SHARPER IMAGE Sound Soother Sleep Bed Time Light and Sounds Instruction Manual

SOUND SOOTHER®
SLEEP
BEDTIME LIGHT AND SOUND

SAFETY WARNINGS:

• Keep power cable out of reach of children.
• Do not expose to moisture or extreme temperatures.
• Do not attempt to use this product for other purposes.
• Inspect the product before every use. If any piece appears cracked or broken with the potential for an internal magnet to fall out, discontinue use and discard it immediately

WHAT YOU GET

a. around Soother® Sleep
b. USB-C Power Cable

GETTING STARTED POWER

1.  Plug the USB-C end of the power cable into the port on the bottom of the Sound Soother® Sleep.
2. Plug the USB-A end of the power cable into a USB power adapter (not included).
3. Plug the USB power adapter into a wall outlet. Note: The clock will keep time for 5 days when unplugged from a power source and will automatically sync when plugged in and connected to the mobile App.

WIRELESS PAIRING

1. Power on the Sound Soothers Sleep to automatically enter pairing mode.
2. Enable Bluetooth functionality on your compatible device and select “SI Sleep’ from the menu.
3. Play audio through the Sound Soother® Sleep as a wireless speaker or download the mobile app for additional functionality.

HOW TO USE

LIGHT

1. Press the light button to cycle through the 3 brightness settings- low, medium, and high.
2. Press the light button again to turn off the light.

CLOCK

1. Long press the clock button to enter time setting mode. The clock will flash
2. Use the +/- buttons to set the hour.
3. Press the clock button again to switch to the minutes.
4. Use the +/- buttons to set the minutes.
5. Press the clock button again to save and exit
6. Double tap the clock button to switch between 12h and 24h time formats.

ALARM

1. Long press the alarm button to enter alarm setting mode.
2. Use the +/- buttons to set the hour.
3. Press the alarm button to switch to the minutes.
4. Use the +/- button to set the minutes.
5. Press the alarm button to switch to alarm sound selection and use the +/-button to select the preferred alarm sound
6. Press the alarm button again to save and exit
7. Quick press the alarm button to the alarm on or off.

VOLUME

1. Press the minus (-) button to decrease speaker volume.
2. Press the plus (+) button to increase speaker volume.

SNOOZE

1. When the alarm is going off, quick press the touch button above the display to snooze the alarm for 9 minutes.
2. When the alarm is going off, double press the touch button above the display to turn off the sound until the next day. Light will stay on.
3. When the alarm is going off, long press the touch button above the display to turn off the sound and light until the next day.

DISPLAY

1. Quick press the touch button above the display to cycle through the display brightness levels or turn off the display.
2. Long press the touch button above the display to turn it off from any brightness level.

MOBILE APP SETUP

1. Download and install the Sharper Image() Sleep app onto your smartphone. Scan the below OR code or search ‘Sharper Image Sleep” on the App Store or Google Play.
   |
   ---|---
   https://apps.apple.com/cn/app/id1630357934| https://play.google.com/store/apps/details?id=com.nod.wake
2. Open the app and allow Bluetooth permissions when prompted.
3. Select “SI SLEEP” to connect the Sound Soothe’ Sleep to your device.

FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC ID: 2AEVM1013312

CONGRATULATIONS ON YOUR PURCHASE OF THE SOUND SOOTHER° SLEEP.
Please read all instructions and warnings prior to use. Keep this manual as it contains important information for future reference.
SHARPER IMAGE NAME AND LOGOS (INCLUDING
THE 77 LOGO) ARE TRADEMARKS OR REGISTERED TRADEMARKS. DISTRIBUTED BY AND © 2021
MERCHSOURCE, LLC. IRVINE, CA 92618. ALL RIGHTS RESERVED.
FOR CUSTOMER SUPPORT, PLEASE CALL 1-800-374-2744
PRINTED IN CHINA.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>