DIGITALAS A260 Smart Digital Lock User Manual

DIGITALAS A260 Smart Digital Lock

User Manual – Smart Digital Lock A260 TTLOCK VERSION
Search Google Play or APPLE Store with TTLOCK
Password
Fingerprint
Smart your life!
Version 1.0 Edition 2020

PACKING ACCESSORIES Please check the packing box and accessories when you receive the lock.

• 1 Pcs Front Panel
• 1 Pcs Back Panel
• 1 Pcs Mortise
• 1 Pcs Strike Plate
• 1 Pcs Strike Box
• 1 Pcs M5x60
• 1 Pcs M5x40
• 1 Pcs 70L Spindle
• 4 Pcs ST4x20
• 1 Pcs Cylinder
• 2 Pcs Mechanical Key

PRODUCT SPECIFICATION

• Back Panel
• Keypad Induction Area
• Door Bell
• Battery Box
• Fingerprint Sensor
• Back Handle
• Privacy Button Speaker
• Cylinder Micro-USB

SYSTEM INTRODUCTION

• Factory Password
• Virtual Password User Capacity
• Material: Aluminum Alloy, ABS, Acrylic
• Color: Black/Satin Nickel
• Door Thickness: 35-55mm
• Bluetooth Compatibility: iOS 7.0 or above, Android 4.4 or above
• Battery Life: 7000 times normal unlock (10-12 months)
• Battery Type: DC6V – 4pcs AA alkaline batteries
• Standby Current: 50uA

TO OPEN AND CLOSE & BELL FUNCTION
To open the door, you can either enter a valid password, touch the IC card, or press your finger on the fingerprint sensor. To close the door, simply push it closed.Bell function: Press the button “#” to ring the bell.

User Manual-Smart Digital Lock
A260 TTLOCK VERSION

Scan the OR code below to download the APP

Search Google Play or APPLE Store with TTLOCK

PACKING ACCESSORIES

Please check the packing box and accessories when you got the lock in hand.

PRODUCT SPECIFICATION

TO OPEN AND CLOSE &BELL FUNCTION
Enter the valid password or touch the IC card or press the finger to open the door.
Bell function: You can press the button“#”to ring the bell.

SYSTEM INTRODUCTION

RESET TO FACTORY STATE

ATTENTION

There is one Reset button on the back of rear panel.
You can press this button for 5 seconds with two sound tip, then the lock is under factory state, the default master password is: 123456 you can open the door with any password or fingerprint.

DEAD LOCK FUNCTION

ATTENTION

There is one privacy button on the back panel.
You can pull upward this button with sound tip“Locked”,then the lock is dead locked inside, only the administrator can access the door, other user password or card will be invalid.
And you can pull downward the button one more time with sound tip“Unlocked”to cancel this function.

INFORMATION AND SAFETY WARNINGS

1. Introduction
   This user manual will guide you through the functions and usages of our A260 Wi-Fi smart lock. It is important that you follow the instructions and regard all notes that appear throughout this manual.
   Consult this manual before you attempt to use this lock. If you have any questions that not answered by this manual or on need of non-routine service, please call our customer service hotline or send FAQ to us.

2. Safety Warnings:
   When reading this manual, note these icons: notes with the icon Must be read, understood and obeyed to prevent injury or damage to the lock.

General Usage

• This lock shall only be used as described in this manual.

• Verify that all parts of the lock are accounted for. If any parts are missing, please contact our service person.

• Under factory default state, the lock is on always open status after you install the lock(no power on).
  It means the handle is free and lock can’t be locked, you shall power on the lock with batteries or set admin and pair the lock with the APP and then the lock will be under private mode automatically.

• Handle directions are reversible, please kindly follow chapter 6 to change the direction if the door opening direction is not same with your lock. Should you have any problem, please contact our service person.

• There is protective film on the front touch panel, if there are some scratches on the film, please remove the film if you need.

• Please use 4pcs AA batteries. Do not mix old and new batteries or other Zn/M batteries.
  Never insert objects into the lock other than batteries as described in this manual.

• Verify all surfaces are flat and level before beginning installation, installation on doors or surface with any types of deformity such as gaps or warping may cause the lock to malfunction or fail to operate entirely.

• Never apply any cleaner directly to any part of this lock. Only use clean water or mild cleaner on a soft non-abrasive cloth when cleanina.

• Potential shock warning: do not allow water or liquids to get into the lock’ s electric parts.

• The lock must be used with TTLOCK APP. The lock will function without the APP but full functionality may only be achieved when the APP is on use.

SALES AND SERVICE TERMS

• Please read the manual carefully before use!

• Limited 1-Year Electronic Warranty Limited Lifetime Mechanical and Finish Warranty
  This A260 product comes with a 1-Year Limited Warranty on Electronic Parts and a Limited Lifetime
  Mechanical and Finish Warranty against defects in materials and workmanship under normal use to the original residential user. Proof of purchase and ownership is required for the warranty to be in effect.

• Any change submit to our confirmation

• Any error or question in our manual or sales term, please feel free to contact with us.

• It is forbidden to copy our manual and for other usage, except the authorized company and users.

• For any wrong operation or installation to the user or third party, we do not responsible for the duty.

• For the damage caused by anthropic factor or inevitable reason, we do not pay for the loss or maintain for tree, please check our after sale service terms.

• Please do not take apart the lock if you are not technician, if necessary, please make the operations under the guide of technician.

• Notice: there maybe a little difference for product pictures with real product, please subject to our real products.After changing the battery, please do not throw away the battery, kindly refund to recycle bin in case of pollution!

PREPARING TO INSTALL

Line Drawing
Draw a horizontal center line inside and outside the door at 1 meter from the ground. Fold the hole template, make the handle center line align at the door horizontal center line, then draw out the hole lines at front and side.

Drawing Center Line

Adjust Direction

Adjust from Right to Left Direction (For Sample)

1. Use the allen key to take off the screw on the right position.
2. Turn the handle to 180 degree counterclockwise
3. Tighten the screw in left position.

Adjust from Right to Left Direction (Back Panel)

1. Use the allen key to take off the screw on the right position.
2. Turn the handle to 180 degree counterclockwise.
3. Tighten the screw in left position.

INSTALL THE LOCK

1. Assemble the Mortise
   Assemble the mortise(c) into the slot which is drilled according to the template (45/85 Mortise).

2. Assemble the Front Panel
   Fix the front panel(a) on the door and cross the cable through the hole.

3. Connect the Cable
   Insert the 70L spindle on mortise, cross the cable through the hole and connect with the PCB board.

4. Fix the Lock Panel
   Tight the back panel with front panel with the two long screws.

5. Assemble the Battery Box
   Put 4pcs AA alkaline batteries and fix the battery box cover.

6.  Adjust the Lock Panel
   After finishing installation, please adjust the position of the lock panel or the screws whether it is too tight.Test with password: 123456 and turn the manual key and then press the handle to open.

OPERATION STEPS

Please enroll the administrator before you start to use this lock. you can follow the operation steps as below:

Initialization

1. Press the reset button and hold 3 seconds
2. Please input initialization passcode,enter: 000#, with sound : “Successful”

Change Language

Factory state: Default master passcode is:123456.

1. Press *39 #123456#2# Change to English voice tip
2. Press *39 #123456#1# Change to Chinese voice tip

Enroll Mobile Administrator

1. Factory state: press *12#123456#new passcode#new passcode#.
2. You can use the mobile APP to add the Bluetooth administrator.
   When adding the door locks, operations must be completed near the lock.

Change Master Passcode
you can find the new master passcode in the mobile APP under “Settings”.
also you can edit the master passcode on App directly and upload Admin passcode to the lock like the below photo.

you can also change the master passcode on the lock directly.
Please find the operation steps below:

1. Press *12 #

2. Please input Administrator passcode
   For sample: 123123

3. Input new Master passcode
   Such as:654321

4. please input again

5. Operation successful!
   You can test the new passcode

Enroll User Fingerprint

1. Press *80 # button

2. Please Input Administrator passcode

3. Please enter fingerprint or passcode
   Press your finger

4. please press again

5. Input successful!
   You can continue to add the new fingerprint

Delete User Fingerprint

1. Press *70 # button
2. Please Input Administrator passcode
3. Operation successful!
   All fingerprints are deleted.

APP operation: you can deleted the added fingerprints one the lock and server.

Enroll User Password

1. Press * 80 # button by sequence
2. Please Input Administrator passcode
3. Please enter passcode,confirm with # key. such as:654321
4. Please enter again
5. Input successful!
   You can continue to add the new passcode

Under the mobile APP, you can upload the added passcodes to the lock and server.

Delete User Passcode

1. Press *71 # button by sequence
2. Please Input Administrator passcode
3. Operation successful! all passcodes are deleted.

Under the mobile APP, you can find the added passcodes, you can edit any passcode and click Delete button to delete the passcode.

Enroll User Card

1. Press * 80 # button by sequence
2. Please Input Administrator passcode
3. Please enter fingerprint or passcode
4. Input successful!
   please input fingerprint or passcode

Under the mobile APP, you can upload the added cards to the lock and server.

Delete User Card

1. Press *69 # button by sequence
2. Please Input Administrator passcode
3. Operation successful! all user cards are deleted.

Under the mobile APP, you can find the added IC Cards, you can edit any username and click Delete button to delete the card, also you can choose upload IC Cards to ensure the card is deleted in the server.

Passage Mode

Unlock the door with any valid passcode or fingerprint.
Press 123# button during the time of unlocking.
Sound tip: the lock set to passage mode Then the lock is under always open state, you can enter any valid passcode or fingerprint to cancel this function.

Unlock Records
You can find the unlock records for the passcode/IC Card/Fingerprint etc.
More details, you can refer the manual of our TTLOCK App operation steps.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>