ViewSonic VS18678 ID710 ViewBoard Pen Display User Guide

ViewSonic VS18678 ID710 ViewBoard Pen Display

Overview

Specifications

• Model Name VS18678
• Dimensions 8.35 x 5.56 x 0.86 (in.)
• Weight 352 g +10% (0.75 Ib.)

LCD

• Active Area 6.07″ x 3.38″ (7″)
• Resolution 1024X 600

Pen

• Pen Battery Free
• Pressure Level 8192
• Pen resolution 5080 LPI
• Reading Speed 250 PPS
• Diameter 7.9mm 0.1mm (0.31 in.)

Connector

• Interface Type C
  Input 5V/ 2A

System Requirements

• Windows: 7/8/10 or above
• macOS: 10.15 or above

Operating Condition

• Temperature 32°F to 104°F (0-40°C)
• Humidity 30%~80%

Connection

USB-C to USB-A

1. Connect the USB-C end of the cable to the ID710.
2. Connect the USB-A end of the cable to your PC/ Mac /Chromebook.

Package Contents

• ID710 ViewBoard Pen Display x 1
• ViewSonic Stylus x 1
• Pen Nib x 3
• Nib Remover x 1
• USB-C to USB-A Cable x 1
• Quick Start Guide x 1

Setting Up

Before Installing

1. Uninstall and completely remove drivers of other graphic tablets/monitors that may be installed on your device.
2. Temporarily disable any anti-virus software and/or firewalls.
3. Make sure you are installing the driver as an administrator.

Installation

• Download and install the drivers from: https://www.viewsonic.com/global/products/pendisplay/lID710-BWW.
• Install DisplayLink display adapter driver and Pen Manager driver.
• After a successful installation, reboot the computer.
• Plug in the ID710 and the system will show the “ViewSonic Pen Manager” icon in the system tray.

Replacing the Pen Nibs

1. Pull out the pen nib from the pen by using the nib removal tool.
2. Insert a new nib and push it into the pen.

Support Options

1. Visit ViewSonic https://www.viewsonic.com/global/support/downloads. for driver updates, user manuals, and FAQs.
2. Click “contact us” to send your inquiry.

Official Website

1. Viewsonic https://www.viewsonic.com/us/
2. ViewSonic PenDisplay https://pendisplay.viewsonic.com/.

Important Information

1. The user manual is available on the ViewSonic product page. It provides detailed information about using and customizing your ID710.
2. Check the FAQ if you have any questions about your ID710.
3. Driver updates for your ID710 can be found at: https://www.viewsonic.com/global/products/pendisplay/ID710-BWW.

Warning

Warning: Choking Hazard

• This device may contain small parts which may be a choking hazard to children under 3.
• Keep small parts away from children.

This device complies with Part 15 of the FCC rules
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>