DIGITALAS YET610 Universal Infrared Sensors User Guide
- June 3, 2024
- DIGITALas
Table of Contents
DIGITALAS YET610 Universal Infrared Sensors
MODEL : YET610
TECHNICAL SPECIFiCATIÓNS
- Technology Infrared RECEVER
- RANGE 15m
- Range can be reduced to 30% in bad weather conditions:for,rain, dust,etc.
- Infra-Red Frequency 1.92 KhZ
- POWER SUPPLY 12 to 24V DC/AC
- WAVE LENGTH 940nm
- INPUT RX 15mA – TX 30mnA
- OPERATING TEMPERATURE -10C to 70C
- RELAY OUTPUT TA max 36V
- DIMENSIONS 100X35X40MM
CONNECTING THE SENSOR
Installation
The best install height should big in 20 cm, install distance to be no smaller than 2 meters. Install should make red outside the protection equip perpendicularity to place.and is on-line at same level. Install should install first to receive part, and install the blast-off part again. When together at always a line. receive the OFF light in the machine In order to put out, then fix. connect the line to install completion namely.
Attention:
Because this product’s shoot power compare big, so when the shoot machine with
receives the machine distance too near an hour will appear to have no
phenomenon of reaction, at this time should draw back one meter at least
behind again try. When installing distance very near, discover not an
intelligent phenomenon, can shoot and receive the medium of the condensing
lens removed, can immediately raise an intelligent degree.
MOUNTING THE SENSOR
Rotation through 180° allows the alignment of the photocells irrespective of the way they are fixed to the base