ViewSonic PA503W DLP Projector User Guide

: June 3, 2024
: Viewsonic

Table of Contents

Package Content
Cable Connection
Wiring Instruction
Functional Description
Dimension Overall
FCC Compliance Statement
Conformity for European Countries
Declaration of RoHS2 Compliance
Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ViewSonic PA503W DLP Projector User Guide

Package Content

Cable Connection

Wiring Instruction

Functional Description

Dimension Overall

Screws: M4 x 8 (Max. L = 8 mm) Unit: mm
Dimension

16:10 image on a 16:10 screen

16:10 image on a 4:3 screen
Dimension
(e): Screen (f): Center of lens

(a) Screen Size	16:10 image on a 16:10 Screen
(b) Projection distance	(c) Image height
min.	max.
inch	mm
60	1524
70	1778
80	2032
90	2286
100	2540
110	2794
120	3048
130	3302
140	3556
150	3810
160	4064
170	4318
180	4572
(a) Screen Size	16:10 image on a 4:3 Screen
---	---
(b) Projection distance	(c) Image height
min.	max.
inch	mm
60	1524
70	1778
80	2032
90	2286
100	2540
110	2794
120	3048
130	3302
140	3556
150	3810
160	4064
170	4318
180	4572

There is 3% tolerance among these numbers due to optical component variations. It is recommended that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this projector’s optical characteristics. This will help you determine the exact mounting position so that it best suits your installation location.

FCC Compliance Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Industry Canada ICES-003 Compliance: CAN ICES-003(B) / NMB-003(B)

Conformity for European Countries

The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU.

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) .