LG CBIS3618BE Studio 36 Black Induction Cooktop Owner’s Manual

LG CBIS3618BE Studio 36 Black Induction Cooktop

Product Information

Specifications:

• Model: CBIS3618BE
• Brand: LG
• Type: Ceramic-Glass Induction Cooktop
• Power Source: Electric
• Cooking Zones: Dual Cooking Zone, Single Cooking Zones (various sizes), Flexible Cooking Zone

Product Usage Instructions

Installation

Before Installing:

• Installation and service must be performed by a qualified installer.
• Save the instructions for the local electrical inspector’s use.

Operation:

Introduction to Induction Cooking:

• Ensure compatible cookware is used for induction cooking.
• Place the cookware on the cooking zone and select the desired
  cooking setting on the control panel.

Care and Maintenance:

Cleaning:

• Use the provided Cooktop Cleaner and Non-scratch Scouring Pad
  for cleaning.

• Avoid using improper cleaning materials that may damage the
  cooktop surface.

FAQ (Frequently Asked Questions)

Q: Can I use any type of cookware on the induction cooktop?
A: No, only cookware compatible with induction cooking can be used. Refer to the user manual for guidelines on suitable cookware.

Q: How do I troubleshoot if the cooktop is not functioning?
A: Before calling for service, ensure the cooktop is properly connected to power and refer to the troubleshooting section of the manual for common issues and solutions.

en-us_main.book.book Page 1 Tuesday, October 17, 2023 9:53 AM

Scan to see the online manual.

OWNER’S MANUAL

CERAMIC-GLASS INDUCTION COOKTOP
Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times.
ENGLISH CBIS3618BE

MFL54169115 Rev.00_101723

www.lg.com
Copyright © 2022-2023 LG Electronics Inc. All Rights Reserved.

en-us_main.book.book Page 2 Tuesday, October 17, 2023 9:43 AM
2
TABLE OF CONTENTS
3 IMPORTANT SAFETY INSTRUCTIONS
3 READ ALL INSTRUCTIONS BEFORE USE 3 WARNING STATEMENTS 6 CAUTION STATEMENTS
8 PRODUCT OVERVIEW
8 Product Features
9 INSTALLATION
9 Before Installing 13 Installing the Cooktop
16 OPERATION
16 Introduction to Induction Cooking 16 Cookware 19 Control Panel
32 SMART FUNCTIONS
32 LG ThinQ Application
35 MAINTENANCE
35 Care and Cleaning
37 TROUBLESHOOTING
37 Before Calling for Service
40 LIMITED WARRANTY
40 USA 44 CANADA

ENGLISH

en-us_main.book.book Page 3 Tuesday, October 17, 2023 9:43 AM

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE
Safety Messages
Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages. Download this owner’s manual at http://www.lg.com
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION. These words mean: WARNING You may be killed or seriously injured if you do not follow instructions. CAUTION You may be injured or cause damage to the product if you do not follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what may happen if the instructions are not followed.
WARNING STATEMENTS
WARNING
· To reduce the risk of explosion, fire, death, electric shock, scalding or injury to persons when using this product, follow basic precautions, including the following:
Installation
· Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the National Electrical Code ANSI/NFPA No. 70, latest edition in the United States, and all local code requirements. Install only per installation instructions.
· The safety aspects of this appliance comply with accepted technical standards. · Never modify or alter the construction of an appliance such as removal of panels, wire covers or any
other permanent part of the product. · Remove all tape and packaging wrap before using the appliance. Destroy the carton and plastic bags
after unpacking the appliance. Never allow children to play with packaging material. · The installation and connection of the new appliance must only be carried out by qualified personnel.
Operation
· Know how to disconnect the electrical power to the appliance at the circuit breaker or fuse box in case of an emergency. Mark the breaker or fuse for ease of identification and swift action if necessary.
· Never use your appliance for warming or heating a room. · Persons with a pacemaker or similar medical device should exercise caution using or standing near an
induction unit while it is in operation, as the electromagnetic field may affect the working of the

en-us_main.book.book Page 4 Tuesday, October 17, 2023 9:43 AM
4 IMPORTANT SAFETY INSTRUCTIONS
pacemaker or similar medical device. It would be advisable to consult your doctor or the pacemaker or medical device manufacturer about your particular situation.
· DO NOT touch cooking zones or areas near these surfaces. Cooking zones may be hot from residual heat even though they are dark in color. Areas near the cooking zones may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials touch these areas until they have had sufficient time to cool.
· Never wear loose fitting or hanging garments while using this appliance.
· Always turn off all controls when cooking is completed.
· Do not use water or flour on grease fires. Smother the fire with a pan lid, or use baking soda or a dry chemical or foam-type extinguisher.
· Use only dry pot holders. Moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch hot surface units. Do not use a towel or other bulky cloth instead of a pot holder.
· Do not heat unopened food containers. A buildup of pressure may cause the container to burst and result in injury.
· Flammable materials should not be stored near or on the cooking surface. This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the appliance. Flammable materials may explode and result in fire or property damage.
· Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
· Never place combustible items on the cooktop.
· Never keep any combustible items or aerosol cans in a drawer located under the cooktop.
· When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed to become too hot.
· Overheated fats and oils catch fire quickly. You should supervise cooking when preparing foods in fat or oil.
· Use a deep fat thermometer, if possible, to prevent overheating fat beyond the smoking point.
· If the surface is cracked, switch off the appliance to avoid the possibility of electric shock. Do not reuse your cooktop until the glass surface has been replaced.
· When using the cooktop, never use aluminum foil, products wrapped in aluminum foil, or deep-frozen food in aluminum cookware.
· This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely.
· Young children should be supervised to ensure that they do not play with the appliance.
· Accessible parts may become hot during use. Young children should be kept away.
· Items of interest to children should not be stored in cabinets above a cooktop or on the backsplash of a cooktop ­ children climbing on the cooktop to reach items could be seriously injured.
· Children should not be left alone or unattended in the area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.
· Take care when plugging in electric appliances near the cooktop. Cords must not come into contact with the hot surface. Doing so could cause damage to the cooktop and cable insulation.
· After use, switch off the cooktop element by its control and do not rely on the pan detector.
· Avoid placing metal objects such as knives, forks, spoons and lids on the cooking surface areas. Metal objects can become hot and cause burns.
· Do not place any object on or near the display area in order to prevent accidental activation of the cooktop controls.
· Cookware handles should be turned inward and not extend over adjacent surface units. To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the cookware, the handles of cookware should be positioned so that they are turned inward, and do not extend over adjacent surface units.

ENGLISH

en-us_main.book.book Page 5 Tuesday, October 17, 2023 9:43 AM
IMPORTANT SAFETY INSTRUCTIONS 5
· Never leave prepared food on the cooking zones. Boilovers cause smoking and greasy spillovers that may ignite, or a pan that has boiled dry may melt or become damaged.
· Do not use aluminum foil to line any part of the cooktop. Only use aluminum foil as recommended after the cooking process, if used as a cover to be placed over the food. Any other use of aluminum foil may result in the risk of electric shock, fire or short circuit.
· Do not clean or operate a broken cooktop. If the cooktop breaks, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immediately.
· Never leave surface units unattended at high heat settings. Boilover causes smoking and greasy spillovers that may ignite.
· Always turn off all controls when cooking is completed. · Keep pets away from the product to avoid risk of fire or burns. Do not allow pets to climb on the product
even when it is not in operation. · Liquids such as water, coffee or tea are able to be overheated beyond the boiling point without
appearing to be boiling, due to surface tension of the liquid. Visible bubbling or boiling is not always present when the container is removed from the cooktop. This could result in very hot liquids suddenly boiling over when the container is disturbed or a spoon or other utensil is inserted into the liquid. To reduce the risk of injury to persons: – Do not overheat the liquid. – Stir the liquid both before and halfway through heating it. – Do not use straight-sided containers with narrow necks. – After heating, allow the container to stand on the cooktop for a short time before moving the
container. – Use extreme care when inserting a spoon or other utensil into the container after heating. · Do not use the cooktop as a work surface or storage space. · Do not operate the cooking zones with empty pots or pans. · Do not turn on the cooking zones with no pots or pans on the element. · The cooking process has to be supervised. A short term cooking process has to be supervised continuously. · The appliance must not be installed behind a decorative door in order to avoid overheating.
Maintenance
· Do not repair or replace any part of the appliance. All servicing should be done only by a qualified technician to avoid the risk of personal injury and damage to the appliance.
· Take care to avoid steam burns if using a wet sponge or cloth to wipe spills on a hot cooking area. · Wait for the cooktop to cool before using cooktop cleaners. Some cleaners can produce NOXIOUS
FUMES if applied to a hot surface. · If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard. · If your appliance malfunctions or fractures, switch off all cooking zones, and contact an LG Customer
Information Center for service. · Always keep the control panel clean and dry. Do not let liquids or grease remain on the cooktop display
area. Spilled or burnt-on foods can activate or deactivate the appliance. Clean the display area thoroughly to resume normal operation of the appliance. · Clean the appliance regularly to keep all parts free of grease that could catch fire. Exhaust fan ventilation hoods and grease filters should be kept clean. Do not allow grease to accumulate on the hood or filters. Greasy deposits in the fan could catch fire. Refer to the hood manufacturer’s instructions for cleaning.

en-us_main.book.book Page 6 Tuesday, October 17, 2023 9:43 AM
6 IMPORTANT SAFETY INSTRUCTIONS
CAUTION STATEMENTS
CAUTION
· To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following:
Operation
· This appliance may only be used for normal cooking and frying in the home. It is not designed for commercial or industrial purposes.
· Use proper pan sizes. This appliance is equipped with one or more surface units of different sizes. · Select cookware having flat bottoms large enough to cover the cooking zones. The pan detection
sensors will not allow the affected cooking zones to operate without a pan present. · Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed cookware are suitable
for rangetop service without breaking due to the sudden change in temperature. Check the manufacturer’s recommendations for cooktop use. · Do not place hot cookware on cold cooktop glass. This could cause the glass to break. · Do not slide pans across the cooktop surface. They may scratch the cooktop surface. · Do not let pans boil dry. This may cause permanent damage in the form of breakage, fusion, or marking that can affect the ceramic-glass cooktop. (This type of damage is not covered by your warranty.) · Cook meat and poultry thoroughly, meat to at least an INTERNAL temperature of 160 and poultry to at least an INTERNAL temperature of 180 . Cooking to these temperatures usually protects against foodborne illnesses. · Prior to using the cooktop for the first time, apply the recommended cooktop cleaning cream to the ceramic surface. Buff with a non-abrasive cloth or pad. This will make cleaning easier when the cooktop gets soiled from cooking. The special cooktop cleaning cream leaves a protective finish on the glass to help prevent scratches and abrasions. · Please be careful of the cooktop edges when moving pots and pans. · Ceramic glass is very tough, and impervious to sharp temperature changes, but is not unbreakable. It can be damaged if hard or sharp objects fall on it. · Be very cautious if using pots made of cast iron, or other pots with rough edges or burrs. Moving these can cause scratches on the glass. · Do not slide metal or glass across the cooktop surface. · Do not use cookware with any dirt buildup on the bottom. · Do not use cookware with rough or uneven bottoms. This cookware can mark and scratch the cooktop surface. · Do not use the glass cooktop surface as a cutting board. · The appliance is not intended to be operated by means of an external timer or separate remote-control system.
Maintenance
· Always switch off the appliance before cleaning. · For safety reasons, do not clean the appliance with a steam jet or high-pressure cleaner. · Clean the cooktop in accordance with the maintenance and cleaning instructions in this manual. · Do not use harsh abrasive cleaners or rough metal scrapers to clean the cooktop glass since they can
scratch the surface, which may result in shattering of the glass. · Clean the cooktop cautiously. Do not use sponges or cloth to wipe spills on a hot cooking area. Use a
proper metal scraper.

ENGLISH

en-us_main.book.book Page 7 Tuesday, October 17, 2023 9:43 AM
IMPORTANT SAFETY INSTRUCTIONS 7 · If sugar or a mixture containing sugar falls onto a hot cooking zone and melts, remove it with a metal
scraper immediately, while still hot. If left to cool down, it may damage the surface when removed. Use caution and wear an oven mitt to avoid burns. · Keep meltable objects or materials away from the ceramic glass surface, for example, plastic utensils, aluminum foil, or cooking wraps. If any materials or foodstuffs melt on the ceramic-glass surface, these should be cleaned up immediately. · Use oven mitts to avoid burns when using a metal scraper on a hot cooking zone. · Refer to the Maintenance section for proper cleaning and maintenance of the cooktop.
Disposal of Old Appliances
To protect the environment, it is important that worn-out appliances are disposed of in the correct manner. · The appliance must not be disposed of with household rubbish. · You can obtain information about collection dates or public refuse disposal sites from your local
government or waste collection service. · Before disposing of old appliances make them inoperable so they cannot be a source of danger. To do
this, have a qualified person disconnect the appliance from the house circuitry.
SAVE THESE INSTRUCTIONS

en-us_main.book.book Page 8 Tuesday, October 17, 2023 9:43 AM

PRODUCT OVERVIEW

Product Features
Parts and Features
Throughout this manual, features and appearance may vary from your model.

d Bolts (2 ea) e Type A Screws (2 ea)

)/(;,%/(,1’8&7,21

‘8$/,1’8&7,21

32:(5

,1’8&7,21 ,1’8&7,21

Parts and Features a Dual Cooking Zone
11″ / 7″ (280 mm / 178 mm)
b Single Cooking Zone 8 1/2″ x 7 1/8″ (216 mm x
180 mm)
c Single Cooking Zone 6″ (152 mm) d Single Cooking Zone 8 3/16″ (208 mm) e Flexible Cooking Zone 8 1/2″ x 14 3/16″ (216
mm x 360 mm)
f Control Panel g Rating Label Model and Serial Number Plate
Accessories
Cleaner
a Cooktop Cleaner (1 ea) b Non-scratch Scouring Pad (1 ea) c Retainer Brackets (2 ea)

en-us_main.book.book Page 9 Tuesday, October 17, 2023 9:43 AM

ENGLISH

INSTALLATION

Before Installing
Before You Begin
Installation and service must be performed by a qualified installer. Important: Save these instructions for the local electrical inspector’s use. Read and save these instructions for future reference. Read these instructions completely and carefully.
CAUTION · If storage is located under the cooktop, do not
use it to store flammable or heat-sensitive items such as detergents, aerosols, cleaners, water, food, or plastics.

Tools Needed

INSTALLATION 9

NOTE Installer: · Read all installation instructions before installing
the cooktop. · Remove all packing material before connecting
the electrical supply to the cooktop. · Observe all governing codes and ordinances. · Only certain cooktop models may be installed
over certain built-in electric oven models. · Be sure to leave these instructions with the
consumer.
NOTE Consumer: · Keep the owner’s manual and installation
instructions for future reference.
NOTE · This appliance must be properly grounded. · Damage caused by failure to follow these
instructions is not covered by the cooktop warranty.

a Pencil b Saber Saw c Phillips Screwdriver d Flat-Blade Screwdriver e Pliers f Tape Measure g Level h Drill i Safety Glasses j Gloves
Parts not Provided
a Junction Box b Wire Nuts c Strain Relief (Conduit Connector)

en-us_main.book.book Page 10 Tuesday, October 17, 2023 9:43 AM

10 INSTALLATION
Unpacking the Cooktop
1 Unpack and visually inspect the cooktop for
any damage or missing components.
2 Be sure the bottle of cleaner and conditioner
packed in the literature bag is left where the user can find it easily. It is important that the

ceramic-glass cooktop be pretreated before use. See Care and Cleaning.
Model and Serial Number Location
The model and serial numbers are located on a plate on the front side of the cooktop. Please record them in this guide; you will need them for warranty registration.

Technical Specifications

Models

Description

Electrical Specificatio ns

Connection voltage
Maximum connected power load

Cooktop Dimensions

Countertop Cutout Dimensions

Cooking Zones

Induction Cooktop

CBIS3618BE

240/208 VAC 60 Hz., 44.4 A / 41.6 A

10650 W / 8650 W

36 5/8″ (930 mm) (W) × 3 9/16″ (91 mm) (H) × 21 1/16″ (535 mm) (D)

Standard Installation 34 3/8″ (873 mm) (W) × 5 5/8″ (142 mm) (H) × 19 13/16″ (503 mm) (D)

Position

Size

Power (Level 9 / Boost)

Front Left

8 1/2″ x 7 1/8″ (216 mm x 180 mm)

1500/3000 W (208 V) 1850/3700 W (240 V)

Front Right

8 3/16″ (208 mm)

1500/3000 W (208 V) 1850/3700 W (240 V)

Rear Left

8 1/2″ x 7 1/8″ (216 mm x 180 mm)

1500/3000 W (208 V) 1850/3700 W (240 V)

Rear Right

6″ (152 mm)

1150/1450 W (208 V) 1400/1800 W (240 V)

Flex Left

8 1/2″ x 14 3/16″ (216 mm x 360 mm)

2700/3000 W (208 V) 3300/3700 W (240 V)

Center

11″ / 7″ (280 mm / 178 mm)

Inner Burner: 1500/3000 W (208 V) 1850/3700 W (240 V) Dual Burner: 3000/4900 W (208 V) 3700/6000 W (240 V)

NOTE · The maximum power of each cooking zone depends on the size and material of the cookware used.

ENGLISH

en-us_main.book.book Page 11 Tuesday, October 17, 2023 9:43 AM

INSTALLATION 11
Preparing the Installation Location
Important Installation Information
· All electric cooktops run off a single phase, three-wire or four-wire cable, 240/208 volt, 60 hertz, AC-only electrical supply with ground.
· Minimum distance between cooktop and overhead cabinetry is 30″ (762 mm). · Make sure the cabinets and wall coverings around the cooktop can withstand the temperatures (up to 93
[200 ]) generated by the cooktop.

Dimensions and Clearances

O

O

P
A F
E M

J

K

L

G C
B C
D

QR

H I

K

T

S

N U

a Do not obstruct these areas. b Right side c Radius: 3/8″ (10 mm) d 4 X 8 (102 mm x 203 mm) opening to route armored cable if panel is present. e Approximate location of junction box

–

Dimension/Clearance

A

Width of upper plate

B

Depth of upper plate

C

Distance from bottom of upper plate to bottom of conduit

D

Width of cooktop base

E

Depth of cooktop base

F

Distance from bottom of upper plate to bottom of cooktop base

36″ Cooktop 36 5/8″ (930 mm) 21 1/16″ (535 mm) 3 7/16″ (87 mm) 33 7/8″ (860 mm) 19 5/16″ (490 mm) 2 5/16″ (58 mm)

en-us_main.book.book Page 12 Tuesday, October 17, 2023 9:43 AM

12 INSTALLATION

–

Dimension/Clearance

36″ Cooktop

G

Height of conduit

1 1/8″ (29 mm)

H

Distance from side edge of cutout to side of counter

21 1/8″ (28 mm)

I

Width of cutout

234 3/8″ (873 mm) 134 1/2″ (876 mm)

J

Depth of cutout

219 13/16” (503 mm) 119 15/16” (506 mm)

K

Depth of bottom cabinets

24″ (610 mm)

L

Distance from front of counter to front edge of cutout

22 3/16″ (55 mm)

M

Distance from rear edge of cutout to nearest combustible surface

22 1/16″ (52 mm)

N

Height below cutout (Empty space is needed underneath the cooktop 25 5/8″ (142 mm)

for optimum performance.)

O

Depth of overhead cabinets

113 (330 mm)

P

Clearance from top of cooking surface to bottom of overhead cabinets 230″ (762 mm)

Q

Clearance from top of cooking surface to bottom of overhead cabinets 236 (914 mm)

R

Clearance from countertop to bottom of adjacent cabinets

218 (457 mm)

S

Distance from edge of cooktop to nearest combustible wall (either side 22″ (50 mm)

of unit)

T

Junction box (approximate location)

10 (254 mm)

U

Junction box (approximate location)

12 (305 mm)

All dimensions are stated in inches and millimeters (mm).
Allow 2 (50 mm) below the armored cable opening to clear the electric cable and allow space for installation of the junction box on the wall at the back of the cooktop.
Thickness of glass: 3/16″ (4 mm)

CAUTION
· To eliminate the risk of burns or fire by reaching over heated surfaces, cabinet storage space located above the cooktop should be avoided. If cabinet storage is provided, risk can be reduced by installing a range hood that projects horizontally a minimum of 5 (127 mm) beyond the face of the cabinets.
· It is very important to keep 3 5/16″ (84 mm) distance between the cooktop and a drawer or oven a underneath it.

5 5/8″ (142 mm) 3 5/16″ (84 mm)

en-us_main.book.book Page 13 Tuesday, October 17, 2023 9:43 AM

ENGLISH

Installing the Cooktop
Electrical Connections
Important Safety Instructions
· Be sure the cooktop is installed and grounded properly by a qualified installer or service technician.
· This cooktop must be electrically grounded in accordance with local codes or, in their absence, with the National Electrical Code ANSI/NFPA No. 70, latest edition in the United States.
WARNING · The electrical power to the cooktop must be shut
off while line connections are being made. Failure to do so could result in serious injury or death.
Providing the Electrical Connection
· Install the junction box under the cabinet and run 120/240 or 120/208 Volt, AC wire from the main circuit panel.
NOTE · DO NOT connect the wire to the circuit panel at
this time.
Electrical Requirements
Observe all governing codes and local ordinances
1 A 3-wire or 4-wire single-phase 120/240 or
120/208 Volt, 60 Hz AC-only electrical supply is required on a separate circuit fused on both sides of the line (time-delay fuse or circuit breaker is recommended). DO NOT fuse neutral. The fuse size must not exceed the circuit rating of the appliance specified on the nameplate.
2 36″ induction cooktop can consume up to
10650 W at 240 VAC. A 50 Amp circuit breaker with #8 AWG must be used.
WARNING · Do not use an extension cord with this
appliance. Doing so may result in a fire, electrical shock, or other personal injury.

INSTALLATION 13
NOTE · Wire sizes and connections must conform to the
fuse size and rating of the appliance in accordance with the National Electrical Code ANSI/NFPA No. 70, latest edition, and local codes and ordinances.
3 The appliance should be connected to the
fused disconnect (or circuit breaker) box through flexible armored or nonmetallic sheathed cable. The flexible armored cable extending from this appliance should be connected directly to the grounded junction box. The junction box should be located as shown in Dimensions and Clearances with as much slack as possible remaining in the cable between the box and the appliance, so it can be moved if servicing is ever necessary.
4 A suitable strain relief must be provided to
attach the flexible armored cable to the junction box.
Electrical Connection
Connect the flexible armored cable that extends from the surface unit to the junction box using a suitable strain relief at the point the armored cable enters the junction box. Then make the electrical connection as follows. Electrical ground is required on this appliance. This appliance is manufactured with a supply wire and a frame-connected green or bare copper grounding wire.
NOTE TO ELECTRICIAN: · The armored cable leads supplied with the
appliance are UL-listed for connection to larger gauge household wiring. The insulation of the leads is rated at temperatures much higher than the temperature rating of household wiring. The current-carrying capacity of the conductor wire is governed by the temperature rating of the insulation around the wire, rather than the wire gauge alone.
WARNING · DO NOT ground to a gas supply pipe. DO NOT
connect to electrical power supply until appliance is permanently grounded. Connect the ground wire before turning on the power.

en-us_main.book.book Page 14 Tuesday, October 17, 2023 9:43 AM

14 INSTALLATION
WARNING · This appliance is equipped with a copper
conductor flexible cable. If connection is made to aluminum house wiring, use only special connectors which are approved for joining copper and aluminum wires in accordance with the National Electrical Code and local codes and ordinances. Improper connection of aluminum house wiring to copper leads can result in a short circuit or fire. Follow the connector manufacturer’s recommended procedure closely.
Where Local Codes Permit Connecting the Appliance-Grounding Conductor to the Neutral (White) Wire
Observe all governing codes and local ordinances.
1 Disconnect the power supply.

b Cable from Cooktop
c White Wire (Neutral)
d Red Wires
e Green Wire (Ground)
f UL-listed Conduit Connector
g Black Wires
h Junction Box
If Cooktop is Used in a New Branch Circuit Installation (1996 NEC), Mobile Home, Recreational Vehicle, or where Local Codes Do Not Permit Grounding to the Neutral (White) Wire
Observe all governing codes and local ordinances.
1 Disconnect the power supply.

2 At the circuit breaker box, fuse box or junction
box, connect appliance and power supply cable wires as shown.
WARNING · You may not ground the cooktop through the
neutral (white) wire if cooktop is used in a new branch circuit installation (1996 NEC), mobile home, recreational vehicle, or where local codes do not permit grounding to the neutral (white) wire. When grounding to the neutral (white) wire is prohibited, you must use a 4-wire power supply cable. Failure to heed this warning may result in electrocution or other serious personal injury.
3-Wire Grounded Junction Box

2 At the circuit breaker box, fuse box or junction
box, connect appliance and power supply cable wires as shown.
WARNING · If connecting to a 4-wire power supply cable
electrical system, the appliance frame connected ground wire MUST NOT be connected to the neutral wire of the 4-wire electrical system.
4-Wire Grounded Junction Box

a Cable from Power Supply

a Cable from Power Supply b Cable from Cooktop c Ground Wire d Red Wires

ENGLISH

en-us_main.book.book Page 15 Tuesday, October 17, 2023 9:43 AM

e Green Wire (Ground) f UL-listed Conduit Connector g Black Wires h Junction Box i White Wire (No Connection)

INSTALLATION 15

Installing the Cooktop Unit
1 Visually inspect the cooktop for damage.
Make sure all cooktop screws are tight (see below for locations).

NOTE
· The retainer brackets MUST be installed to meet local codes or, in their absence, with the National Electrical Code ANSI/NFPA No. 70, latest edition.

a 3 Screws (Same Both Side) b 4 Screws (Same Both Side)
2 Check and prepare the installation location.
· See Dimensions and Clearances.
3 Carefully lower the cooktop into the
countertop cutout, making sure not to trap any wires.

a Cooktop b Countertop c Bolt d Retainer Brackets e Type A Screw
Final Check
Perform a final operational check of the cooktop, making sure the cooktop powers on properly and that each cooking zone operates correctly. Refer to the Operating Instructions in this guide for details.

NOTE · Do not use caulking compound. The cooktop
must be removable, should service be required.
4 Attach the retainer brackets a to the bottom
of the cooktop; then snug the bolts against the bottom of the countertop as shown.

en-us_main.book.book Page 16 Tuesday, October 17, 2023 9:43 AM

16 OPERATION
OPERATION
Introduction to Induction Cooking
How Induction Cooking Works
An induction coil beneath the ceramic glass cooking surface generates magnetic fields, which act directly on the base of the pots and pans.
Instead of heating the ceramic glass, this method heats the base of the pan immediately, saving time and energy. Since the heat required for cooking is generated directly in the base of the pan, the cooking zone itself warms up only slightly. The cooktop does become hot when heat is transferred from the cookware. IMPORTANT: · Electromagnetic fields can affect electronic
circuits and interfere with portable radios and phones. · Do not put magnetically active objects (e.g., credit cards, computer diskettes, cassettes) on or near the ceramic glass surface while one or more induction cooking zones are in use. · Do not put any metal objects (e.g., spoons, pan lids) on the cooking zones as they can become hot when the cooking zones are in use.
Cookware
Induction Cookware
NOTE · Before using the induction cooking elements,
carefully read and follow these cookware recommendations and the instructions in the pan sensing sections.
When purchasing pans for use on the induction cooktop, look for cookware identified by the manufacturer as “induction ready” or “induction capable”, or that is marked by the manufacturer as specifically designed for induction cooking. The base material of the cookware must be magnetic for the cooking elements to activate. Use

a magnet to check if the cookware base material is suitable. If the magnet sticks to the bottom of the cookware, the cookware can be used for induction cooking.
For the best possible surface cooking results, use only high-quality, heavy gauge steel cookware on the induction cooking elements. Follow manufacturer’s recommendations when using induction cookware.
Induction Cookware Types
The three most common induction cookware types available are stainless steel, cast iron, and porcelain-enamel-coated metals. · Stainless Steel is generally excellent for
induction cooking. It is durable, easy to clean, and resists staining.
NOTE · Not all stainless steel cookware is magnetic;
stainless steel is not always suitable for induction cooking.
· Cast iron cooks evenly and is also good for induction cooking. Do not slide cast iron cookware on the cooktop; cast iron cookware with a rough surface will scratch the ceramic cooktop.
· Porcelain-enamel-coated metals have variable heating characteristics depending on the quality of the base metal. Make sure the porcelainenamel coating is smooth to avoid scratching the ceramic cooktop.
Incompatible Cookware
· Aluminum, nickel-silver pots · Heat-resistant glass pots · Roasting pans · Stone pots · Stainless steel pots (without the IH mark)
IH mark
Induction
– Without the IH mark, heating may not work well.

en-us_main.book.book Page 17 Tuesday, October 17, 2023 9:43 AM

ENGLISH

· Pots with partially magnetic base – Even if there is an IH mark, a container that only has magnetic material on part of the bottom of the container may not be automatically detected or the product may not work properly.
a Material that sticks to the magnet b Material that does not stick to magnet · A pot with legs
· A pot with a round bottom – The smaller contact area may give poor results.
· Do not use a container with a flat bottom surface smaller than the burner size.

OPERATION 17
more noticeable if the contents of the pan are cold. As the pan heats up, the noise will decrease. The noise will also decrease if the power level setting is reduced.
NOTE · When using the induction cooktop, operational
noises are more noticeable while cooking in Boost mode. But very loud noises are not normal when induction cooking.
· The cooktop fan may turn on to reduce the temperature of the product, even when the surface elements are not being used.
· Cookware that is not marked “IH” may make a loud noise.
· Under certain conditions, your cookware may produce a high-pitched whistling noise when two elements are in use at the same time. The power levels at which this occurs may vary depending on the kind of cookware being used. Change the power level to eliminate the noise or reduce its volume.
Use Flat-Bottomed Cookware
Cookware must fully contact the surface of the cooking element. Use flat- bottomed pans sized to fit the cooking element and amount of food being prepared. Check for flatness by rotating a ruler across the bottom of the cookware.

Pan Preheat Recommendations
Induction cooking may decrease the amount of time required to preheat cookware compared to cooking on a radiant element cooktop or gas surface burner.
Pay close attention to all food items while cooking on the cooktop and until all cooking processes are complete.
CAUTION · Remember that induction surface cooking
initially heats the cookware VERY QUICKLY if the cookware does not contain food.
Noises during Cooktop Operation
The electronic processes involved with induction cooking may create some background noises. You may hear a slight buzzing sound when cooking on the cooktop. These noises are part of the induction cooking process and are considered normal.
Some cookware will buzz, depending on the construction or base material. The buzz may be

a Pan Size
Recommended Cookware Size

)/(;,%/(,1’8&7,21

‘8$/,1’8&7,21

32:(5

,1’8&7,21 ,1’8&7,21

a Dual
Cooking Zone

Pan size
Single: 5 13/16″ – 8″ (147 mm 203 mm) Dual: 9″ – 11″ (228 mm – 280 mm)

en-us_main.book.book Page 18 Tuesday, October 17, 2023 9:43 AM

18 OPERATION

Pan size

b Single
Cooking Zone

5 13/16″ – 7 1/8″ (147 mm – 180 mm)

c Single
Cooking Zone

5 13/16″ – 7 1/8″ (147 mm – 180 mm)

d Single
Cooking Zone

7 1/2″ – 8 11/16″ (190 mm – 220 mm)

e Flexible
Cooking Zone

4 3/4″ x 10 5/8″ (120 mm x 270 mm)

· The center area is a dual cooking zone which activates single or dual elements depending on pot/pan size. If the cooktop detects cookware that is less than 9″ in diameter, only the inner ring(single element) will activate. If it detects cookware larger than 9″ in diameter, it will activate both the inner and outer rings(dual element).
· To quickly boil a very large quantity of water, set the center element to Boost, use a pot that is at least 9″ in diameter so that the center dual element is activated, and turn off all other elements.

Minimum Cookware Size
· Use cookware with a bottom surface diameter of 5 13/16″ (147 mm) or greater.
· For flexible cooking zone, minimum cookware size is 4 3/4″ x 10 5/8″ (120 mm x 270 mm).

Cookware Placement
Use the proper cookware and place it correctly on the cooktop. One or more of the cooking elements will not heat if any of the incorrect conditions shown is detected by the sensors located below the ceramic cooktop surface. Correct the problem before attempting to use the cooktop.

Correct
· Cookware is centered correctly on surface of cooking element.

· Pan has flat bottom and straight sides.

· Pan size meets or exceeds the recommended minimum size for the cooking element.
· Pan rests completely on the cooktop surface.
· Pan is properly balanced.
Incorrect · Cookware is not centered on surface of cooking
element.
· Pan has curved or warped bottom or sides.
· Pan does not meet the minimum size required for the cooking element used.
· Pan bottom rests on cooktop trim or does not rest completely on the cooktop surface.
· Pan is unbalanced by heavy handle.
Cookware Placement in Flexible Cooking Zones

a Compatible

en-us_main.book.book Page 19 Tuesday, October 17, 2023 9:43 AM

ENGLISH

b Not compatible
Avoiding Scratches
Use heavier gauge stainless steel cookware on your ceramic cooktop surface. This will help reduce the possibility of developing scratches on the ceramic surface. Low-quality cookware can scratch the cooktop surface. Cookware should always be lifted over the ceramic cooktop surface to prevent scratching. Over time, sliding ANY type of cookware over the ceramic cooktop may alter the overall appearance of the cooktop. Eventually, the buildup of scratches can make cleaning the surface difficult and degrade the overall appearance of the cooktop. Scratches can also result from grains of sand (from washing vegetables) which are dragged with the pot across the cooking surface.
)/(;,%/(,1’8&7,21
For Best Results
Always follow the recommendations for proper cookware type and size. In addition: · Do not use dirty pans with grease buildup.
Always use pans that are easy to clean after cooking, and make sure that the bottoms of the pans are clean and dry. · When cooking with large amounts of liquid, use large pots so that nothing can boil over. · Do not let pans boil dry. This may cause permanent damage in the form of breakage, fusion, or marring that can affect the ceramic cooktop. (This type of damage is not covered by your warranty.) · Match the pan size and cooking zone to the amount of food being prepared.
Tips for Saving Energy
· Always position pots and pans before switching on the cooking zone.

OPERATION 19 b bottom not flat c handle too heavy · Dirty cooking zones and cookware use more electricity. · Whenever possible, place lids firmly on pots and pans so that they are completely covered.
· The base of the pot should be the same size as the cooking zone.
Control Panel
Control Panel Features
Locations of Surface Elements and Controls
The surface burner elements are positioned in the same locations on the cooktop and the control panel for ease of use.
Surface elements and controls POWER: Press and hold for 1 second to turn a the entire cooktop ON. When it is ON, the cooktop is in standby mode until a cooking zone is activated. Pause: Sets the active cooking zone to b minimum output. Press to activate or deactivate. c Clean Lock: Press to lock the control panel before cleaning it.

a not aligned

en-us_main.book.book Page 20 Tuesday, October 17, 2023 9:43 AM

20 OPERATION

Surface elements and controls
SETTINGS: Press to adjust settings. For a list
d of configurable settings, see “Operating
Instructions”.
e Kitchen Timer: Press to set a kitchen timer.
For details, see “Operating Instructions”.
Cooktop Control: To check the status of a
f cooking zone and adjust the cooking zone.
For details, see “Operating Instructions”.
To Set the Element Power Level
Select the number on the element power settings for the active cooking zone to adjust the power level from 1 to 9. If you’ve set 17 power levels in the SETTINGS menu, press the dots between the numbers to adjust the power level up or down half a step.

3 Set the correct time of day and choose
between a 12-hour or 24-hour time format. (The 12-hour format is not available in French.) Then press NEXT.

Hot Surface Indicator
Hot surface indicator
· If this icon is displayed on the screen, be careful because the ceramic glass surface is hot. – Failure to do so may result in burns or injuries.
· After turning off the burner, the icon is displayed continuously until the ceramic glass surface cools down. – If the temperature near the product is high, it may take longer for the ceramic glass surface to cool down.
· Even after the indicator light has turned off, be careful since the surface may still be hot.
Getting Started
The first time that power is supplied to the cooktop, the LG Studio logo is displayed for 1 second. After turning on the cooktop for the first time, adjust the settings to suit your preferences. To operate the control panel, press the pad firmly with the flat part of your fingertip.
1 Press POWER on the LCD display.

4 Read through the application guide in the
display and press DONE.
5 The Main screen appears in the display.
Changing Cooktop Settings
Settings
To adjust settings after the initial setup, press the display to open the main screen. Press SETTINGS at the bottom center of the main screen. Swipe the

2 After the startup animation, select the desired
language and press NEXT.

en-us_main.book.book Page 21 Tuesday, October 17, 2023 9:43 AM

ENGLISH

screen or press the “<, >” arrow keys to navigate through the settings screens.

OPERATION 21
4 When Lockout is turned on, the lock icon k
appears at the center bottom of the display.
Unlock
1 Press any part of the screen while Lockout is
on.

2 A popup screen appears. Press UNLOCK for 3
seconds.

3 The lock icon disappears from the bottom of
the display.
Clock
The time is displayed on the LCD display when the cooktop is turned on.
Setting Time of Day
1 Press SETTINGS at the center bottom of the
main screen.

Location of Settings · Page 1: Lockout, Clock, Wi-Fi, Brightness,
Power Levels, Language Selection · Page 2: Volume, Program Update, Factory
Data Reset, Open Source License
Lockout
The Lockout feature automatically prevents most cooktop controls from being turned on. It does not disable the clock or timer. · If Lockout is turned on, all cooktop functions are
disabled except the POWER button.
Lock
1 Press SETTINGS at the center bottom of the
main screen.
2 Press Lockout on the first Settings screen.

2 Press Clock, then set the correct hour and
minutes by scrolling. You can also press the
number pad icon < and enter the desired
numbers.
3 Select either a 12-hour or 24-hour clock mode
(12H/24H). The 12-hour mode is not available in French.
4 Press OK.
Wi-Fi
Connect the appliance to a home Wi-Fi network.
Setting Up Wi-Fi
1 Press SETTINGS at the center bottom of the
main screen, and then press Wi-Fi in the first settings screen.
2 Follow the instructions in the Wi-Fi Guide in
the display.

3 Press LOCK on the screen.

en-us_main.book.book Page 22 Tuesday, October 17, 2023 9:43 AM

22 OPERATION
3 Select ON, OFF, or RESET and press OK.
4 If ON is selected, the Wi-Fi icon f appears at
the bottom of the display.
5 If you select RESET, you will have to re-enter
the Wi-Fi password.
Brightness
Adjust the brightness of the LCD display from 20 % to 100 % in increments of 20 %.
Setting Display Brightness
1 Press SETTINGS at the center bottom of the
main screen, and press Brightness.
2 Adjust the display brightness by pressing and
dragging the dot across the bar, by tapping anywhere on the bar, or by pressing + or ­.
3 Press OK.
Power Levels
1 Press SETTINGS at the center bottom of the
main screen, and press Power Levels.
2 Choose between 17 levels and 9 levels. (the
output of each maximum level is the same).
3 Press OK.
Language Selection
Set the display language to English, Spanish, or French.
Selecting a Language
1 Press SETTINGS at the center bottom of the
main screen, and press Language Selection.
2 Select the desired language.

3 Press OK.
Volume
Adjust the volume of the cooktop controls.
Setting the Volume
1 Press SETTINGS at the center bottom of the
main screen, swipe to the second settings screen, and press Volume.
2 Select MUTE, LOW, or HIGH.
3 Press OK.
Program Update
Once the appliance is connected to a home Wi-Fi network, use this setting to check for available programming updates and install them.
1 Press SETTINGS at the center bottom of the
main screen, swipe to the second settings screen, and press Program Update.
Factory Data Reset
This function returns all settings to the factory defaults.
1 Press SETTINGS at the center bottom of the
main screen, swipe to the second settings screen,and press Factory Data Reset.
2 If you want to reset data to the factory
defaults, press RESET and then OK.
NOTE · All stored data will be deleted.
Open Source License
This screen contains open source software licensing information.
1 Press SETTINGS at the center bottom of the
main screen and swipe to the second settings screen.
2 Press Open Source License.

en-us_main.book.book Page 23 Tuesday, October 17, 2023 9:43 AM

ENGLISH

Before Using the Cooktop
Before using the cooktop for the first time, clean it thoroughly with the included cleaner or ceramic cooktop cleaner according to the Care and Cleaning instructions in this guide. This will help protect the ceramic surface and make future cleanup easier.
CAUTION · Never use abrasive scrubbing pads or cleaners.
They can cause permanent damage to the cooktop surface.
Activating the Cooktop
To turn on the cooktop, press the POWER key for approximately 1 second. The LCD panel will turn on. To turn off the cooktop, press the POWER key.
NOTE · After turning on the cooktop with the POWER
key, you must select one of the cooking zones within 60 seconds. If no selection is made, the cooktop will turn off for safety.
Automatic Detection
· The automatic detection function checks whether or not a container is placed on top of the burner.
· When a container is placed on the burner, the words “Auto Detected” will be displayed. (The words “Auto Detected” will disappear after 30 seconds or when the burner is running.)
· The words “Auto Detected” will not be displayed if a container is not placed on the burner, and this function is activated initially only once after the power is turned on.
· Depending on the conditions of use (whether the burner is being used, the container material, status of the container base, etc.), the automatic detection time may differ or the cookware may not be detected automatically.

OPERATION 23
NOTE · If the cookware is too small, the words “Auto
Detected” may not be displayed. · Minimum cookware size
– Use cookware with a bottom surface diameter of 5 13/16″ (147 mm) or greater.
– For flexible cooking zone, minimum cookware size is 4 3/4″ x 10 5/8″ (120 mm x 270mm).
Selecting the Cooking Zone
Place an induction-compatible pan on top of the desired cooking zone.
Press the icon s in the desired cooking zone on
the display to set the power level.
NOTE · Once the cooking zone has been selected the
power level must be selected within 3 seconds with the element power settings. Otherwise, the power settings will turn off for safety.
Setting the Power Level
The power level for the selected cooking zone can be set from 1 to 9. Selecting the Power Level
1 Press a number in the Power Levels popup to
set the power level from 1 to 9. If you’ve set 17 power levels in the settings menu, press the dots between the numbers to adjust the power level up or down half a step.

en-us_main.book.book Page 24 Tuesday, October 17, 2023 9:43 AM

24 OPERATION

Readjusting the Power Level
1 Press the desired cooking zone in the display
to bring up the Power Levels popup.

1 2

A

B

2 Selecting a power level turns on the cooking
zone. The cooking zone indicator remains lit and the power level is stored.

2 Press the desired level in the Power Levels
popup. If no selection is made, the Power Level popup disappears after 3 seconds and the power level remains the same.
NOTE · Once the power level is changed, the burner
operation is temporarily stopped and then restarted at the changed power level.

a Figure A b Figure B
NOTE · If a power level is not selected, the power
settings will turn off after 3 seconds.

Power Level Indicator
· Cooking element LED bar
– The range provides an LED bar for each cooking element on the cooktop. Check the display and use the LEDs to monitor the power levels of the elements.

ENGLISH

en-us_main.book.book Page 25 Tuesday, October 17, 2023 9:43 AM

a 9 Step
b Boost
c Melt
d Simmer · Available power level settings
– The cooktop control’s LED bar displays the element’s power level settings, ranging from Level 1 to Level 9 to Boost.
Turning Off the Cooking Zone
1 After the cooking is complete, press the x icon
on the display to turn off the cooking zone.

OPERATION 25
Although the cooktop is off, the popup message will stay lit until the cooktop has cooled down.

2 The corresponding cooking zone display will
turn off.
3 To turn off all cooking zones, press the
POWER key.
WARNING · Your cooktop has a residual heat indicator for
each cooking zone. This indicator will warn that this area has been used and is still giving off enough heat to cause burns. Avoid touching the cooking zone when this indicator is shown.

NOTE · If the following pop-up screen appears during
operation, check for the following issues.
– The cookware is not centered within the cooking zone.
– The cookware is not compatible with induction cooking.
– There is no cookware on the cooking zone.

Tips for Induction Cooking
Getting the results you want when cooking can take a bit of time and effort. If you are not familiar with induction cooking, it may take a bit of practice or adjusting of your usual methods to achieve the expected results. Using the cooking chart and these cooking tips as a guide, you will soon be enjoying the benefits of induction cooking.
· The quantity or quality of some foods can affect their cooking times.

en-us_main.book.book Page 26 Tuesday, October 17, 2023 9:43 AM

26 OPERATION

· When safe, allow food to come to room temperature before cooking to take advantage of induction’s ability to heat food quickly.
· Cookware heats up very quickly when induction cooking. Check food or liquids occasionally and stir or reduce heat to avoid scorching, overcooking, splattering, or boilovers.
· Sauces, soups, and stews may heat up more quickly than you are used to and boil over if not watched. For best results, stir frequently.
· Overcooked food loses moisture and tastes dry, while undercooked food can cause illness. For best results, use a thermometer to ensure that food is heated to a safe internal temperature.
· Use nonstick or seasoned pans when cooking to reduce the amount of additional fat added to a recipe.
· Don’t overcrowd cookware. To avoid slow cooking times and poor results, use cookware that is appropriately sized for the amount of food you are cooking.
· When boiling water on the center element, an 11″ diameter pot gives the best performance and saves the most time.

· Use the Boost setting to quickly boil water, or whenever you need extra heating power in one element.
· To quickly boil a very large quantity of water, set the center element to Boost, use a pot that is at least 9″ in diameter so that the center dual element is activated, and turn off all other elements.
· To prevent damage to the product, if one of the right-side elements is turned on when the center dual element is using the Boost setting, the power setting of the center dual element is automatically reduced to power level 9. To maintain the Boost setting on the center dual element, use any of the left- side elements instead.

)/(;,%/(,1’8&7,21

‘8$/,1’8&7,21

32:(5

)/(;,%/(,1’8&7,21

‘8$/,1’8&7,21

32:(5
a Boost

,1’8&7,21 ,1’8&7,21

)/(;,%/(,1’8&7,21

‘8$/,1’8&7,21

32:(5

,1’8&7,21

,1’8&7,21

,1’8&7,21 ,1’8&7,21

Cooking Function Melting
Reheating Sweating Vegetables
Simmering

Example Food Item
· Chocolate Over Direct Heat
· Butter
· Soups & Stews
· Onions · Carrots · Celery · Peppers · Tomato Sauce · Cheese Sauce · Potatoes · Grains · Stocks/Broths or
Stews

Power Level
1 or Melt
2 3-4

Notes/Comments
Stir continuously to prevent scorching. If using a double boiler to melt chocolate, use power level 2.
Monitor carefully to prevent poor results.
Monitor carefully and stir frequently to achieve desired results.

5-6

To sweat vegetables, cook them until they release moisture, without browning.

Simmer 4-5-6

Monitor carefully to prevent spillovers. To steam vegetables or grains, bring cooking liquid to a simmer, cover the pot, and reduce heat to power level 2.

ENGLISH

en-us_main.book.book Page 27 Tuesday, October 17, 2023 9:43 AM

OPERATION 27

Cooking Function

Example Food Item

Power Level

Notes/Comments

Sautéing or Other

· Steaks/Chops · Eggs · Breakfast Meats · Frozen Vegetables · Stir Frying

5-6-7

Monitor carefully and stir frequently to achieve desired results.

Searing/ Browning

· Browning Beef For Chili or Stews
· Steaks or Chops

Room temperature meats will sear and brown

8-9

more effectively.

Fat may splatter if power level is too high.

Frying/Deep Frying

· Fried Chicken
· French Fries
· Battered Fish/ Shellfish

7-8

Fat may splatter if power level is too high.

Blanching Vegetables

· Broccoli · Cauliflower · Green Beans

8-9

Monitor carefully to prevent spillovers.

Boiling

· Pasta Water · Shellfish

8-9-Boost

Do not fill pot to rim. Water can boil over if the power level is too high.

NOTE
· These settings are recommended guidelines for cooking. You may need to adjust the power level for the type of food and pan. Cooking times for some foods will vary depending on quantity or quality.

Turning Melt On Place the cookware on the rear right cooking zone. Activate the Power Levels popup and press the MELT key.

Using the Cook Modes
SIMMER
Use SIMMER to simmer sauces or stews.
Turning Simmer On Place the cookware on any cooking zone except for the rear right cooking zone. Activate the Power Levels popup and press the SIMMER key.

BOOST
Use the Boost function to boil water or heat up large quantities of food quickly.
To prevent damage to the product, if one of the right-side elements is turned on when the center dual element is using the Boost setting, the power setting of the center dual element is automatically reduced to power level 9. To maintain the Boost setting on the center dual element, use any of the left- side elements instead.

MELT
Use MELT to melt items such as chocolate or butter without scorching.

en-us_main.book.book Page 28 Tuesday, October 17, 2023 9:43 AM

28 OPERATION
For safety, after 6 minutes the Boost setting will automatically revert to either power level 9 or the previously set power level.

)/(;,%/(,1’8&7,21

‘8$/,1’8&7,21

32:(5

)/(;,%/(,1’8&7,21

‘8$/,1’8&7,21

32:(5
a Boost

,1’8&7,21 ,1’8&7,21

)/(;,%/(,1’8&7,21

‘8$/,1’8&7,21

32:(5

,1’8&7,21

,1’8&7,21

,1’8&7,21 ,1’8&7,21

Turning Boost On Place the cookware on a cooking zone. Activate the Power Levels popup and press the BOOST key.

NOTE · If one of the two burners in the Flex Cooking
Zone is functioning, cancel the burner to use the Flex feature.
2 To merge the 2 cooking zones, press the Flex
icon. The icon will change to show one combined zone.

WARNING
· Never use the Boost mode to preheat empty cookware or to heat oil, butter or lard. The cookware may be damaged and the fat or grease may catch fire if overheated.

NOTE
· Under certain conditions, the Boost function will turn off automatically to protect electronic elements inside the cooktop.
· This can occur if the product is used for long periods, when frying, or if cookware is lifted or moved in the Boost mode.

3 Select the desired power level.
4 To turn off Flex mode, press the Flex icon
again.

Using the Flexible Cooking Zone
Adjoining cooking zones can be combined to create one large cooking zone with the Flex function. This is especially convenient when cooking in Dutch ovens or other large oblong pans.
Activating the Flexible Cooking Zone
1 Place the cookware over 2 side cooking zones
and make sure both cooking zones are activated. The Flex icon will show 2 divided zones.

Using the Dual Cooking Zone
The dual element, located in the center position, offers two different sized elements to accommodate different pan sizes. The cooking zone automatically activates the single or double cooking zone, supplying the proper power to optimize cooking results. The effectiveness of the

en-us_main.book.book Page 29 Tuesday, October 17, 2023 9:43 AM

pan sensing depends on the material and properties of the cookware being used.

OPERATION 29
wait 30 seconds or press the Clean Lock icon for 1 second.

ENGLISH

Activating the Dual Cooking Zone
1 To activate the larger cooking zone, place a
pan that is at least 9″ (23 cm) in diameter on the cooking zone.
2 Select the desired power level.

Timer
Kitchen Timer The Kitchen Timer acts as a simple timer and does not turn off the cooking zone. It is not tied to any specific cooking zone. When the set time has passed, it sounds an alarm.
· Press the Kitchen Timer icon. Scroll (or use the keypad icon) to set the desired hours, minutes, and seconds, then press OK.

Other Functions
Pause
The pause function reduces the power level of a cooking zone to level 1 and maintains it at that level until deactivated. To use the pause function, press the Pause icon. To turn off the pause function, press Pause again to return the cooking zone to the previous power level.

Clean Lock
Use this function when cleaning the screen area of the cooktop. Press the Clean Lock icon to lock the controls for 30 seconds. To unlock the controls,

· When the set time has passed, a popup screen with “Timer finished” appears with the alarm sound.

en-us_main.book.book Page 30 Tuesday, October 17, 2023 9:43 AM

30 OPERATION Cooking Timer The Cooking Timer also acts as a simple timer and does not automatically turn off the cooking zone. This timer can be set for each cooking zone, and sounds an alarm when the set time has passed. · If the cooking zone is in use, press the Cooking
Timer icon on the active cooking zone. Scroll (or use the keypad icon) to set the desired hours and minutes, then press OK.
· When the set time has passed, a popup screen appears with the alarm sound.
· Press YES to turn off the cooking zone.

Cookware Heating Index
The cookware heating index can be used to determine if a container will heat well on an induction burner. · The heating index may vary due to conditions
such as voltage, cookware size, or cookware temperature. Use cookware with a bottom diameter that is suitable for the burner size. · The heating index may vary depending on the burner. · The cookware heating index displayed on this product is based on internal manufacturer standards. Environmental conditions may cause inaccurate or variable results. Use the results only as a reference point.
Using the Heating Index
1 Turn off all burners.
· If more than one burner is running, this function will not work.
2 Place the cookware on the burner you want to
use. · Place cookware in the center of the burner.

3 Set the output level to 9.

WARNING · The Timer function does not automatically turn
off the cooktop or cooking zones. Be sure to press the POWER key to turn the cooktop off after cooking.
Automatic Power Level Control
The power level displayed may be different from the actual power level at the high end of the temperature range. To prevent the cooktop from overheating, the power level is controlled automatically.
NOTE · Power Cycling
– It is normal for heating elements to cycle On/ Off during use to control output power.

4 Long press (more than 3 seconds) on the
power level area to display the cookware heating index.

a Long press (more than 3 seconds) on level 9.
b The cookware heating index is displayed.

Index (%)

0

1 0

2 0

3 0

4 0

5 0

6 0

7 0

8 0

9 0

1 0 0

Heating

a No heating b Low c High

en-us_main.book.book Page 31 Tuesday, October 17, 2023 9:43 AM
· The higher the index, the better the cookware heats up (in the range of 0 to 100%, in 10% increments).
· If the index is low, check the material, size and shape of the cookware base. – Even if the cookware has an IH mark, if the index is low it may not heat properly on this appliance.

OPERATION 31

ENGLISH

en-us_main.book.book Page 32 Tuesday, October 17, 2023 9:43 AM

32 SMART FUNCTIONS
SMART FUNCTIONS

LG ThinQ Application
This feature is only available on models with Wi-Fi.
The LG ThinQ application allows you to communicate with the appliance using a smartphone.
LG ThinQ Application Features
· Monitoring
– This function helps you check the current status, remaining time, cook settings and end time in one place.
· Product Notifications
– Turn on the Push Alerts to receive appliance status notifications. The notifications are triggered even if the LG ThinQ application is not open.
· Interworking Function
– The LG ThinQ automatically turns on/off the vent fan when paired with the cooktop. Both products must be connected to the LG ThinQ application and have an interworking funtion.
· Firmware Update
– Keep the appliance updated.
NOTE · If you change your wireless router, Internet
service provider, or password, delete the connected appliance from the LG ThinQ application and connect it again.
· To disconnect the appliance from the Wi-Fi network, delete the cooktop from the list of connected products in the LG ThinQ application.
· The appliance is not intended to be operated by means of remote control system.
· This information is current at the time of publication. The application is subject to change for product improvement purposes without notice to users.

Installing LG ThinQ Application and Connecting an LG Appliance
Models with QR Code
Scan the QR code attached to the product using the camera or a QR code reader application on your smartphone.
Models without QR Code
1 Search for and install the LG ThinQ
application from the Google Play Store or Apple App Store on a smartphone.
2 Run the LG ThinQ application and sign in with
your existing account or create an LG account to sign in.
3 Touch the add (~) button on the LG ThinQ
application to connect your LG appliance. Follow the instructions in the application to complete the process.
NOTE
· To verify the Wi-Fi connection, check that the f
icon on the control panel is lit. · The appliance supports 2.4 GHz Wi-Fi networks
only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual. · LG ThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection. · The surrounding wireless environment can make the wireless network service run slowly. · If the distance between the appliance and the wireless router is too far, the signal becomes weak. It may take a long time to connect or fail to install the application.

en-us_main.book.book Page 33 Tuesday, October 17, 2023 9:43 AM

ENGLISH

· If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.
· The network connection may not work properly depending on the Internet service provider.
· The Wi-Fi may not connect or the connection may be interrupted because of the home network environment.
· If the appliance cannot be connected due to problems with the wireless signal transmission, unplug the appliance and wait about a minute before trying again.
· If the firewall on your wireless router is enabled, disable the firewall or add an exception to it.
· The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
· Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer.
· If the security protocol of the router is set to WEP, network setup may fail. Change the security protocol (WPA2 is recommended), and connect the product again.

Installing the LG ThinQ Application
Search for the LG ThinQ application from the Google Play Store or Apple App Store on a smartphone. Follow instructions to download and install the application.

Wireless LAN Module Specifications

Frequency Range

2412 MHz – 2462 MHz

Output Power < 30 dBm (Max)

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules for transmitter module and part 18 of the FCC Rules for this equipment. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

SMART FUNCTIONS 33
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and the receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
This device (transmitter module contained in this product) complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.
Industry Canada Statement
This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.

en-us_main.book.book Page 34 Tuesday, October 17, 2023 9:43 AM
34 SMART FUNCTIONS
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body.
NOTE · THE MANUFACTURER IS NOT RESPONSIBLE FOR
ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Open Source Software Notice Information
To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that have the obligation to disclose source code, and to access all referred license terms, copyright notices and other relevant documents, please visit https:// opensource.lge.com. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid to anyone in receipt of this information for a period of three years after our last shipment of this product.

en-us_main.book.book Page 35 Tuesday, October 17, 2023 9:43 AM

ENGLISH

MAINTENANCE
Care and Cleaning
Make sure that the electrical power is off and all surfaces are cool before cleaning any part of the cooktop.
Cleaning the Cooktop
Normal Daily Use Cleaning
CAUTION · If any sugar or food containing sugar spills, or
plastic or foil melts on the cooktop, remove the material IMMEDIATELY with a metal razor scraper while the cooking surface is still hot to avoid the risk of damage to the glass-ceramic surface. When used correctly, the scraper will not damage the cooktop surface. For your safety, please use an oven mitt or pot holder while scraping the hot cooking surface. · If water or food containing water spills, remove the spill IMMEDIATELY with a dry paper towel. · Do not use scrub pads or abrasive cleaning pads. They may damage your cooktop surface. · For your safety, wear an oven mitt or pot holder while cleaning the hot cooking surface.
Use ceramic cooktop cleaner on the glass cooktop. Other creams may not be as effective or may scratch, damage or stain the cooktop surface. To maintain and protect the surface of the glass cooktop, follow these steps:
1 Before using the cooktop for the first time,
clean it with a ceramic cooktop cleaner. This helps protect the top and makes cleanup easier.
2 Use ceramic cooktop cleaner regularly to help
keep the cooktop looking new. Always allow the cooktop to cool before using ceramic cooktop cleaner.
3 Shake the cleaning cream well. Apply a few
drops of cleaner directly to the cooktop.
4 Use a paper towel to clean the entire cooktop
surface.

MAINTENANCE 35
5 Rinse with clear water and use a dry cloth or
paper towel to remove all cleaning residue.
NOTE · Any damage or failure of the product resulting
from the items below may not be covered under the LIMITED WARRANTY. – Sugary spillovers (such as preserves, ketchup,
tomato sauce, jellies, fudge, candy, syrups, or chocolate) or melted plastics can cause pitting on the surface of your cooktop. – If food or water containing calcium (such as baking powder, wine, milk, spinach, or broccoli) is spilled on the cooktop, it can permanently stain or discolor the surface.
Burned-On Residue
1 While the cooktop is still warm, remove any
burnt on deposits or spilled food from the glass-ceramic cooking surface with a suitable metal razor scraper. To prevent burns, wear an oven mitt or pot holder while using the metal scraper.
NOTE · Do not use a dull or nicked blade. · Hold the scraper at approximately a 30° angle to
the cooktop. · The razor scraper will not damage the markings
on the cooking surface.
2 When the cooking surface has completely
cooled, apply a few fingertip-sized dabs of a glass-ceramic cooktop cleaner in each burner area. Work the cleaning cream over the cooktop surface with a damp paper towel. Leave the cleaner on for 10 minutes before rinsing it off.

en-us_main.book.book Page 36 Tuesday, October 17, 2023 9:43 AM

MAINTENANCE

3 Rinse with clean water and wipe the cooktop
surface with a clean, dry cloth.

Maintaining the Cooktop
CAUTION · Do not use chlorine bleach, ammonia, or other
cleaners not specifically recommended for use on glass-ceramic cooktops. · Let your glass-ceramic cooking surface cool off before cleaning.

Regular (Recommended after each use)

Wipe off with a damp towel and mild detergent

Use a metal scraper

Apply cooktop cleaning cream. Rub with a towel.

Rinse with a damp towel, then wipe
dry.

Occasional (Recommended every week)
Thorough (Recommended for tough stains or burnt-on food)
NOTE · For additional product information, visit our
website at www.lg.com
Metal Marks and Scratches
CAUTION · Cookware with rough or uneven bottoms can
mark or scratch the cooktop surface.
· Do not slide metal or glass across the cooktop surface.
· Do not use cookware with any dirt build-up on the bottom.

· Do not use cookware if there is foreign matter on the cooktop surface. Always clean the cooktop surface before cooking.
NOTE
· Any damage or failure of the product resulting from the items below may not be covered under the LIMITED WARRANTY.
– Be careful not to slide pots and pans across the cooktop. Doing so will leave metal markings on the cooktop surface. To help remove these marks, use a ceramic cooktop cleaner with a cleaning pad for ceramic cooktops.
– If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave a black discoloration on the cooktop. This should be removed immediately before heating again or the discoloration may be permanent.

en-us_main.book.book Page 37 Tuesday, October 17, 2023 9:43 AM

ENGLISH

TROUBLESHOOTING

TROUBLESHOOTING 37

Before Calling for Service
Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of a defect in workmanship or materials.
Parts and Features

Problem Cooktop does not work
Cooktop does not heat
Elements turn off while cooking. Elements do not get hot enough.
A fan sound can be heard.
Noises are heard during cooking. The following noises are normal.

Possible Cause & Solution
Cooktop controls are locked. · See Clean Lock to turn off the Clean Lock feature.
Circuit breaker has tripped or fuse is blown. · Reset the circuit breaker.
Power outage. · Check house lights to confirm power outage.
Installation wiring not complete. · Contact the installer or dealer.
Incorrect cooking zone selected. · Make sure the correct control is ON for the cooking zone being used.
No power to cooktop. · See “Cooktop does not work” above.
Cooktop inner temperature is too high. · Check that cooktop has been installed according to the installation instructions.
Control panel may not be set properly. · Check the power level.
Cookware that is not marked IH or convection compatible may not heat properly. · Use cookware with the IH mark.
Cookware may not be flat or the correct shape or size. · Use cookware with a flat bottom. · Minimum cookware size
– Use cookware with a bottom surface diameter of 5 13/16″ (147 mm) or greater. – For Flexible Cooking Zone, minimum cookware size is 4 3/4″ x 10 5/8″ (120 mm x 270
mm) · For best results when using the Dual cooking zone, use cookware with a bottom surface
that is 9″ in diameter or larger. · Use the recommended cookware. See Induction Cookware.
Cooktop inner temperature is high. · This is normal.
The cooling fan will run when any element is turned on. With heavy use the fan may continue to run after the controls are turned off until the cooktop has cooled.
Humming/buzzing sound · Caused by the magnetic field transmitting power to the cookware. It is most noticeable at
high power settings and becomes quieter if the power is reduced.

en-us_main.book.book Page 38 Tuesday, October 17, 2023 9:43 AM

38 TROUBLESHOOTING

Problem

Possible Cause & Solution

Noises are heard during cooking. The following noises are normal.

Whistling sound
· Most noticeable with lighter weight cookware or when cookware is empty.
· Under certain conditions, your cookware may produce a high-pitched whistling noise when two elements are in use at the same time. The power levels at which this occurs may vary depending on the kind of cookware being used. Change the power level to eliminate the noise or reduce its volume.

Cracking sound
· May occur when using composite cookware as the different materials resonate and heat at different rates. This will not damage or impair the performance of the cookware.

Clicking sound · Caused by the electrical switches. · It is normal to hear a clicking noise when operating burners below power level 6.

Ticking sound · Caused by the cookware detection.

The Boost function has been deactivated or cannot be activated.

To prevent damage to the product, if one of the right-side elements is turned on when the center dual element is using the Boost setting, the power setting of the center dual element is automatically reduced to power level 9.
· To maintain the Boost setting on the center dual element, use any of the left side elements instead.
· For safety, after 6 minutes the Boost setting will automatically revert to either power level 9 or the previously set power level.

The cookware cannot be detected automatically.

There is no cookware on the burner. · Place cookware on the burner. The words “Auto Detected” will be displayed.
Cookware is not compatible with induction cooktop. · Use only cookware that is compatible with the induction cooktop. For details of compatible
cookware, see Induction Cookware

Cookware has been damaged.

Cookware is overheated. · Never use the Boost mode to preheat empty cookware or to heat oil, butter or lard. · Use the Boost function to boil water or heat up large quantities of food quickly.

Output power is different when the same type of burner is used.

Cooktop is overheated.
· The power level displayed may be different from the actual power level at the high end of the temperature range. To prevent the cooktop from overheating, the power level is controlled automatically.

Power cycling

This is normal. · During use, the heating element cycles on/off to control the output power.

The LCD screen does Hot cookware is placed on top of the LCD screen.

not work properly.

· To prevent malfunction, do not place the hot cookware on top of the LCD screen.

Timer does not turn off the cooking zone.

This is normal.
· The kitchen timer/cooking timer acts as a simple timer and does not turn off the cooking zone.

The hot surface indicator stays on after the burners are turned off.

This is normal.
· After you turn off the burners, the indicator remains on until the ceramic glass surface cools down.
· If the temperature near the product is high, it may take longer for the ceramic glass surface to cool down.

en-us_main.book.book Page 39 Tuesday, October 17, 2023 9:43 AM

TROUBLESHOOTING 39

Problem
Error code FC, F1, or F5 appears on the display.

Possible Cause & Solution Electronic control has detected a fault condition. · Turn the power off and then on again to turn off the error code. · If the issue recurs, call for service.

ENGLISH

Wi-Fi

Problem
Trouble connecting appliance and smartphone to Wi-Fi network

Possible Cause & Solution
The password for the Wi-Fi network was entered incorrectly.
· Delete your home Wi-Fi network and begin the connection process again.
Mobile data for your smartphone is turned on.
· Turn off the Mobile data on your smartphone before connecting the appliance.
The wireless network name (SSID) is set incorrectly.
· The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
The router frequency is not 2.4 GHz.
· Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and connect the appliance to the wireless router. To check the router frequency, check with your Internet service provider or the router manufacturer.
The appliance and the router are too far apart.
· If the appliance is too far from the router, the signal may be weak and the connection may not be configured correctly. Move the router closer to the appliance or purchase and install a Wi-Fi repeater.
During Wi-Fi setup, the app is requesting a password to connect to the product (on certain phones).
· Locate the network name which starts with “LG” under Settings > Networks. Note the last part of the network name. – If the network name looks like LGE_Appliance_XX-XX-XX, enter lge12345. – If the network name looks like LGE_Appliance_XXXX, enter XXXX twice as your password. For example, if the network name appears as LGE_Appliance_8b92, then you would enter 8b928b92 as your password. In this instance, the password is case sensitive and the last 4 characters are unique to your appliance.

en-us_main.book.book Page 40 Tuesday, October 17, 2023 9:43 AM

40 LIMITED WARRANTY
LIMITED WARRANTY

USA

TERMS AND CONDITIONS
ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG ELECTRONICS (“LG”) TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.
Should your LG Induction Cooktop (“Product”) fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG will, at its option, repair or replace the Product. This limited warranty is valid only to the original retail purchaser of the Product (“You”) and applies only when purchased lawfully and used within the United States including U.S. Territories.

Warranty Period

Scope of Warranty

HOW SERVICE IS HANDLED

Two (2) years from date of original retail purchase

Parts and Labor (internal LG will provide, free of charge, all labor and in- home

/ functional parts only)

service to replace defective part(s).

· Replacement Products and parts are warranted for the remaining portion of the original warranty period or ninety (90) days, whichever is greater.
· Replacement Products and parts may be new, reconditioned, refurbished, or otherwise factory remanufactured.
· Replaced Product or part(s) will be the property of LG.
· Proof of original retail purchase specifying the Product model and date of purchase is required to obtain warranty service under this limited warranty.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THE PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THE ABOVE LIMITED WARRANTY. UNDER NO CIRCUMSTANCES SHALL LG OR ITS U.S. DISTRIBUTORS/DEALERS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST GOODWILL, LOST REVENUES OR PROFITS, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, COST OF REMOVAL AND REINSTALLATION OF THE PRODUCT, LOSS OF USE, OR ANY OTHER DAMAGES WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. LG’S TOTAL LIABILITY, IF ANY, SHALL NOT EXCEED THE PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

THIS LIMITED WARRANTY DOES NOT COVER:
· Service trips to deliver, pick up, or install, educate how to operate, correct wiring, or correct unauthorized repairs.
· Damage or failure of the Product to perform during power failures and interrupted or inadequate electrical service.
· Damage or failure of the Product caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted water supply or inadequate supply of air.
· Damage or failure of the Product resulting from operating the Product in a corrosive atmosphere or contrary to the Product owner’s manual.

ENGLISH

en-us_main.book.book Page 41 Tuesday, October 17, 2023 9:43 AM
LIMITED WARRANTY 41
· Damage or failure of the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, acts of nature, or any other causes beyond the control of LG.
· Damage or failure of the Product caused by unauthorized modification or alteration, or if the Product is used for other than the intended purpose, or any water leakage where the Product was not properly installed.
· Damage or failure of the Product caused by incorrect electrical current, voltage, or plumbing codes. · Damage or failure of the Product caused by transportation, storage, and/or handling, including
scratches, dents, chips, and/or other damage to the finish of the Product, unless such damage is reported within one (1) week of delivery. · Damage or failure of the Product resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair includes the use of parts not authorized by LG. Improper installation or maintenance includes installation or maintenance contrary to the Product owner’s manual. · Damage or failure of the Product caused by the use of parts, components, accessories, consumable cleaning products, or any other products or services that were not authorized by LG. · Damage or missing items to any display or open box Product. · Refurbished Product or any Product sold “As Is”, “Where Is”, “With all Faults”, or similar disclaimer. · Products with original serial numbers that have been removed, altered, or cannot be readily determined. · Increases in utility costs and additional utility expenses. · Any noises associated with normal operation. · Products used for other than normal and proper household use (e.g., commercial or industrial use) or contrary to the Product owner’s manual. · Costs associated with removal and reinstallation of the Product for repairs, or the removal and reinstallation of the Product if it is installed in an inaccessible location or not installed in accordance with the Product Owner’s manual. · Accessories, removable components, or consumable parts (e.g. Shelves, door bins, drawers, water/air filters, racks, light bulbs, batteries, etc., as applicable), except for internal/functional parts covered under this limited warranty. The cost of repair or replacement under these excluded circumstances shall be borne by You. TO OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION Call 1-800-243-0000 and select the appropriate option from the menu.
Or visit our website at http://www.lg.com Or by mail: LG Electronics Customer Service P.O. Box 240007 Huntsville, AL 35813 ATTN: CIC
PROCEDURE FOR RESOLVING DISPUTES:
ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION. BINDING ARBITRATION MEANS THAT YOU AND LG ARE EACH WAIVING THE RIGHT TO A JURY TRIAL AND TO BRING OR PARTICIPATE IN A CLASS ACTION. Definitions. For the purposes of this section, references to “LG” mean LG Electronics U.S.A., Inc., its parents, subsidiaries and affiliates, and each of their officers, directors, employees, agents, beneficiaries, predecessors in interest, successors, assigns and suppliers; references to “dispute” or “claim” shall include any dispute, claim or controversy of any kind whatsoever (whether based in contract, tort, statute, regulation, ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or relating in any way to the sale, condition or performance of the product or this Limited Warranty. Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG Electronics, USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632. You and LG agree to engage in good faith discussions in an attempt to amicably resolve your claim. The notice must provide your name, address, and telephone number; identify the product that is the subject of

en-us_main.book.book Page 42 Tuesday, October 17, 2023 9:43 AM
42 LIMITED WARRANTY
the claim; and describe the nature of the claim and the relief being sought. If you and LG are unable to resolve the dispute within 30 days, either party may proceed to file a claim for arbitration.
Agreement to Binding Arbitration and Class Action Waiver. Upon failure to resolve the dispute during the 30 day period after sending written notice to LG, you and LG agree to resolve any claims between us only by binding arbitration on an individual basis, unless you opt out as provided below. Any dispute between you and LG shall not be combined or consolidated with a dispute involving any other person’s or entity’s product or claim. More specifically, without limitation of the foregoing, any dispute between you and LG shall not under any circumstances proceed as part of a class or representative action. Instead of arbitration, either party may bring an individual action in small claims court, but that small claims court action may not be brought on a class or representative basis.
Arbitration Rules and Procedures. To begin arbitration of a claim, either you or LG must make a written demand for arbitration. The arbitration will be administered by the American Arbitration Association (“AAA”) and will be conducted before a single arbitrator under the AAA’s Consumer Arbitration Rules that are in effect at the time the arbitration is initiated (referred to as the “AAA Rules”) and under the procedures set forth in this section. The AAA Rules are available online at www.adr.org/consumer. Send a copy of your written demand for arbitration, as well as a copy of this provision, to the AAA in the manner described in the AAA Rules. You must also send a copy of your written demand to LG at LG Electronics, USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632. If there is a conflict between the AAA Rules and the rules set forth in this section, the rules set forth in this section will govern. This arbitration provision is governed by the Federal Arbitration Act. Judgment may be entered on the arbitrator’s award in any court of competent jurisdiction. All issues are for the arbitrator to decide, except that issues relating to the scope and enforceability of the arbitration provision and to the arbitrability of the dispute are for the court to decide. The arbitrator is bound by the terms of this provision.
Governing Law. The law of the state of your residence shall govern this Limited Warranty and any disputes between us except to the extent that such law is preempted by or inconsistent with applicable federal law.
Fees/Costs. You do not need to pay any fee to begin an arbitration. Upon receipt of your written demand for arbitration, LG will promptly pay all arbitration filing fees to the AAA unless you seek more than $25,000 in damages, in which case the payment of these fees will be governed by the AAA Rules. Except as otherwise provided for herein, LG will pay all AAA filing, administration and arbitrator fees for any arbitration initiated in accordance with the AAA Rules and this arbitration provision. If you prevail in the arbitration, LG will pay your attorneys’ fees and expenses as long as they are reasonable, by considering factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the foregoing, if applicable law allows for an award of reasonable attorneys’ fees and expenses, an arbitrator can award them to the same extent that a court would. If the arbitrator finds either the substance of your claim or the relief sought in the demand is frivolous or brought for an improper purpose (as measured by the standards set forth in Federal Rule of Civil Procedure 11(b)), then the payment of all arbitration fees will be governed by the AAA Rules. In such a situation, you agree to reimburse LG for all monies previously disbursed by it that are otherwise your obligation to pay under the AAA Rules. Except as otherwise provided for, LG waives any rights it may have to seek attorneys’ fees and expenses from you if LG prevails in the arbitration.
Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration conducted solely on the basis of (1) documents submitted to the arbitrator, (2) through a telephonic hearing, or (3) by an in-person hearing as established by the AAA Rules. If your claim exceeds $25,000, the right to a hearing will be determined by the AAA Rules. Any in-person arbitration hearings will be held at a location within the federal judicial district in which you reside unless we both agree to another location or we agree to a telephonic arbitration.
Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by either: (i) sending an e-mail to optout@lge.com, with the subject line: “Arbitration Opt Out” or (ii) calling 1800-980-2973. You must include in the opt out e-mail or provide by telephone: (a) your name and address; (b) the date on which the product was purchased; (c) the product model name or model number; and (d) the serial number (the serial number can be found (i) on the product; or (ii) online by accessing https:// www.lg.com/us/support/repair- service/schedule-repair-continued and clicking on “Find My Model & Serial Number”).

en-us_main.book.book Page 43 Tuesday, October 17, 2023 9:43 AM
LIMITED WARRANTY 43
You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure. Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any way, and you will continue to enjoy the full benefits of the Limited Warranty. If you keep this product and do not opt out, then you accept all terms and conditions of the arbitration provision described above.

ENGLISH

en-us_main.book.book Page 44 Tuesday, October 17, 2023 9:43 AM

LIMITED WARRANTY

CANADA
TERMS AND CONDITIONS
ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS THE LAWS OF YOUR PROVINCE OR TERRITORY DO NOT PERMIT THAT, OR, IN OTHER JURISDICTIONS, IF YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.
Should your LG Induction Cooktop (“Product”) fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG Electronics Canada, Inc. (“LGECI”) will, at its option, repair, replace or pro rate the Product upon receipt of proof of the original retail purchase. This limited warranty is valid only to the original retail purchaser of the Product and applies only to a Product distributed, purchased from an authorized retailer and used within Canada, as determined at the sole discretion of LGECI.
WARRANTY PERIOD: (Note: If the original date of purchase cannot be verified, the warranty will begin sixty (60) days from the date of manufacture).
Parts and Labor (internal/functional parts only)
Two (2) years from the date of original retail purchase
· Replacement products and parts are warranted for the remaining portion of the original warranty period or ninety (90) days, whichever is greater.
· Replacement products and parts may be new, reconditioned, refurbished, or otherwise factory remanufactured, all at the sole discretion of LGECI.
· Proof of original retail purchase specifying the Product model and date of purchase is required to obtain warranty service under this Limited Warranty.
LGECI’S SOLE LIABILITY IS LIMITED TO THE LIMITED WARRANTY SET OUT ABOVE. EXCEPT AS EXPRESSLY PROVIDED ABOVE, LGECI MAKES NO, AND HEREBY DISCLAIMS, ALL OTHER WARRANTIES AND CONDITIONS RESPECTING THE PRODUCT, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND NO REPRESENTATIONS SHALL BE BINDING ON LGECI. LGECI DOES NOT AUTHORIZE ANY PERSON TO CREATE OR ASSUME FOR IT ANY OTHER WARRANTY OBLIGATION OR LIABILITY IN CONNECTION WITH THE PRODUCT. TO THE EXTENT THAT ANY WARRANTY OR CONDITION IS IMPLIED BY LAW, IT IS LIMITED TO THE WARRANTY PERIOD SET OUT ABOVE. UNDER NO CIRCUMSTANCES SHALL LGECI, THE MANUFACTURER OR DISTRIBUTOR OF THE PRODUCT, BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, DIRECT, INDIRECT, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, WITHOUT LIMITATION, LOSS OF GOODWILL, LOST PROFITS, LOSS OF ANTICIPATED PROFITS, LOST REVENUE, LOSS OF USE, OR ANY OTHER DAMAGE, WHETHER ARISING DIRECTLY OR INDIRECTLY FROM ANY CONTRACTUAL BREACH, FUNDAMENTAL BREACH, TORT OR OTHERWISE, OR FROM ANY ACTS OR OMISSIONS. LGECI’S TOTAL LIABILITY, IF ANY, SHALL NOT EXCEED THE PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
This Limited Warranty gives you specific legal rights. You may also have other rights that vary from province to province depending on applicable provincial laws. Any term of this Limited Warranty that negates or varies any implied condition or warranty under provincial law is severable where it conflicts with such provincial law without affecting the remainder of this warranty’s terms.
THIS LIMITED WARRANTY DOES NOT COVER:
· Service trips to i) deliver, pick up, or install or; educate on how to operate the Product; ii) correct wiring or plumbing; or iii) correct unauthorized repairs or installations of the Product;
· Damage or failure of the Product to perform during power failures and interrupted or inadequate electrical service;

ENGLISH

en-us_main.book.book Page 45 Tuesday, October 17, 2023 9:43 AM
LIMITED WARRANTY 45
· Damage or failure caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted water supply or inadequate supply of air;
· Damage or failure resulting from operating the Product in a corrosive atmosphere or contrary to the instructions outlined in the Product’s owner’s manual;
· Damage or failure to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, acts of God, or any other causes beyond the control of LGECI or the manufacturer;
· Damage or failure resulting from misuse, abuse, improper installation, repair, or maintenance of the Product. Improper repair includes use of parts not authorized or specified by LGECI. Improper installation or maintenance includes installation or maintenance contrary to the Product’s owner’s manual;.
· Damage or failure caused by unauthorized modification or alteration of the Product, or if used for other than the intended household purpose/use of the Product, or damage or failure resulting from any water leakage due to improper installation of the Product;
· Damage or failure caused by incorrect electrical current, voltage or plumbing codes; · Damage or failure caused by use that is other than normal household use, including, without limitation,
commercial or industrial use, including use in commercial offices or recreational facilities, or as otherwise outlined in the Product’s owner’s manual; · Damage or failure caused by the use of any accessories, components or cleaning products, including, without limitation, water filters, that are not approved/authorized by LGECI; · Damage or failure caused by transportation and handling, including scratches, dents, chips and/or other damage to the finish of the Product, unless such damage results from defects in materials or workmanship and is reported to LGECI within one (1) week of delivery of the Products; · Damage or missing items to any display, open box, refurbished or discounted Product; · Refurbished Product or any Product sold “As Is”, “Where Is”, “With all Faults”, or any similar disclaimer; · Products with original serial numbers that have been removed, altered or cannot be readily determined at the discretion of LGECI; · Increases in utility costs and additional utility expenses in any way associated with the Product; · Any noises associated with normal operation of the Product; · Replacement of any part that was not originally included with the Product; · Replacement of light bulbs, filters, fuses or any other consumable parts; · Costs associated with removal and/or reinstallation of the Product for repairs; and · Shelves, door bins, drawers, handle and accessories to the Product, except for internal/functional parts covered under this Limited Warranty. · Coverage for “in Home” repairs, for products in-warranty, will be provided if the Product is within a 150 km radius from the nearest authorized service center (ASC), as determined by LG Canada. If your Product is located outside a 150 km radius from a ASC, as determined by LG Canada, it will be your responsibility to bring the Product, at your sole expense, to the ASC for in-warranty repair. All costs and expenses associated with the above excluded circumstances, listed under the heading, This Limited Warranty Does Not Cover, shall be borne by the consumer. TO OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION, PLEASE CALL OR VISIT OUR WEBSITE: Call 1-888-542-2623 (7 A.M. to 12 A.M., 365 days a year) and select the appropriate option from the menu, or visit our website at http://www.lg.com
PROCEDURE FOR RESOLVING DISPUTES:
EXCEPT WHERE PROHIBITED AT LAW, ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION. EXCEPT WHERE PROHIBITED AT LAW, YOU AND LG BOTH IRREVOCABLY AGREE TO WAIVE THE RIGHT TO A JURY TRIAL AND TO BRING OR PARTICIPATE IN A CLASS ACTION.

en-us_main.book.book Page 46 Tuesday, October 17, 2023 9:43 AM
46 LIMITED WARRANTY
Definitions. For the purposes of this section, references to “LG” mean LG Electronics Canada, Inc., its parents, subsidiaries and affiliates, and each of their officers, directors, employees, agents, beneficiaries, predecessors in interest, successors, assigns and suppliers; references to “dispute” or “claim” shall include any dispute, claim or controversy of any kind whatsoever (whether based in contract, tort, statute, regulation, ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or relating in any way to the sale, condition or performance of the product or this Limited Warranty.
Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LGECI Legal Team at 20 Norelco Drive, North York, Ontario, Canada M9L 2X6 (the “Notice of Dispute”). You and LG agree to engage in good faith discussions in an attempt to amicably resolve your claim. The notice must provide your name, address, and telephone number; identify the product that is the subject of the claim; and describe the nature of the claim and the relief being sought. If you and LG are unable to resolve the dispute within 30 days of LG’s receipt of the Notice of Dispute, the dispute shall be resolved by binding arbitration in accordance with the procedure set out herein. You and LG both agree that, during the arbitration proceeding, the terms (including any amount) of any settlement offer made by either you or LG will not be disclosed to the arbitrator until the arbitrator determines the dispute.
Agreement to Binding Arbitration and Class Action Waiver. Upon failure to resolve the dispute during the 30 day period after LG’s receipt of the Notice of Dispute, you and LG agree to resolve any claims between you and LG only by binding arbitration on an individual basis, unless you opt out as provided below, or you reside in a jurisdiction that prevents full application of this clause in the circumstances of the claims at issue (in which case if you are a consumer, this clause will only apply if you expressly agree to the arbitration). To the extent permitted by applicable law, any dispute between you and LG shall not be combined or consolidated with a dispute involving any other person’s or entity’s product or claim. More specifically, without limitation of the foregoing, except to the extent such a prohibition is not permitted at law, any dispute between you and LG shall not under any circumstances proceed as part of a class or representative action. Instead of arbitration, either party may bring an individual action in small claims court, but that small claims court action may not be brought on a class or representative basis except to the extent this prohibition is not permitted at law in your province or territory of jurisdiction as it relates to the claims at issue between you and LG.
Arbitration Rules and Procedures. To begin arbitration of a claim, either you or LG must make a written demand for arbitration. The arbitration will be private and confidential, and conducted on a simplified and expedited basis before a single arbitrator chosen by the parties under the provincial or territorial commercial arbitration law and rules of the province or territory of your residence. You must also send a copy of your written demand to LG at LG Electronics, Canada, Inc., Attn: Legal Department- Arbitration, 20 Norelco Drive, North York, Ontario M9L 2X6. This arbitration provision is governed by your applicable provincial or territorial commercial arbitration legislation. Judgment may be entered on the arbitrator’s award in any court of competent jurisdiction. All issues are for the arbitrator to decide, except that, issues relating to the scope and enforceability of the arbitration provision and to the arbitrability of the dispute are for the court to decide. The arbitrator is bound by the terms of this provision.
Governing Law. The law of the province or territory of your purchase shall govern this Limited Warranty and any disputes between you and LG except to the extent that such law is preempted by or inconsistent with applicable federal or provincial/territorial law. Should arbitration not be permitted for any claim, action, dispute or controversy between you and LG, you and LG attorn to the exclusive jurisdiction of the courts of the province or territory of your purchase for the resolution of the claim, action, dispute or controversy between you and LG.
Fees/Costs. You do not need to pay any fee to begin an arbitration. Upon receipt of your written demand for arbitration, LG will promptly pay all arbitration filing fees unless you seek more than $25,000 in damages, in which case the payment of these fees will be governed by the applicable arbitration rules. Except as otherwise provided for herein, LG will pay all filing, administration and arbitrator fees for any arbitration initiated in accordance with the applicable arbitration rules and this arbitration provision. If you prevail in the arbitration, LG will pay your attorneys’ fees and expenses as long as they are reasonable, by considering factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the foregoing, if applicable law allows for an award of reasonable attorneys’ fees and expenses, an arbitrator can award them to the same extent that a court would. If the arbitrator finds either the substance of your claim or the relief sought in the demand is frivolous or brought for an improper purpose (as measured by the applicable laws), then the payment of all arbitration fees will be governed by the applicable arbitration rules. In such a situation, you agree to reimburse LG for all monies previously disbursed by it that are otherwise your obligation to pay under the applicable arbitration rules. Except as

ENGLISH

en-us_main.book.book Page 47 Tuesday, October 17, 2023 9:43 AM
LIMITED WARRANTY 47
otherwise provided for, LG waives any rights it may have to seek attorneys’ fees and expenses from you if LG prevails in the arbitration.
Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration conducted solely (1) on the basis of documents submitted to the arbitrator, (2) through a telephonic hearing, or (3) by an in-person hearing as established by the applicable arbitration rules. If your claim exceeds $25,000, the right to a hearing will be determined by the applicable arbitration rules. Any inperson arbitration hearings will be held at the nearest, most mutually-convenient arbitration location available within the province or territory in which you reside unless you and LG both agree to another location or agree to a telephonic arbitration.
Severability and Waiver. If any portion of this Limited Warranty (including these arbitration procedures) is unenforceable, the remaining provisions will continue in full force and effect to the maximum extent permitted by applicable law. Should LG fail to enforce strict performance of any provision of this Limited Warranty (including these arbitration procedures), it does not mean that LG intends to waive or has waived any provision or part of this Limited Warranty.
Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by either (i) sending an e-mail to optout@lge.com, with the subject line: “Arbitration Opt Out;” or (ii) calling 1800-980-2973. You must include in the opt out e-mail or provide by telephone: (a) your name and address; (b) the date on which the product was purchased; (c) the product model name or model number; and (d) the serial number (the serial number can be found (i) on the product; or (ii) online by accessing https:// www.lg.com/ca_en/support/repair- service/schedule-repair and clicking on “Find My Model & Serial Number”).
In the event that you “Opt Out”, the law of the province or territory of your residence shall govern this Limited Warranty and any disputes between you and LG except to the extent that such law is preempted by or inconsistent with applicable federal or provincial/territorial law. Should arbitration not be permitted for any claim, action, dispute or controversy between you and LG, you and LG agree to attorn to the exclusive jurisdiction of the courts of the province or territory of your residence for the resolution of the claim, action, dispute or controversy between you and LG.
You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure. Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any way, and you will continue to enjoy the full benefits of the Limited Warranty. If you keep this product and do not opt out, then you accept all terms and conditions of the arbitration provision described above.
Conflict of Terms. In the event of a conflict or inconsistency between the terms of this Limited Warranty and the End User License Agreement (“EULA”) in regards to dispute resolution, the terms of this Limited Warranty shall control and govern the rights and obligations of the parties and shall take precedence over the EULA.

en-us_main.book.book Page 48 Tuesday, October 17, 2023 9:43 AM
48 Memo

es-us_main.book.book Page 1 Tuesday, October 17, 2023 9:38 AM

Escanee el código QR para ver el manual.

MANUAL DEL PROPIETARIO
PLACA DE COCCIÓN POR INDUCCIÓN DE CERÁMICA VIDRIADA
Lea el manual del propietario detenidamente previo a operar el electrodoméstico y mantengalo al alcance para futuras referencias.
ESPAÑOL CBIS3618BE
www.lg.com
Copyright © 2022-2023 LG Electronics Inc. Todos los derechos reservados

es-us_main.book.book Page 2 Tuesday, October 17, 2023 9:38 AM

References

• LG Open Source
• LG Electronics & Home Appliances | Shop Now | LG USA
• Request Product Repair Service | LG USA Support
• LG Open Source
• Aide et soutien à la clientèle LG | LG CA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>