Shenzhen Xinke Meida Communication Co Ltd RD36 Wireless Smart Headset Instruction Manual

Shenzhen Xinke Meida Communication Co Ltd RD36 Wireless Smart Headset

Product Information

Product Name: RD36 Wireless Smart Headset

Product Description: The RD36 Wireless Smart Headset is a binaural wireless headset with smart digital display and various functions such as volume control, music playback, voice assistant, and call management.

Package Contents

• Charging box x 1
• Left and right earphones x 1
• Data line x 1
• Product Specifications x 1

Configuration Parameter

• Standby Time: 240 hours
• Talk Time: about 48 hours
• Chip Version: 5.3
• Charging Time: about 1-2 hours

Certificates

• FCC 15: Compliance with FCC regulations for electromagnetic interference.

Product Warranty

This product comes with a warranty card. Please keep it properly for any future warranty claims.

Product Usage Instructions

Mode of Operation

1. 1.  **The Boot:**

   • (1) Open the cover of the charging box to automatically turn on the headphones. A voice prompt “Boot” will be heard and the green light will be on for 1 second.
   • (2) If the headset is off, press the function key for about 3 seconds. A voice prompt “Boot” will be heard and the green light will be on for 1 second.
2. To Turn It Off

  * (1) Put the headphone back into the charging box and close the cover. A voice prompt “Turn off” will be heard and the white light will be on for 1 second.
  * (2) In the case of headset boot, long press the function key for about 6 seconds. A voice prompt “Off” will be heard and the white light will be on for 1 second.
3.  **Restore Factory Settings:**

If the headphones are not connected to the phone, five-click one of the earphone function keys to restore factory settings. A sound of “Off” will be heard and the white light will be on for 1 second.

1. 1.  **Switching Between Chinese and English:**

If the earphones are not connected to the phone, you can switch between Chinese and English by three clicks on the power button of one of the earphones.

Instructions For

• The Volume: In music state, long press the function key of the right ear (R) for 0.5 seconds to adjust the volume (be careful not to shut down).
• Play the Next Song: In music state, three-click the function key of the left ear (L) to play the next song.
• Voice Assistant: Connected to any earphone (L/R), four-click the function keys to activate the voice assistant.
• The Volume +: In music state, long press the function key of the left ear (L) for 0.5 seconds to increase the volume (be careful not to shut down).
• Play/Pause Music: In music state, double click on the function key of any earphone (L/R) to play/pause the music.
• Play the Previous Song: In music state, three-click the function key of the right ear (R) to play the previous song.
• Answer/Hang Up the Phone: In call status, double click on the function key of any earphone (L/R) to answer/hang up the phone.
• Refuse to Answer the Phone: Under incoming call status, long press the function key of any earphone (L/R) for 1.5 seconds to refuse the call.

BINAURAL KEYS ARE SHARED

• Step 1: delete the connection information on your phone, and then turn off your Bluetooth.
• Step 2: put the headset back into the charging bin and wait 30 seconds
• step 3: take out the headset and put it on your ear
• Step 4: double-click on one of the headphones and wait for about 3 seconds. Both headphones will sound at the same time
• step 5: turn on your phone’s Bluetooth connection.
• PS: When you have a pair of ears, only one of the headphones flashes again. If both headphones flash, you have a pair of unpaired ears

PAIRING NAME

• RD/RD36;

SMART DIGITAL DISPLAY

MODE OF OPERATION

THE BOOT

1. Open the cover of the charging box, take out the headphones immediately automatic boot, voice prompt“Boot”, green light for 1 second.
2. Headset off state, press the function key about 3 seconds, voice prompt“Boot”, green light for 1 second.

TO TURN IT OFF

1. Put the headphone back into the charging box and close the cover. Sound the word“Turn off” and the white light will light up for 1 second.
2. In the case of headset boot, long press function key about 6 seconds, voice promp“t Off”, white light on for 1 second.

RESTORE FACTORY SETTINGS

• Headphones are not connected to the phone case, five-click one of the earphone function key, sound ‘off’ white light for 1 second.

SWITCHING BETWEEN CHINESE AND ENGLISH

• When the earphones are not connected to the phone, you can switch between Chinese and English freely by three clicks on the power button of one of the earphones.

INSTRUCTIONS FOR

The volume –

• In music state Right ear(R) Long press for 0.5 seconds (Be careful not to shut down)

Play the next song

• In music left ear state(L) Three click function key

Voice assistant

• Connected Any (L/R) Four click function keys

The volume +

• In music left ear state(L) Long press for 0.5 seconds (Be careful not to shut down)

Play the previous song

• In music state Right ear(R) Three click function key

Refuse to answer the phone

• Under incoming call status Any (L/R) Long press for 1.5 seconds

Play/pause music

• In music state Any (L/R) Double click on the function key

Answer/hang up the phone

• In call status Any (L/R) Double click on the function key

PRODUCT INTRODUCTION

1. Charging box *1
2. Left and right earphones *1
3. Data line *1
4. Product Specifications *1

CONFIGURATION PARAMETER

• Standby time: 240 hours
• Talk time: about 48 hours
• Chip version: 5.3
• Charging time: about 1-2h

warranty

Product warranty card
This card is the product warranty certificate, please keep it properly

• Undesirable phenomenon

FCC STATEMENT

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:

1. This device may not cause harmful interference;
2. this device mustaccept any interference received, including interference that may cause undesired operation;

Note: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co- located or conjunction with any other antenna or transmitter.

When using this product, please read the instruction carefully and keep it for reference.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>