RAB NDLED4SD-WY-B-S LED Downlights Owner’s Manual
- June 3, 2024
- RAB
Table of Contents
RAB NDLED4SD-WY-B-S LED Downlights
High-end, new construction LED downlights in 4″ make installation a breeze when you’re framing out a space from the ground up or when you have access from the top of the ceiling.
- Color: Silver trim black cone
- Weight: 1.2 lbs
- Project: ………………………………………….
- Type: ………………………………………….
- Prepared By: ………………………………………….
- Date: ………………………………………….
Driver Info
Type Sold Separately
- 120V N/A
- 208V N/A
- 240V N/A
- 277V N/A
Input Watts See Rough-in
LED Info
- Watts: 0W
- Color Temp: 3000K (Warm)
- Color Accuracy: 80 CRI
- L70 Lifespan: 100,000 Hours
- Lumens: N/A
- Efficacy: N/A
Technical Specifications
Compliance
- UL Listed: Suitable for wet locations covered ceiling
Construction
Trim Component: This component must be ordered with New Construction Square Rough-In in order to make a complete fixture. See here for New Construction Square Rough-In.
Housing: Professional-grade, die-cast aluminum construction
Trim Ring: Silver powder coated die cast trim ring
Trim Cone: Black square trim cone
Drop Ceiling Installation: NDLED can be installed in drop ceiling tiles when using optional c-channel bars and following local construction codes.
Aperture Size: 4″ Trim Module
Junction Box: Integral junction box with wiring capacity for Min 90°C supply conductors 4 in 4 out
Easy Installation: The EZ-Connector makes installation easy
Electrical
Dimming Driver: 0 – 10V (at 120-277V), TRIAC and ELV (at 120V only).
See dimmer compatibility guide here.
Dimming: Dimmable. Requires rough-in with dimming driver.
Optical
Optics: Wall wash optics engineered for wide lateral distribution and smooth soft light from ceiling to floor.
LED Characteristics
Color Consistency: 3-step MacAdam Ellipse binning to achieve consistent fixture-to-fixture color.
Warranty
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty.
Buy American Act Compliance: RAB values USA manufacturing! Upon request, RAB may be able to manufacture this product to be compliant with the Buy American Act (BAA). Please contact customer service to request a quote for the product to be made BAA compliant.
Dimensions
Features
- Butterfly bracket allows mounting with bar stock, “C” channel, 1/2″ conduit or nailer bars
- Low-profile design allows for installation in ceilings with limited space
- Absolute White 3-step consistency and black body accurate
- The nanostructure lens eliminates “hot spots” providing smooth and efficient light
Ordering Matrix
Need help?
- Tech help line: 888-722-1000
- Email: sales@rablighting.com
- Website: www.rablighting.com
Copyright © 2021 RAB Lighting All Rights Reserved.
Note: Specifications are subject to change at any time without notice
References
- Legal - RAB Lighting
- Welcome to RAB
- LED Downlights - RAB Lighting
- rablighting.com/images/downlights_dimmer.png
- Legal - RAB Lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>