AT T PDCU36 36W High Speed Ultra Slim Charger with Type C Cable User Guide
- June 3, 2024
- AT&T
Table of Contents
AT T PDCU36 36W High Speed Ultra Slim Charger with Type C Cable
Dimension: 317mm(W) x 48mm(H)
Printed on both sides (white gloss paper, 1 00g)
PDCU36 36W Ultra Slim Adaptor With Type C Cable
www.att.com/electronics
© 2022 Concept 101 LLC. All Rights Reserved. AT&T and the AT&T logo are
trademarks of AT&T Intellectual Property licensed to Concept 101 LLC, New
York, New York 10018. Printed in China. Issue 1.0 AT&T 08/2022.
licensed to Concept 101 LLC, New York, New York 10018. Printed in China. Issue
1.0 AT&T 08/2022.
Other trademarks and trade names are those of their respective owners.
Welcome
Thank you for purchasing AT&T PDCU36 !
Please read this quick start guide before using the device to ensure safe and
proper use.
Features
- Designed to charge smartphones and other accessories.
- 36W (PD 3.0 PPS) Quick Charge™.
- GaN Technology uses less power and produces less heat.
- Ultra slim, compact and fold-away design.
- Includes 3-ft. long Type C to Type C 3A cable.
Product Appearance
- PD Type C Output
- Input Plug
- Type C to Type C 3A Cable
Operation instructions
Plug into an alternating current AC 100-240V outlet to provide power to charger.
This power adapter is designed for use with an AC 100-240V constant
alternation current.
Higher or lower voltage is unsuitable for this unit.
Use above 3A current charging cable.
Specifications
- Model No. PDCU36
- Input AC 100-240V 50/60Hz 1.0A
- PD Output 5V 3A, 9V 3A, 12V 3A, 15V 2.4A, 20V 1.8A PPS: 3.3-11V 3A 3.3-16V 2A
- Dimensions 2.58″x1.63″x0.5″
- Weight 0.13 lbs
LIMITED WARRANTY
The Al&l brands are used under license. Any repair, replacement, or warranty service, and all questions about this product should be directed to Concept 101 LLC at www.att.com/electronics or call 1(888) 920-8680 from the USA or Canada. Concept 101 LLC warrants that the product will be free from defects in material, parts and workmanship for the period of one (1) year from date of purchase. Concept 101 LLC agrees that it will, at its option, replace the defective product with either a new or remanufactured product equivalent to your original purchase during the warranty period. Please be advised the returned product must carry the proof of purchase.
Exclusions and limitations
Concept 101 LLC does not warrant that the product will work properly in all environmental conditions, and makes no warranty and representation, either implied or expressed, with respect to the qulity, performance, merchantability, or fitness for a particular purpose other than the purpose identified within this user’s manual. Concept 101 LLC has made every effort to ensure that this users manual is accurate and disclaims liablity for any inaccuracies or omissions that may have occurred. Information in this user’s manual is subject to change Without notice and does not representa Commitment on the part of Concept 101 LLC. Concept 101 LLC reserves the right to make improvements to this user’s manual and/or to the products described in this user’s manual at any time without notice. If you find information in this quick start guide that is incorrect, misleading, or incomplete, please contact us through our website.
Compliance with FCC Regulations
The equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / television technician for assistance
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>