DIGITALas NI-610 Rod Electromechanical Lock User Manual
- June 9, 2024
- DIGITALas
Table of Contents
DIGITALas NI-610 Rod Electromechanical Lock
FUNCTION
This is the self contain device whose securing element,the bolt is directly moved by a solenoid. The voltage used can be 12VDC or 24 VDC optional. There is LED light indicator to show the status of lock and to show the status of doors.The delay timer can be set 0/3/6/9 seconds.
INSTALLATION
- please read the specification before installation,Please also check the all the accessories and go through the wiring diagram.
- The product contains 2 parts.which are lock body and strike.The gap between the lock body and the strike should be less than 8mm,make sure the bolt can go into the hole of the strike plate.
- There a re 5 types of wires, Red—(+), Black—(-), Orange—(OPE N ), Green—(N O ), Wh ite—(COM)
- Setting of wiring diagram,please refer to picture 3.
- Setting of delay time,0/3/6/9 second.please refer to picture 1.
- installation dimension:please refer to picture 2.
PARAMETERS
- Voltage: DC12V10%
- Current: Start Current is 960mA,Standby current: 130mA
- Open-Contact: Connect ED and ORANGE together
- LED: RED when the bolt being withdraw.GREEN when the bolt being projected
–Au-t.G-1-G-G-k-t-i me de I a y : 0/ 3 /6 /9•–R-H—– —
BoIt: Stainless steel, 12.6mmDIA, 17mm throw
- Face plate: 192Lx25Wx37H(mm)
- Strike: 100Lx25Wx3H(mm)
**WIRING DIAGRAM
**
INSTALLATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>