Pyramid 5071WP Indoor/Outdoor Waterproof Speaker System User Manual
- June 3, 2024
- PYRAMID
Table of Contents
Pyramid 5071WP Indoor/Outdoor Waterproof Speaker System
Specification
- BRAND: Pyramid
- SPEAKER TYPE: Outdoor
- SUBWOOFER DIAMETER: 5 Inches
- MOUNTING TYPE: Wall Mount
- COLOR: 5071wp
- MAGNET STRUCTURE: 50 oz.
- ITEM WEIGHT: 0.32 ounces
- PRODUCT DIMENSIONS: 02 x 15.08 x 12.64 inches
- POWER RANGE: 25-500 Watts
- FREQUENCY RESPONSE: 30-22K Hz
- IMPEDANCE: 4 Ohms
Introduction
It is Excellent For Use Outside, On Decks, Patios, Poolside, Marinas, Etc. it is a Fully Waterproof 6.5-Inch 50-Ounce Aluminum Injection Cone Woofer Structure with High Compliance 1-Inch Heavy Duty ABS Construction with a Mylar Tweeter Capacitor Crossover Network for Added Bass Response Terminals for Quick Connect Speakers and Removable Rustproof Mesh Grills with a Special Spring Loaded Mounting System.
HOW IN-WALL SPEAKERS WORK
In-wall speakers only affect the quality of the sound in one way: their restricted depth and width limit the cabinet’s volume to that which can be adjusted by adjusting the enclosure’s height. Even some in-wall speakers use “infinite baffle” designs, in which the wall acts as the speaker box.
HOW TO KNOW IF WALL SPEAKERS WORK
Lightly contact the speaker wire to the battery using a battery and the other end of the wire. A positive sign is when you hear noise. Check to see whether everything is connected correctly before trying again with a different cable if you can’t hear anything.
HOW TO CONNECT TO TV
Use an RCA jack on the speaker end and a 3.5mm audio jack on the TV end. You can utilize a 3.5mm to 3.5mm cable if your speakers’ input interface is also 3.5mm (rather than RCA connectors).
FAQs
Do I need the ceiling mount to use the speaker?****
Yes. Although the speaker can be unscrewed from the ceiling mount, I haven’t tried it because there might be adhesive sealing the speaker’s rim.
Are receivers required for in-wall speakers?****
Speakers installed in walls and ceilings are typically passive speakers. They are thus not required to be connected to a power source. They just require a connection to a receiver or amplifier that can also serve as a power supply.
Are receivers required for in-wall speakers?****
Speakers installed in walls and ceilings are typically passive speakers. They are thus not required to be connected to a power source. They just require a connection to a receiver or amplifier that can also serve as a power supply.
Is standard speaker cable allowed in walls?****
Use only wire that is approved for installation inside walls. A CL2 or CL3-rated speaker wire is what you want to buy. For installation in plenum- rated airspace above a drop ceiling in a commercial building, wire-rated CL2P or CL3P is required. If you’re putting cable through the ground to outdoor speakers, it should be direct burial rated.
Why must speakers be set back from a wall?****
If at all feasible, keep your speakers away from the walls because sound waves might be affected by reflections off of nearby objects.
What safety measures need to be taken when installing insulation?****
To prevent eye irritation, wear goggles and a head covering. gloves and long- sleeved, baggy clothing to reduce skin contact.
is this a wireless or Bluetooth speaker?****
No, it is not wireless.
Can these speakers handle a 3,000-watt stereo? I wanted to hook up 4 of these speakers outside****
You need to know how many watts you will be pushing per channel and the resistance (ohms). Are you running at 4 ohms per channel? If so, that will fry these puppies. But, it shouldn’t damage your amp, so you can always try it if you have the cash to spare. If I were you, I would contact the manufacturer.
I need individual speaker dimensions to mount on the camper. The #’s given sound like box size.****
Each individual speaker measures 10 1/2 inches high by 7 1/2 inches wide by 6 inches deep. We’re very happy with our speakers…use them in our outdoor sunroom.
Hello, are the speaker boxes white on the pyramid 5071wp 500 watts?****
they are white. Originally, I ordered 2 pairs. 1 pair had a loose magnet and they quickly send a replacement pair. I use them in a boat and they sound pretty good.
Do these come as a Pair?****
Yes, but one stopped working two weeks later.
Can I buy and hook up two pairs (four speakers total) together?****
Yes, you as long as your amplifier can handle the load.
would a 100-watt-per-channel high-current Harman Kardon not have enough power to push these****
Yes, they are inefficient but 100 watts should be fine
Is the connection with an MP3 player or a USB stick possible? And is it possible to run them on battery mode without an electricity connection? Thanks****
These speakers are not self-powered nor have a complete sound system, so this question is not really appropriate for asking on a set of speakers that requires other components. (The only input ports in the back are speaker wire inputs.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>