AUDIBAX Seattle 500 SUB User Manual

AUDIBAX Seattle 500 SUB

Specifications

• Model No. Seattle 5 00 SU B
• Type Compact line array
• Frequency Response (-6dB) 45 Hz – 20 kHz
• Max. SPL (1m, free space) 121 dB
• Power Output (RMS) 300W + 100W + 100W
• Transducer MF 4″ steel frame woofer, 1″ voice coil
• Transducer HF Pizeo. Tweeter
• Transducer LF 15″ subwoofer, 2.5″ VC
• Amplifier 2.1 Class-D Amplifier
• Protection Short circuit overheating, over-current
• Function MP3 player / BT 5.0 / ECHO
• Indicators Power, signal, limit
• Audio Input / Output Left / Right Combo XLR/Jack input, 1 Balanced RCA input, 2
• XLR output, 2 * Speakon output
• SUB Cabinet 15 mm MDF/ regular painting / Metal grille
• Satellite PP cabient / Metal grille
• Power Input / Output AC input
• Power Supply 115/230V 60/50Hz

Please read and keep all safety and use instructions. Important Safety Instructions Refer to the user manual for more information about your Seattle 500 SUB

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produces heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or third prong is provided for your safety. If the provided plug does not fit in your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way such as power-supply cord or plug is damaged, liquid has been spilled or objects have falleninto the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped

WARNINGS/CAUTIONS

This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that may present a risk of electrical shock. This symbol on the product means there are important operating and maintenance instructions in this guide. Contains small parts which may be a choking hazard. Not suitable for children under age 3. This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

System Setup Connections and Controls

1. LCD Display: Mode, fast forward, reverse, single cycle, pause/play *BT pair connecting: select BLUE in MODE on 2 speakers;
2. USB: Insert the USB into the card slot to play the stored music.
3. SD: Put it in the SD card slot and play the stored music.
4. Jack Input: Balanced L/R 6.3mm Jack input for getting signals from mixers or preamplifiers.
5. MIC Volume Control: Adjust the volume of microphone.
6. MIX Out: Balanced XLR connectors connected in parallel to the inputs to connect another device (e.g. another active speaker system)
7. Speaker Out: Balanced RCA connectors connected in parallel to the inputs to connect speaker.
8. Indicator Light / Phase Switch: Limit / Power indicator light, allows user to reverse phase 180°.
9. Sub Volume Control: Adjust the volume of subwoofer.
10. FREQ Volume Control: Adjust the volume of FREQ.
11. Master Volume Control: Adjust the master volume.
12. MP3/BT Volume Control: Adjust the volume of MP3/BT.
13. XLR Input: Balanced L/R XLR input for getting signals from mixers or preamplifiers.
14. ECHO Volume Control: Adjust the volume of ECHO.
15. MIC XLR Input: Balanced MIC1/MIC2 XLR input for getting signals from mixers or preamplifiers.
16. Power Supply Voltage Switch: Select between 115V or 230V AC mains power.
17. Power Switch: Turns unit on or off.
18.  AC Input: 115V-60Hz / 230V-50Hz power input.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>