart Home assistant can be used to pair with your Philips Hue White and Color Bluetooth Lightstrip Plus. Works with Alexa (Alexa device required; also compatible with Google Assistant, Apple Homekit, Microsoft Cortana, SmartThings, and IFTT). These Bluetooth-enabled smart lightstrips are easy to connect. One Hue Hub can be used to control up to 50 smart lights without clogging your Wi-Fi network. With the sticky tape included, affix the flexible Bluetooth LightStrip behind bars, beds, or cabinets. Utilize the provided cut markings to cut it to the ideal size. 32 feet of extension can be connected to each base kit. For a more aesthetically pleasant Smart Home, the coating around the Lightstrip contributes to the creation of a single, bright, and lively colored light over the full strip. Your Hue lightstrip plus is syncedwith Gaming, Music and Movies using your PC via the Hue Sync app.
IMPORTANT SAFETY INSTRUCTIONS
Product appearance may vary from image shown.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
DANGER – RISK OF SHOCK – DISCONNECT POWER BEFORE INSTALLATION.
TIPS
HOW TO INSTALL
- CONNECTING TO THE ADAPTER
- ATTACHING THE STRIPLIGHT
- CUT
- REMOVE
- RE-USE
- CLEANING THE WALL
- PLACING THE STRIPLIGHT
- CONNECTING THE ADAPTER
- CONNECTING THE PLUG
- WRAPPING THE WIRE
**INSTALLATION INSTRUCTIONS
**
INSTALLING THE APP
FAQs
Is the power brick bivolt? (110v and 220v) or is it only 110v?
The power brick reads on mine 110-220v.
Will these work with a splitter to light two strips from one controller?
Yes, but if the LEDs would total more than 20 watts the result may be better using a 5 channel LED amplifier and a 24v power supply of appropriate size. At power-on the Philips control detects if the power draw will exceed the power supply’s capacity and re-scales the output dimmer so that 100% brightness in the app or at the bridge is within the capability of the power supply.
Attach to the back of ultra-thin tv (lg oled)? will it get very hot?
They barely gets warm. The power supply delivers a little over 19W and the maximum delivered to LED strips is around 16W at no more than 8W/meter. Even using double this density single row RGBCCT LED strips with a 5ch LED amplifier and a separate 24V DC power supply you won’t get warmer than the TV itself does. If you used 100LED/m 5-in-1 dual row led strips that would deliver closer to 100W and you would want to put the strips on extrusions and mount the clips on standoffs. That would also put so much light back there you would have to dim them below 25% to watch TV.
Can I adhere this to a piece of furniture that is pushed up against a wall (light strip would be between wood and wall with no space)?
Yes, but the LEDs are face emitting not edge emitting, so depending on the exact details the result may cover the LEDs well enough to make turning them on a distinction without a difference. There are led strip channels available to hold the strip at 45° (V channel) or 90° (Up-down channel).
I plan on sticking it to the back of my tv for ambient lighting. if I were to remove it later in the future, is any adhesive residue left behind?
Yes. Use Goo-gone.
What is the lifespan of the strips? In other words, how many hours are these expected to last?
The PWM control’s MTBF should be around 20y, 24v power supply is probably closer to 10,000 hours, but it’s replaceable and low cost 3rd party replacements are easy to find. The LEDs themselves use phosphors that will begin to degrade noticeably after around 12,000 to 15,000 hours at 100% brightness. The LED strips themselves are replaceable and 3rd party components are easily found (look for RGBCCT led strips). The only unique component is the control box, which thankfully does have a long expected operating life.
So to use this lightstrip all I need is the Hue hub and app?
You can use the hue lights via Bluetooth without the Hue Bridge. You won’t be able to control your lights when away, but they work without the bridge. You also cannot use them with Alexa unless you have a bridge.
I can see in the main photo of this listing there is a hue bridge. when I purchase this light strip, will I also receive the Philips hue bridge?
Yes – the whole thing is very easy and self-explanatory. Toughest part is removing the backing tape to the adhesive w/o removing the tape itself. Go slow.
can it change to multiple colors at the same time?
It depends which model you are asking about. The gradient lights are capable of emitting multiple colors simultaneously. The model that this question is listed under is the Gradient Lightstrip 80inch base with the 40inch extension.
does this light strip work with razer? The razer app mentions a bridge.
Yes, it does. Sync your Hue Bridge to Razer Synapse and you can select any hue lights using that bridge to work with Razer Synapse. All the same options you’ve come to expect with your razer peripherals are available to the hue lights you’ve selected, including syncing with videogames. Just be sure if you want to sync to external media, like videogames, you download the associated razer app. So, as an example, to sync to Overwatch, there’s a separate overwatch add-on you download thru Razer which enables it. It’s actually really cool and works surprising well.
Is there a longer power cable for these lights or can you get a second power cord and hook the two together and still have the lights work?
Not sure, I think I’ve seen aftermarket providers with longer cables for these lights.
Is it normal that the extension strip displaying a different color than the main strip?
it shouldn’t be different, make sure you have the good version V3 or V4 (different connector) or also make sure your connector is connected properly.
Does Hue (or any 3rd parties) make a jumper/connector cable that allows you to bridge a gap where you don’t want lights?
You can but adapters on Amazon that’ll tie or extend strips.
Does this support Zigbee?
not that I’m aware… It does support Bluetooth.
What’s different between Bluetooth vs non Bluetooth?
The Bluetooth doesn’t require the Hub which can control all the lights at once in all combinations and colors. The hub also allows the lights to have many other features. Go to the Hue website for explanations.
Could these function as suitable lighting for a work bench? currently have a fluorescent light
No. These are more of accent or ambient lighting.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>