Boruiya CBST0292 Power Indicator Lights Instructions
- May 15, 2024
- Boruiya
Table of Contents
Boruiya CBST0292 Power Indicator Lights
Instructions
Power indicator lights up when power is applied (warm light).
Power supply : Input: ac 100-240 V 50/60 Hz from adapter; dc 12V 3A
Output: 5W/7.5W/10W (5V1A7.5V1A/9V1.1A)
Wireless charging area, after the unit is powered on, the wireless charging device can be charged by placing it in the area.
LED light control button, adjustable light color: click to turn on the light (indicator light on), click again to switch the color (natural light, cold light, warm light, total of 3 colors), click again to turn off the light (indicator light off); long press to adjust the brightness of the light.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
The FCC certification of this device refers to RF exposure testing performed
in typical operating conditions, where a person is no closer than 20
centimeters from the device surface at all times, except for non-repetitive
patterns with transient time intervals in the order of a second. Only in the
stated conditions, the device is shown to fully comply with the FCC RF
Exposure requirements of KDB 447498.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>