ViewSonic VPC33 Direct View LED Displays User Guide

: May 15, 2024
: Viewsonic

Table of Contents

ViewSonic VPC33 Direct View LED Displays
FAQ
Introduction
Product Overview
Initial Setup
Making Connections
Using the Device
Appendix
FCC Compliance Statement
Customer Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ViewSonic VPC33 Direct View LED Displays

ViewSonic-VPC33-Direct-View-LED-Displays-product

Specifications

Model Numbers: VPC33, VPC35, VPC37
Model No.: VS19693
Package Contents: Slot in PC module, Quick Start Guide

Product Overview

The VPC33, VPC35, and VPC37 are slot-in PC modules designed for use with compatible displays. They offer various input and connection options for enhanced functionality.

Key Features:

Wi-Fi Antenna Interface
RJ45 Internet Connection Port
DisplayPort Input
USB 3.0 Port
Reset Button
Power Button with Status LED
HDMI Input
USB Type C Input (Data Only)
Audio Out and Microphone Connections

Initial Setup

Installing the VPC33/VPC35/VPC37

Remove the slot-in PC cover of the display.
Carefully insert the VPC33/VPC35/VPC37 into the PC slot of the display.

Making Connections

Network Connection

To connect to the Internet or a network:

Connect one end of an RJ45 cable to the RJ45 port of the VPC33/VPC35/VPC37.
Connect the other end of the cable to your network.

Using the Device

Selecting an Input Source

The VPC33/VPC35/VPC37 can work with various series such as IFP Series and CDE Series.

IFP Series:

Detailed instructions on using the device with IFP Series displays.

CDE Series:

Detailed instructions on using the device with CDE Series displays.

Appendix

Regulatory and Service Information

Important regulatory and service details related to the VPC33, VPC35, and VPC37.

Copyright Information

Information regarding copyright for the product.

Customer Service

Contact information for customer support.

FAQ

Q: What should I do if something is missing or damaged in the package?

A: If anything is missing or damaged, please contact your local reseller for more information.

IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our website at http://www.viewsonic.com in English, or in specific languages using the Regional selection box of our website

Thank you for choosing ViewSonic®

As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well. Once again, thank you for choosing ViewSonic

Introduction

Package Contents $ViewSonic-VPC33-Direct-View-LED-Displays-fig $1$$

NOTE: If anything is missing or damaged, please contact your local reseller for more information

Product Overview

$ViewSonic-VPC33-Direct-View-LED-Displays-fig $2$$ $ViewSonic-VPC33-Direct-View-LED-Displays-fig $3$$

Initial Setup

Installing the VPC33/VPC35/VPC37

Remove the slot-in PC cover of the display $ViewSonic-VPC33-Direct-View-LED-Displays-fig $4$$
Carefully insert the VPC33/VPC35/VPC37 into the PC slot of the display. $ViewSonic-VPC33-Direct-View-LED-Displays-fig $5$$
Secure the VPC33/VPC35/VPC37 to the display with the two (2) screws.
NOTE:
- Please note that the two (2) antennas must be installed on the VPC33/VPC35/VPC37.
- Please pay attention to the installation direction of the VPC33/VPC35/VPC37, with the vents facing outwards to avoid damage.

Making Connections

Network Connection

To connect to the Internet or a network, connect one end of a RJ45 cable to the RJ45 ( ) port of the VPC33/VPC35/VPC37, then connect the other end to your network. $ViewSonic-VPC33-Direct-View-LED-Displays-fig $7$$

USB Connection

USB peripherals such as keyboards, mice, storage devices, etc. can be connected to the VPC33/VPC35/VPC37’s USB ports. $ViewSonic-VPC33-Direct-View- LED-Displays-fig $8$$

Using the Device

Selecting an Input Source

IFP Series $ViewSonic-VPC33-Direct-View-LED-Displays-fig $9$$

To select an input source:

Press on the remote control, press the setting button on the front panel, or press the Settings icon from the toolbar to display the Input Settings menu.
Press ▼/▲/◄/► on the remote control to select the PC source.
Press OK/ENTER on the remote control, or touch the input source directly.
Press $ViewSonic-VPC33-Direct-View-LED-Displays-fig $12$$ on the remote control, or touch a blank area outside of the menu to exit.
NOTE: The above image is for reference only and is subject to change without notice

CDE Series

To select an input source:

Press on the remote control.
Press ▼/▲ on the remote control to select the PC source.
Press OK/ENTER on the remote control.
Press $ViewSonic-VPC33-Direct-View-LED-Displays-fig $12$$ on the remote control to exit.

NOTE: The above image is for reference only and is subject to change without notice.

Appendix

Specifications

Category	Item	Specifications

I/O

| ****

Ports

| 1 x LAN

1 x Display Port 1 x HDMI

4 x USB 3.0

1 x USB type C 1 x Earphone

1 x Microphone

Physical

Operating Conditions

| Altitude| 0~3,048 M (10,000 ft.)
Humidity| 10% ~ 90% (non-condensing)
Temperature| -5°C ~ 40°C (23°F ~ 104°F)

Storage Conditions

Wi-Fi Module

| ****

Form Factor

| Wi-Fi 6 (IEEE 802.11 a/b/g/n/ac/ax Wi-Fi 2T/2R+)
Bluetooth 5.2 (V2.1/4.2/5.2 USB2.0/3.0 Module)

Frequency Range and Output Power (Max.)

| • 2402 to 2480 MHz(BT) (5.5dBm)

• 2402 to 2480 MHz(LE) (3.73 dBm)

• 2412 to 2472 MHz (17.41 dBm) (14.38dbm)

• 5150 to 5250 MHz (18.94 dBm) (13.25dbm)

• 5250 to 5350 MHz (18.94 dBm) (13.25dbm)

• 5470 to 5725 MHz (18.94 dBm) (12.75dbm)

Regulatory and Service Information

Compliance Information

This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.

FCC Compliance Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Industry Canada Statement

FCC ID: PD9AX200NG
IC ID: 1000M-AX200NG
CAN ICES-003(B) / NMB-003(B)

CE Conformity for European Countries

The device complies with the EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and Radio Equipment Directive 2014/53/EU.

https://www.viewsonicglobal.com/public/products_download/safety_compliance/acc/VS19693_CE_DoC.pdf

The following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below

Substance| Proposed Maximum

Concentration

| Actual

Concentration

---|---|---
Lead (Pb)| 0.1%| < 0.1%
Mercury (Hg)| 0.1%| < 0.1%
Cadmium (Cd)| 0.01%| < 0.01%
Hexavalent Chromium (Cr6⁺)| 0.1%| < 0.1%
Polybrominated biphenyls (PBB)| 0.1%| < 0.1%
Polybrominated diphenyl ethers (PBDE)| 0.1%| < 0.1%
Bis(2-ethylhexyl) phthalate (DEHP)| 0.1%| < 0.1%
Butyl benzyl phthalate (BBP)| 0.1%| < 0.1%
Dibutyl phthalate (DBP)| 0.1%| < 0.1%
Diisobutyl phthalate (DIBP)| 0.1%| < 0.1%

Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below:

Copper alloy containing up to 4% lead by weight.
Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectric devices, or in a glass or ceramic matrix compound.
Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC or higher.

Indian Restriction of Hazardous Substances

Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Product Disposal at End of Product Life

ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more.

USA & Canada:

https://www.viewsonic.com/us/go-green-with-viewsonic

Europe:

https://www.viewsonic.com/eu/go-green-with-viewsonic

Taiwan:

https://recycle.epa.gov.tw/

Copyright Information

Copyright© ViewSonic® Corporation, 2023. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic® Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA. Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.