GLOBAL 436978BK 6 Inches Aluminum Park Bench w/ Backrest User Manual
- June 3, 2024
- GLOBAL
Table of Contents
GLOBAL 436978BK 6 Inches Aluminum Park Bench w/ Backrest
WHAT IS IN INCLUDE
Warning
- Assembly and installation of equipment should be performed by 2 people.
- Workers should use OSHA-approved safety and lifting equipment.
Warning
- Ensure that the bench is installed on a level surface.
- Ensure surface is of a strong material, preferably concrete.
- Use proper mounting hardware.
Warning
- Do not climb on, under or through tables and benches.
- Two people required to move tables and benches.
- Do not use if any parts of bench or table are broken o damaged.
- Inspect and tighten hardware every six months.
- Replace rusted hardware and damaged components.
Aluminum Park Bench With Backrest
-
Step 1:
Connect the 2 support tubes (Ref. B) with both legs (Ref. A) with bolts (Ref F). Do not fully tighten. -
Step 2:
Place both support ribs (Ref. E) evenly spaced on top of the support tubes. -
Step 3:
Insert and connect both end slats and slats (Ref. C and Ref. D) in between the legs with screws (Ref. H) on both ends. Do not fully tighten. Repeat this with both the seat and backrest slats. -
Step 4:
Screw down the support ribs with the self-drilling screws (Ref. G). Fully fasten all screws.
NOTE: Mounting hardware is not included.User Manual
User’s manual
Customer Service
US: 1-800-645-2986
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>