Inglesina Huggy Multifix Infant Car Seat Instruction Manual

Inglesina Huggy Multifix Infant Car Seat

HUGGY MULTIFIX CAR SEAT

• “UNIVERSAL” Category.
• The Huggy Multifix car seat is fastened on board of the car using a 3- point safety belt.

HUGGY MULTIFIX CAR SEAT + HUGGY SHP BASE

• “UNIVERSAL” Category.
• The Huggy SHP base is fastened using the 3-point safety belt and remains on board.
• The Huggy Multifix car seat is hooked to the Huggy SHP base and is fastened using the 3-point safety belt.
• Refer to the instruction manual of the Huggy SHP base for the correct installation procedure on the car.

HUGGY MULTIFIX CAR SEAT + HUGGY ISOFIX BASE

• “SEMI-UNIVERSAL” Category Class E.
• The Huggy Isofix base is fastened to the Isofix anchoring points present between the seat and the backrest of the car seat, and remains on board.
• The Huggy Multifix car seat is hooked to the Huggy Isofix base.
• Refer to the instruction manual of the Huggy Isofix base for the correct installation procedure on the car.

SAFETY WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY JEOPARDIZE THE SAFETY OF YOUR CHILD. YOUR CHILD’S SAFETY IS YOUR RESPONSIBILITY. CAUTION! NEVER LEAVE THE CHILD UNATTENDED: IT MAY BE DANGEROUS. PAY UTMOST CARE WHEN USING THE PRODUCT.

SAFETY

THIS SEAT DOES NOT GUARANTEE PROTECTION FROM INJURY IN ALL SITUATIONS. HOWEVER, USING IT APPROPRIATELY CAN REDUCE INJURY AND PREVENT DEATH.

Read carefully and understand how to use the product before using it. Pay utmost care to the highlighted warnings. Keep the instruction manual always together with the seat unit; in the rear part, there is a suitable storage area where this manual can be stored.

IMPORTANT:
The Huggy Multifix car seat is a restrain system homologated according to the Regulation ECE 44/04 for children weighing up to 13 kg (group 0+); when used alone or with the Huggy SHP base, it is classified as UNIVERSAL restrain system. When used with the Huggy Isofix base, it is classified as SEMI- UNIVERSAL restrain system – class Isofix E (ISO/R1: CRS Rearward facing infant).

Do not use the seat for children heavier than 13 Kg or where the child’s shoulders go beyond the upper slots of the straps. The Huggy Multifix seat is suitable for general in-vehicle use and is compatible with most, but not all, seat types. The use of the Huggy Multifix car seat on board of cars alone or together with the Huggy SHP base, is forecast only on vehicles equipped with 3-point safety belts with belt coiler, homologated according to the Regulation UN/ECE No.16 or other equivalent standards. Check on the car manual in which positions it is possible to install the seat unit. In case of doubt, contact the Manufacturer or authorized Retailer immediately.

In case of use of the Huggy Multifix car seat together with the Huggy Isofix base, verify the car models and the suggested use positions on the enclosed list of cars. Verify the compatibility of the restrain system with the provisions contained in the use and maintenance manual of the car. RISK OF FALLING! The child’s movements may cause the child seat to slide about. Never place the seat on a raised surface (e.g. tables, worktops, beds, etc.).

RISK OF SUFFOCATION!
If placed on a soft surface the seat could overturn and suffocate the child. Never place it on beds, armchairs or other soft surfaces.

Do not use the Huggy Multifix car seat after 5 years from the date of production indicated on the product; due to the natural ageing of the materials, it might not be complying anymore with the regulations in force.

Do not use the Inglesina Huggy car system, if:

• it was subject to accident, even to a slight one. It may have been subject to invisible damages. The car system has to be replaced with a new one to assure the safety level.
• it is damaged, not equipped with the instruction manual, or any component is missing. Contact the Inglesina authorized Retailer or Customer Care Service immediately.
• if it is second-hand. There could be extremely dangerous structural damage.

Verify the correct hooking of all components of the Inglesina Huggy car system before each travel and/or when the vehicle is subject to periodical checks, maintenance, and cleaning. Other people may have tampered with and/or unhooked the Inglesina Huggy car system and may not have repositioned the same properly pursuant to the instructions. Avoid inserting fingers inside mechanisms.

Premature babies:
Born after less than 37 weeks’ pregnancy may be at risk in the child seat. They may have respiratory problems when sat in the child car seat. Consult your Doctor or hospital personnel to obtain information on the most suitable car seat/pram for your child before leaving the hospital.

SAFETY BELTS

WARNING!
Always secure the child with the safety straps provided (also when carrying by hand).

When the seat is occupied by very small children use a reducer so that straps can be adjusted to suit the child’s body. RISK OF STRANGULATION! If the straps are very loose the child could be strangled. Never leave the child in the seat if straps are loose or unfastened. The child’s clothing should not interfere with safety straps or buckles. If coupling/decoupling the car seat onto/from the stroller/frame with the baby inside the seat always make sure the belts are safely fastened. Bear in mind that doing these tasks with the baby in the seat can be more cumbersome and awkward. When placing the car seat onto the stroller/frame or removing it, always check that the baby or his/her garments do not get entangled.

USE AND INSTALLATION
CORRECT USE AND INSTALLATION CAN BE A MATTER OF LIFE AND DEATH. THE CHILD SEAT MUST BE INSTALLED IN STRICT COMPLIANCE WITH THE INSTRUCTIONS PROVIDED. FAILURE TO OBSERVE INSTRUCTIONS /WARNINGS CAN SERIOUSLY COMPROMISE YOUR CHILD’S SAFETY.

Before assembling, verify that the product and all its components have not been subject to damages during transport. Should this be the case, do not use the product and keep it out of reach of children. Before using the product, for the safety of your child, remove and eliminate all plastic bags and elements belonging to the packaging and, in any case, keep the same out of reach of newborns and children. Do not use the product, unless all its components are properly fastened and adjusted.

Assembly, disassembly and adjustment operations must be carried out only by adults. Make sure that the person using the product (baby-sitter, grandparents, etc.) are aware of the correct operation of the same. Check that all devices that attach/tighten the seat to the frame/car/base/stroller (and vice versa) are secured correctly before and during use. When the seat unit is used as a Travel System, use only with Inglesina frames or strollers, always verifying its proper hooking. When the stroller is used, mount the seat unit only in the position facing the mum. The Huggy Multifix car seat complies also with the EN12790 standard; therefore, it can be used as a household rocking chair.

USE OF THE HUGGY MULTIFIX CAR SEAT ON BOARD OF CARS

Do not use the child seat in positions or configurations other than those illustrated in this handbook.

CAUTION!
Install the Inglesina Huggy car system ONLY IN THE OPPOSITE DIRECTION TO THE DRIVING ONE. Never install it on seats positioned in opposite direction or transversely to the ordinary vehicle driving direction.

HAZARD!
The use of the Inglesina Huggy car system IS NOT ALLOWED ON SEATS EQUIPPED WITH FRONT AIRBAG! Make sure that reclining seats are blocked in vertical position pursuant to the instruction of the car’s manufacturer. During your journey, refrain from leaving unattended objects or bags in the car: make sure that they are stored securely as, in the event of an accident, they can cause injury. When using the Huggy Multifix car seat together with the Huggy SHP or Huggy Isofix base, before installing it, read the dedicated instructions carefully. When using the Huggy SHP and Multifix car seats alone or together with the Huggy SHP base, do not hook the seat units and/or base to the car using other belt crossings than those indicated in these instructions. The crossing/anchoring points of safety belts are highlighted by proper indications in light blue colour.

Check that all straps are always fastened and tensioned properly. Periodically check child seat straps for proper retaining performance.

• During your journey, all car occupants must wear a safety belt, in compliance with the law in force in the country of use: in case of accident, they may unintentionally injure the child, even if the seat is used properly.
• Never remove the child from the seat unit when the vehicle is moving; in case of need, stop as soon as possible in a safe place.
• Check that the car seat longitudinal axis is always parallel to the direction of drive.
• During your journey, refrain from leaving unattended objects or bags in the car: make sure that they are stored securely as, in the event of an accident, they can cause injury.
• Check that straps with buckles are not twisted and are not trapped in the car door or the mobile parts of the car seat. Safe and appropriate driving behaviour is recommended: the child car seat is an effective restrain system but is not, on its own, sufficient to avoid severe injury in the event of a violent car crash. Please bear in mind that accidents, even those which occur at low speed, can be extremely dangerous for all car passengers.
• Always keep the child seat fastened to the passenger seat, even when the former is empty.
• When vehicle is fully occupied lighter passengers should sit in the rear and heavier ones in the front.
• Car interiors can become very hot if the vehicle is left in direct sunlight. Cover the child seat with a towel when it is not in use to prevent its components from overheating.
• During long journeys take frequent breaks as the child will tire easily.

USE OF THE HUGGY MULTIFIX CAR SEAT ON INGLESINA FRAMES AND STROLLERS

• Use exclusively together with frames and strollers by Inglesina specifically arranged and equipped with Easy Clip hooking system. In case of doubt, visit the website inglesina.com or refer to an Authorized Retailer or to the Inglesina
• Customer Care Service.
• Read the instructions concerning the use of the frame/stroller carefully, when attaching the carrycot/seat unit/car seat.
• Never place the product close to stairs or steps.
• Use only on a flat, stable and dry surface.
• Do not leave the stroller/pram on a slope when the child is seated in it, even if the brake is engaged. Brake efficiency is limited on high gradients.
• Do not use stairs or escalators when the child is in the stroller/car seat/carrycot.
• Do not open, close or disassemble the product with the baby positioned in the same.
• In any case, be particularly careful when performing these tasks with the child nearby.
• Do not leave the baby in the stroller/car seat/carrycot when travelling on other transport means.

USE OF HUGGY MULTIFIX AS HOUSEHOLD SEAT UNIT

• WARNING! This car seat is not intended for prolonged periods of sleeping.
• WARNING! This car seat does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed.
• WARNING! Never use when the baby can sit alone.

MANUFACTURER’S CONVENTIONAL WARRANTY

Do not use spare parts or accessories not supplied and/or in any case not approved by L’Inglesina Baby. Any damage caused by the use of accessories not supplied and/or not approved by L’Inglesina Baby, such as seats, bag hooks, rain protection cloths, platforms for strollers, etc. shall be excluded from our terms of warranty.

• Never modify and tamper with the mechanical components of the Huggy Multifix car seat; there is the risk that a safe hooking of the same cannot be assured thereafter.
• Any modification to the products relieves L’Inglesina Baby from any responsibility whatsoever.
• Do not remove any adhesive or sewed labels; this may jeopardize the compliance of the product with regulation requirements in force.
• Regularly inspect all safety devices to ensure perfect product functionality along the time. In case of problems and/or malfunctions of any kind do not use the product. In this event, contact an Authorized Retailer or Inglesina Customer
• Care Service promptly.
• L’Inglesina Baby S.p.A. declines all liability for any damages to property or people resulting from the improper and/or incorrect use of the product.
• In order to improve its products, L’Inglesina Baby S.p.A. reserves the right to update and/or modify any and all aesthetic-technical details without prior notice.
• Never use the child seat without the padding. This padding cannot be replaced with other paddings unapproved by the manufacturer as it is a system component.
• When acting on the mobile parts of the device always pay careful attention to your child’s safety.

HINTS FOR CLEANING AND MAINTAINING THE PRODUCT

• Never force any mechanisms or moving parts; in case of doubt, check the instruction first.
• Store the product in a dry place.
• Protect the product against atmospheric agents, water, rain or snow; moreover, continuous and prolonged exposure to sunlight may cause changes in the colour of many materials. Clean the plastic and metal parts with a wet cloth or with a mild detergent; do not use solvents, ammonia or benzine. Carefully dry metal parts after any contact with water in order to avoid the formation of rust.
• It is recommended to wash the lining separately from other items.
• Periodically revive the fabric parts using a soft brush for garments.
• Respect the washing regulations for the textile lining born on the suitable labels.
• Handwash in cold water
• Do not bleach
• Do not tumble dry
• Dry flat in shade
• Do not iron
• Do not dry clean
• Do not spin-dry

Dry the textile lining completely before using or storing it. To prevent formation of mildew, it is advisable to air the carrycot periodically. In detail, separate the textile lining from the structure and run a dry cloth over the bottom.

WARNING!
Never wash the straps; just wipe them with a cloth and a gentle detergent.

Description

HUGGY MULTIFIX CAR SEAT  fig. 1

• H1 Handle
• H2 Handle adjustment buttons
• H3 Belt release red button
• H4 Reducer
• H5 Hood
• H6 Rear belt guide
• H7 Rear release lever

HUGGY SHP BASE fig. 2

HUGGY ISOFIX BASE fig. 3

• I1 Red/green indicators for base hooking on the car seat
• I2 Isofix connectors
• I3 Release lever

ADJUSTMENT

HANDLE ADJUSTMENT

• fig. 4 To adjust the seat unit handle (H1), press simultaneously the two buttons (H2) and rotate it to the wished position. Make sure that the two buttons (H2) completely come out, after having arranged the handle to the proper position.
• fig. 5 The handle of the seat unit can be adjusted to 4 different positions:
  • a) transport
  • b) intermediate
  • c) stability
  • d) car

To obtain the ”car” configuration, rotate the handle to the most forward position.

ADJUSTMENT OF THE SAFETY BELTS

• fig. 6 Loosen the safety belts by pressing on the regulator (A) and simultaneously pull them towards the internal side of the seat unit. Place the child in the seat unit with the back and legs completely in contact with the seat unit.
• fig. 7 Verify that the safety belts are inserted in the eyelets at the height of the shoulders (B) or immediately above.
• fig. 8 If the position is not correct, extract the belts from the rear side of the seat unit and reinsert them in the second pair of eyelets; always use eyelets at the same height.
• fig. 9 Overlap the two ending parts (C) and insert them in the buckle (D) until hearing the blocking CLICK. Verify the correct closing by pulling the ends of the belts.
• fig. 10 Let the belts adhere to the child’s body, by pulling its end on the regulator (A). A finger should not pass between the belts and the child’s body. To loosen the same, see Fig. 6.
• fig. 11 To release the belts, press the red button (H3).

USE

USE OF THE REDUCER
fig. 12 The seat unit is equipped with a reducer (H4) to be used for children up to about 3 months of age. When the reducer is used, make sure that the belts are positioned in the lowest eyelets of the backrest.

USE OF THE HOOD
fig. 13 The seat unit is equipped with an adjustable hood (H5). To hook it, insert the end (E) in the proper opening (F) and let the fabric rear side adhere to the seat unit backrest. To adjust it, simply accompany it to the wished position. To remove the hood (H5), extract it firmly from the structure.

CAUTION:
The hood shall not be used to lift the seat unit: hazard of detachment.

CARE AND MAINTENANCE

It is recommended to remove the lining periodically to provide for its correct maintenance.

• fig. 14 Bring the handle (H1) to the most rear position; detach the lining from the structure by releasing the upper (G) and lower (H) hooks from their seats.
• fig. 15 Extract the protections from the belts.
• fig. 16 Extract the belts from the suitable eyelets and, then, remove the entire lining.

INSTALLATION

INSTALLATION ON BOARD WITHOUT BASE
Verify that on the seat of the car there are not any items that may hinder the correct leaning of the Huggy Multifix car seat. Verify that the backrest is in vertical position and the seat where the seat unit has to be installed is NOT EQUIPPED WITH FRONT AIRBAG.

Install the Inglesina car system only IN THE OPPOSITE DIRECTION TO THE DRIVING ONE.

• fig. 17 Rotate the handle (H1) to the most forward position. Make sure that the two buttons (H2) completely come out, after having arranged the handle to the proper position.
• fig. 18 Pass the lower segment (K) of the car safety belt through the lateral seats (I).
• fig. 19 Hook the car safety belt properly.
• fig. 20 Pass the diagonal segment (L) of the car safety belt through the rear guide (H6).

CAUTION:
Make sure that the safety belts are well stretched and not twisted. Only in this way it is possible to obtain the perfect anchoring of the Inglesina Huggy car system.

INSTALLATION ON BOARD WITH BASE
Verify that on the seat of the car there are not any items that may hinder the correct leaning of the car base to the seat. Verify that the backrest is in vertical position and the seat where the car base has to be installed is NOT EQUIPPED WITH FRONT AIRBAG.

HUGGY SHP BASE

Install the Huggy SHP base on board of the car referring to the dedicated manual.

• fig. 21 Hook the Huggy Multifix car seat to the Huggy SHP base only IN THE OPPOSITE DIRECTION TO THE DRIVING ONE, until hearing both CLICK sounds indicating the occurred hooking.
• CAUTION: make sure that the seat unit is properly hooked on both sides.
• fig. 22 Rotate the seat unit handle (H1) to the most forward position. Make sure that the two buttons (H2) completely come out, after having arranged the handle to the proper position.
• fig. 23 Pass the diagonal segment (L) of the car safety belt through the rear guide (H6).
• CAUTION: make sure that the safety belts are well stretched and not twisted. Only in this way it is possible to obtain the perfect anchoring of the Inglesina Huggy car system.

REMOVAL OF THE HUGGY SHP BASE
fig. 24 Rotate the seat unit handle (H1) to the vertical position. After having removed the diagonal segment of the safety belt from the rear guide (H6), act on the seat unit lever (H7) and simultaneously lift it from the Huggy SHP base by holding it by the handle.

HUGGY ISOFIX BASE

Install the Huggy Isofix base on board of the car referring to the dedicated manual.

• fig. 25 Install the Huggy Multifix car seat on the Huggy Isofix base until hearing on both sides the CLICK signalling the occurred hooking.
• fig. 26 The correct hooking of the Huggy Multifix car seat occurs when the proper indicators (I1) from RED become GREEN. Make sure that the seat is properly hooked, trying to lift it.
• CAUTION: if the base Isofix connectors (I2) are not duly hooked, the Inglesina Huggy car system does not allow the correct installation of the Huggy Multifix car seat on the base, as a consequence do not force the hooking.
• fig. 27 After having hooked the Huggy Multifix car seat on the base, press the two buttons (H2) simultaneously and rotate the handle of the seat to the most forward position. Make sure that the two buttons (H2) completely come out, after having arranged the handle to the proper position.
• fig. 28 Act on the release lever (I3) to release the first blocking device of the car base. Then, push the base with the seat against the car seat until it leans completely on the same.
• fig. 29 Verify once again that the Inglesina Huggy car system is properly hooked.

REMOVAL OF THE HUGGY ISOFIX BASE
fig. 30 Rotate the seat handle to the vertical position and, by acting on the rear lever (H7), lift it from the Huggy Isofix base by holding it from the handle.

USE WITH INGLESINA EASY CLIP FRAMES

• fig. 31 (COMFORT / OTUTTO / DOMINO frames).
• For the correct use of the Inglesina Easy Clip frames, refer to the dedicated manuals.
• fig. 32 Properly open the frame, following the suitable instructions. Holding the Huggy Multifix car seat by the handle, place it on the frame on the central pin making sure that the brakes are always properly engaged and that there is not any carrycot or seat unit installed. Then, push the seat unit downwards until hearing both CLICK sounds indicating the occurred hooking.
• CAUTION: always make sure that the seat unit is properly hooked before use.
• fig. 33 To remove the seat unit, act on the rear lever (H7) and simultaneously lift it holding it by the handle.

USE WITH INGLESINA EASY CLIP STROLLERS

• fig. 34 (ZIPPY STRIPTEASE/FREE – AVIO Strollers).
• For the correct use of the Inglesina Easy Clip strollers, refer to the dedicated manuals.
• In the versions with removable seat unit, it is possible to hook the seat unit directly on the frame, after having removed the backrest properly.
• Zippy ST/Free: remove the stabilizing supports and/or armrest top covers, if any, following the suitable instructions. Avio: hook the dedicated adapters, following the suitable instructions.
• fig. 35 Make sure that the brakes are properly engaged. Holding the Huggy Multifix car seat by the handle, hook it to the stroller on the central pin. Then, push the seat unit downwards until hearing both CLICK sounds indicating the occurred hooking.
• CAUTION: always make sure that the seat unit is properly hooked before use. Place the seat unit always facing the mum.
• fig. 36 To remove the seat unit, act on the rear lever (H7) and simultaneously lift it holding it by the handle.

REGISTER YOUR PRODUCT

Do it now, for your baby’s safety.

• It is an easy and fast operation, just visit the website inglesina.com to do it.
• To register the product is IMPORTANT because it provides us with the possibility to contact you for important information about safety and functionality of your product.

References

• Inglesina | There is a Story Inside

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>