dji Mavic Pro Battery Charging Hub User Guide
- June 13, 2024
- DJi
Table of Contents
Mavic Pro Battery Charging Hub
User Guide
Disclaimer
Thank you for purchasing the MAVICTM Battery Charging Hub (hereinafter
referred to as “Product”). Read this disclaimer carefully before using this
Product. By using this Product, you hereby agree to this disclaimer and
signify that you have read it fully. Please use this Product in strict
accordance with the manual and be sure to pay attention to the Warnings. SZ
DJI TECHNOLOGY CO., LTD. and its affiliated companies assume no liability for
damage(s) or injuries incurred directly or indirectly from improper use of
this Product. Misuse includes, but is not limited to, using unapproved
chargers, charging unapproved batteries, short- circuiting, overheating,
introducing foreign materials into the Product, or touching the terminals with
skin or metal. Refer to the Safety Guidelines and Disclaimer, Intelligent
Flight Battery Safety Guidelines, and User Manual for applicable information
not herein contained.
DJITM is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and
its affiliated companies. Names of products, brands, etc., appearing in this
manual are trademarks or registered trademarks of their respective owner
companies. This Product and manual are copyrighted by DJI with all rights
reserved. No part of this Product or manual shall be reproduced in any form
without the prior written consent or authorization of DJI.
This disclaimer is produced in various languages. In the event of divergence
among different versions, the Simplified Chinese version shall prevail when
the Product in question is purchased in China, and English version shall
prevail when the Product in question is purchased in any other region.
Warnings
-
The Charging Hub is only compatible with the designated Battery
Do not attempt to use the Charging Hub with any other battery charger. -
The Charging Hub is only compatible with FB1-3830mAh-11.4V Intelligent Flight Do not attempt to use the Charging Hub with other battery models.
-
Place the Charging Hub on a flat and stable surface when in Ensure the device is properly insulated to prevent fire hazards.
-
DO NOT attempt to touch the metal terminals on the Charging
-
Clean the metal terminals with a clean, dry cloth if there is any noticeable
Introduction
The Mavic Battery Charging Hub is designed for use with the Mavic Intelligent Flight Battery. When used with the Mavic Battery Charger, it can charge up to four Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged in sequence according to their power levels, from high to low. The Charging Hub (Advanced) optimizes charging to improve efficiency. It is also Phantom 4 charger compatible, further reducing the charging time.
Overview
- Status LED Indicator
- Battery Port
- Firmware Update Port (Micro USB Slot)
- Power Port
Using the Charging Hub
Follow the instructions below to use the Charging Hub:
-
Connecting to a Power Source
Connect the Mavic Battery Charger to a power outlet (100-240V, 50-60Hz), then connect the Charging Hub to the Mavic Battery Charger.
The Charging Hub (Advanced, model: M1CH-P) can also be
connected to the Phantom 4 Charger. -
Connecting Batteries
Insert the Intelligent Flight Battery into the battery port to begin charging. The Intelligent Flight Battery with the highest power level will be charged first, then batteries will be charged in sequence according to their power levels. The Charging Hub (Advanced) charges batteries in stages, making charging multiple batteries faster.
Refer to “Status LED Indicator Description” section for more information about the Status LED indicator’s blinking patterns. Unplug the batteries when they are fully charged.
Be aware of the Charging Hub model. DO NOT connect the Charging Hub (Model:
M1CH-S) to the Phantom 4 Charger
DO NOT cover the Charging Hub during charging.
Status LED Indicator Descriptions
| Status LED Indicator | Descriptions |
|---|---|
| Slow Pulsing Green | Charging |
| v | All batteries are fully charged |
| Solid Yellow | Waiting to charge |
| Solid Red | Power supply or battery error. Check components |
Updating the Firmware
The Charging Hub can be updated using the firmware update program. If no
firmware update program is released on the Downloads page of the official DJI
website, it indicates that the product firmware is up-to-date and no update is
required.
Specifications
| Model | M1CH-S; M1CH-P (Advanced) |
|---|---|
| Compatible Battery Charger | Mavic Charger (F1C50) Mavic Car Charger (C3S78) |
Phantom 4 Charger (PH4C100, Advanced only) Phantom 4 Car Charger (C4S90-4,
Advanced only)
Compatible Battery Model| FB1-3830mAh-11.4V
Operating Temperature| 41° to 104° F (5° to 40° C)
Operating Voltage| 13.05 V (Connected with the Mavic Charger / Car Charger)
17.4 V (Connected with the Phantom 4 Charger / Car Charger)
Charge Time* (Four Batteries)| Mavic Charging Hub: M1CH-S
5 hr 10 min (Mavic Charger) 4 hr (Mavic Car Charger)
Mavic Charging Hub (Advanced): M1CH-P
4 hr 10 min (Mavic Charger)
3 hr 15 min (Mavic Car Charger)
2 hr 30 min (Phantom 4 Charger / Car Charger)
Weight 82 g; 101 g (Advanced)
- Charge times are tested in a lab environment at room temperature and should be used for reference only.
**Compliance Information
**
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
EU Compliance Statement
SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance
with the essential requirements and other relevant provisions of the EMC
Directive.
A copy of the EU Declaration of Conformity is available online at www.dji.com
/euro-compliance
EU contact address: DJI GmbH, Industrie Strasse. 12, 97618, Niederlauer,
Germany
IC Compliance
This device complies with ICES-003 standard. Operation is subject to the
following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
DJI Support
http://www.dji.com/support
If you have any questions about this document, please contact DJI by sending a
message to
DocSupport@dji.com.
The content in this document is subject to change. Download the latest version
from
http://www.dji.com/mavic
MAVICTM is a trademark of DJI.
Copyright © 2016 DJI All Rights Reserved.
Printed in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>