ViewSonic PJ-WPD-700 Wireless Screen Casting Kit User Guide

: May 15, 2024
: Viewsonic

Table of Contents

ViewSonic PJ-WPD-700 Wireless Screen Casting Kit
Product Overview
Introduction
Product Overview
Making Connections
Appendix
Product Dimensions
Regulatory and Service Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ViewSonic PJ-WPD-700 Wireless Screen Casting Kit

ViewSonic-PJ-WPD-700-Wireless-Screen-Casting-Kit-
product

Specifications

Model: VS19836
Product Name: PJ-WPD-700
Receiver Dimensions: 9 x 5 x 2 inches
Transmitter Dimensions: 6 x 3 x 1 inches

Product Overview

The receiver is equipped with HDMI1 output and USB A2 input.
HDMI1 output is version 1.4, designed to connect to a projection device.
The USB A2 input is for power input only (5V/0.5A).

Transmitter

The transmitter features USB C3 input for display input, connecting to casting devices like laptops, mobile phones, or tablets.
It also includes a pairing button for pairing and a reset button to reset the device to the factory default settings.
The LED indicator shows power and connection status.

Making Connections

Connect the Receiver’s HDMI Output to an HDMI port of the projector. Make sure the projector is turned ON.
Plug the Receiver’s USB A Input into the USB A port of the projector providing 5V/0.5A power.

FAQ

Q: What should I do if any component is missing or damaged in the package?

A: If anything is missing or damaged, please contact your local reseller for further assistance.

Thank you for choosing ViewSonic®

As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity.
At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
Once again, thank you for choosing ViewSonic®!

Introduction

Package Contents

NOTE: If anything is missing or damaged, please contact your local reseller for more information.

Product Overview

Receiver

Number	Item	Description
1	HDMI 1 Output	Version 1.4; connect to a projection device.
2	USB A 2 Input	For power input only (5V/0.5A).
3	Reset	For pairing and resetting to default settings.

Transmitter

Number	Item	Description
1	USB C 3 Input	Display input; connect to the casting device

(e.g., laptop,

mobile phone, tablet).

**2| ****Pair Button**| • Press to turn to cast ON/OFF as the display signal is transmitting.

• Press and hold for five (5) seconds to enter the pairing mode (if needed)

3| Reset Button| Press and hold for five (5) seconds to reset the device to factory default settings.
4| LED Indicator| Indicates the power and connection status.

Compatible with HDMI 1.4
Compatible with USB A
Compatible with USB C. Ensure your device supports video output and power delivery via USB C port (DisplayPort Alternative Mode on USB C)

Making Connections

Connecting the Receiver

Connect the Receiver’s HDMI Output to an HDMI port of the projector.
- NOTE: Ensure the projector is also turned ON.
Plug the Receiver’s USB A Input into the USB A port of the projector that can provide 5V/0.5A power.

Connecting the Transmitter

Connect the Transmitter’s USB C Input to a USB C port of the casting device (e.g. laptop, mobile phone, tablet).
Once connected, the Transmitter’s LED Indicator will flash for a few seconds and then stop. At this time, the casting device’s screen will cast automatically.
Pressing the Pair Button will toggle casting ON/OFF while the casting device is transmitting.

NOTE:

Ensure your device supports video output and power delivery via USB C port (DisplayPort Alternative Mode on USB C).
Casting is supported for all laptops, including those running Windows and macOS, as well as Android and Apple devices with DP Alt output.
Duplicate and Extend modes for Windows/macOS systems are supported.
To reset to default settings, press the Reset Button for five (5) seconds.
Genuine HDCP (High-bandwidth Digital Content Protection) for DRM (Digital Rights Management) streaming is supported.

Appendix

Specifications

Category	Specifications
Function	Transmitter
Wi- Fi	5 GHz 1T1R
HDCP Support	HDCP 1.4
Video support	up to 1080p @ 60 Hz
Audio support	2 channels, PCM

Physical Buttons| Specifications
Pair Button| 1| 1 (Pinhole)
Reset Button| 1| N/A

(6.69” x 1.57” x 0.63”)

| 677 x 17 x 6 mm

(26.65” x 0.67” x 0.24”)

Weight| 37.5 g (0.08 lbs)| 19 g

(0.04 lbs)

Operating Temperature| 0° C to 35° C.

(32° F to 95° F)

Operating Humidity| 10% to 90% (non-condensing)

LED Indicator Transmitter

Light	Description
Solid White	The Transmitter is connected to the Receiver successfully

and is operating normally.
Flashing (Slowly)| The Transmitter is ready to pair with the Receiver when the

receiver is powered up.

Flashing (Quickly)| The Transmitter is connecting with the Receiver.
Off| The Transmitter is not working properly, or there is no power input.

Product Dimensions

Transmitter

Receiver

Regulatory and Service Information

Compliance Information

This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.

FCC Compliance Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference,
this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
The user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

SAR statement

This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The SAR limit set by the FCC is 1.6W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 0mm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified. And use of such body-worn accessories should be avoided. Accessory available in the market and must be used to keep use distance 0mm from EUT to body-worn operation.

VS19859 FCC ID: GSSVS19859
VS19836 FCC ID: GSSVS19836

IC Warning Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference,
this device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement

This equipment complied with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
The device for the band 5150-5825 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems.
Radiation Exposure: This equipment complies with Canada’s radiation Exposure limits set forth for an uncontrolled environment to maintain compliance with IC’s RF Exposure guidelines. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

VS19859 IC ID: 4280A-VS19859
VS19836 IC ID: 4280A-VS19836

CE Conformity for European Countries

The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. Radio Equipment Directive 2014/53/EU.

The following information is only for EU-member states:

The mark shown to the right complies with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance| Proposed Maximum Concentration| Actual Concentration
---|---|---
Lead (Pb)| 0.1%| < 0.1%
Mercury (Hg)| 0.1%| < 0.1%
Cadmium (Cd)| 0.01%| < 0.01%
Hexavalent Chromium (Cr6⁺)| 0.1%| < 0.1%
Polybrominated biphenyls (PBB)| 0.1%| < 0.1%
Polybrominated diphenyl ethers (PBDE)| 0.1%| < 0.1%
Bis(2-ethylhexyl) phthalate (DEHP)| 0.1%| < 0.1%
Butyl benzyl phthalate (BBP)| 0.1%| < 0.1%
Dibutyl phthalate (DBP)| 0.1%| < 0.1%
Diisobutyl phthalate (DIBP)| 0.1%| < 0.1%

Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below:

A copper alloy containing up to 4% lead by weight.
Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectric devices, or in a glass or ceramic matrix compound.
Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC or higher.

Indian Restriction of Hazardous Substances

Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits the use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Product Disposal at End of Product Life

ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more.
USA & Canada: https://www.viewsonic.com/us/go-green-with-viewsonic
Europe: https://www.viewsonic.com/eu/go-green-with-viewsonic
Taiwan: https://recycle.epa.gov.tw/

Copyright Information

Copyright© ViewSonic® Corporation, 2023. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.
ViewSonic® and the three birds logo are registered trademarks of ViewSonic® Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA.
Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.

Customer Service

For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product’s serial number.